Monoprice 39305 User manual

Installation Guide
P/N 39305
Monoprice Above Fireplace Pull-Down Full-Motion
Articulating TV Wall Mount with Soundbar Mount- For TVs
42in to 65in, Max Weight 62 lbs, VESA®Patterns Up to
600x500, Rotating , Height Adjustable

AA.
X 4
X 1
X 1
X 1
X 1
X 2
X4
CC.
EE.
HH.
BB.
DD.
X 2
GG.
X 1
II.
X 1
FF.
INCLUDED HARDWARE
F: M8 x 35 mm
x4
E: M8 x 20 mm
x4
D: M6 x30 mm
x4
B: M5 x 30 mm
x4
C: M6 x 15 mm
x4
A: M5 x 15 mm
x4
H: M5 / M6
x9
I: 5 mm
x8
J: 13 mm
x4
G: M8 x 50 mm
x4
L: M8
x6
K: M8 x 70mm
x6
M: Concrete Anchor
x6
N: M8 x 60 mm
x4
O: M6 x 15 mm
x2 x2
P: M6
x5
mm52x4M:S6M:Q
x2
R: M6 x 8 mm
x8
T: M5 x 8 mm
x4
X: 5 mm
W: M6 Y: 8 mm Z: 8 mm 8ft Premium
HDMI Cable
Carpenter’s
Level
U: Cable Ties V: Arm Lock Pin
2

REQUIRED TOOLS (Not Included)
SAFETY WARNINGS AND GUIDELINES
You will need the following tools for installation
Stud Finder Pencil Protective Eyewear
Socket Wrench Thermometer1/2" SocketPhillips Screwdriver
Drill 1/4" Drill Bit
Please read this entire manual before using this device, paying extra attention to these safety warn-
ings and guidelines. Please keep this manual in a safe place for future reference.
• Do not exceed the rated weight limit. Doing so can cause the mount to fail, resulting in equipment
damage and/or severe personal injury.
• Ensure that the structure to which this mount will be installed is capable of supporting at least four
times the total weight of the mount and any connected displays.
• Use the supplied mounting screws. Tighten the screws using the appropriate tool, but take care
not to over-tighten them.
• This device is intended for indoor use only.
• This device contains small parts that could pose a choking hazard to small children. Keep this
device and its spare parts out of reach of children.
• Inspect the installation at least once every three months to ensure that it is secure and safe to use.
• Please take an inventory of the package contents to ensure you have all the items shown in the
Parts List. If anything is missing or damaged, please contact Monoprice Customer Service for a
replacement.
3

Mount your television conveniently above your fireplace using this Above Fireplace Mount. It
is capable of supporting televisions weighing between 11 and 62 lbs.with VESA®patterns
compatible from 100x100mm to 600x500mm. The mount can be pulled down to eye level for
comfortable viewing. The mount allows you to move the television safely away from the heat
when the fireplace is in use.
Additional Features Include:
• Adjustable sides to accommodate displays from 42"-65" at 11-62 lbs
•VESA®compatibility (100x100 - 600x500)
• Full Motion mount that allows for ±30° swivel, ±5° rotation and +10°/-5° tilt adjustment
• The Mount pulls down for comfortable viewing and lays flat to save space when not in use
• Designed to mount above fireplace mantels
INSTALLATION AND OPERATION
1. Use a thermometer to assess the temperature above the fireplace. The temperature at the
front of the fireplace mantel must never exceed 100 degree F. Additionally, if the wall is warm
to touch it is not suitable for installation.
2. For installation to wooden studs, ensure that the studs are spaced no more than 24 in. apart
and the dry wall is no more than 5/8" thick. The studs should be symmetrically positioned or
the installation will not be symmetrical to the fireplace mantel.
3. The fireplace mantel must extend no more than 24 in. (60.9 cm) from the surface of the wall
FEATURES
Mantel must NOT
extend more than
24" from the wall
≤24"
STUDS
100°F Max
4

INSTALLATION
Mantel size
Less than 8” Wallboard height +5”
8”~11” Wallboard height +9”
11”~13” Wallboard height +11”
13”~16” Wallboard height +14”
Space height
4. This mount is intended for flat screen televisions (LCD, LED, Plasma) only. The
mounted television should be between 55 ~ 80" and weigh between 55~132 lbs.
5. The vertical space above the mantel must be greater
than the height of the wallboard .The required vertical
space depends on how far the mantel extends out
from the wall.
Use a tape measure to determine the center point of the mantel. Mark the centerline with a
pencil or tape.
Use a stud finder to locate the two studs on the wall and measure the distance between the
two.
5
Mantel
Extends

WOOD
1
To determine the height distance
from the mantel, reference step 5
on page 5.
Be sure to drill into the center of
the wood stud.
6

2BRICK OR CONCRETE
10mm
8
Insert Concrete Anchor (M)
To determine the height distance
from the mantel, reference step 5
on page 5.
7

3
4
5
5mm
N
Q
H
8

6
7
BRICK
OR
CONCRETE M
KL
KL
WOOD
9

8
9
10
Lock the arm
V
A - G
H
I - J
or
O
P
5mm
10

11
11
12
a.
W/O Soundbar
R
R
b.
With Soundbar
11

13
14
15
Please adjust the Handle distance
to the height of the sound
Q
H
12

16
17
18
T
HH
13

19
Keep the TV’s height
in this angle.
Adjusting the force value
in this state is the easiest.
Release
Adjustable the bracket’s constant force
Attention: The weight of the TV set in the weighing range
“ + ” :Increase the constant force
A: The TV sets can stay at any height.
B: Turn to “ - ” until the bracket is free hovering.
C: Turn to “ + ” until the bracket is free hovering.
“ - ” :Reduce the constant force
90°
14

19 -2
19 -3
B: The TV sets up
Adjust until free hovering
Turn to “ ”
8mm
C: The TV sets down
Z
+
15

19 -4
20
21
8mm Z
+
Adjust until free hovering
Turn to “ ”
Level adjustment
±5°
a. b.
Height adjustment 9.1"
9.1"
16

22
23
Tilt adjustment
-5 ~ +10°
Swivel ±30°
(TOP VIEW)
(SIDE VIEW)
17

24
25
26
wire
cable
Cable ties
Cable Ties
Pull in the cover plates
4.7(Min)
28.7(Max)
20.1(Max)
UP
Down
+10°/-5°
8.6
UP
Down
13.6
26.8
16
24
Ø3.5
3.9
3.9
7.9
3.1(Min)~11.8(Max)
3.5
Ø0.3
±5°
7.9(Min)~24.8(Max)
26.1(Max)
Ø0.3
±30°
Units: Inches
18