Monster Clippers M03 User manual

MONSTERTRIMMER
manual
8096 Manual.indd 18096 Manual.indd 1 16-04-20 15:2616-04-20 15:26

IMPORTANT SAFEGUARDS | 4
DESCRIPTION OF PARTS | 7
OPERATING INSTRUCTIONS | 8
CHARGING THE BATTERY | 8
CORDED OPERATION | 8
BATTERY OPERATION | 9
TRIMMER CARE | 10
BLADE CARE & OILING | 10
UNIT CARE | 11
REPLACING OR RE-ADJUSTING THE BLADES | 12
USING ATTACHMENT COMBS | 13
GUIDELINES FOR LITHIUM-ION BATTERIES | 14
TROUBLESHOOTING | 15
3
2
8096 Manual.indd 28096 Manual.indd 2 16-04-20 15:2616-04-20 15:26

Cordless Trimmer Instructions MODEL M03
Please read the following instructions carefully before using your new
Monster Trimmer. Save these instructions for further reference.
THIS PRODUCT IS INTENDED FOR PROFESSIONAL USE.
For more information or assistance call our customer service centre
T: [phone]
W: www.monsterclippers.com
E: customerser[email protected]
3
2
8096 Manual.indd 38096 Manual.indd 3 16-04-20 15:2616-04-20 15:26

IMPORTANT SAFEGUARDS
When using an electrical appliance, basic precautions should always be
followed, including the following: Read all instructions before using the
Monster Trimmer.
REQUIREMENTS
• Pay attention to the rating voltage.
• An appliance should never be left unattended when plugged in.
• Use this appliance only for its intended purpose.
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety
• Children should be supervised to ensure that they do not play with the
appliance.
HAZARDS
Danger: risk of fire, electric shock, or injury to person due to damaged product
• Do not operate the appliance with a broken cord, plug or charger, or if
it is not working properly, if it has been dropped or damaged in anyway.
• Any examination or repair must be performed by a qualified professional.
• Do not use attachments not recommended by Monster Clippers because
they may cause fire, electric shock or injury and damage to the appliance.
• Use of a charger not sold by Monster Clippers may result in risk of fire,
electric shock, or injury to person.
• Do not disassemble charger. Incorrect reassembly may result in a risk
of electric shock or fire.
• Plug adapter cord directly into an AC outlet. Do not use an extension cord.
5
4
8096 Manual.indd 48096 Manual.indd 4 16-04-20 15:2616-04-20 15:26

Danger: Electric shock due to penetration of liquid
• To protect against risk of electrical shock never immerse the unit or let it
come into contact with water or other liquids. Do not use the unit with wet
hands. If the appliance should become wet, damp or fall in water, remove
plug from mains socket immediately. Do not put your hands in the water.
Do not take into the bathroom.
Danger of explosion
• Never operate the appliance where aerosol (spray) products are being used
or where oxygen is being released
• This appliance contains a lithium-ion battery; exhausted batteries/
rechargeable batteries should not be disposed of in the household waste.
Dispose of them in a completely discharged state in accordance with the
local legal regulations. Do not throw into fire where heat could cause them
to rupture or explode.
Warning: injuries due to incorrect handling
• Do not use this appliance with a damaged or broken blade or comb,
as injury to the skin may occur.
• Switch off the appliance and unplug from outlet when not in use, before
putting on or taking off attachments and also before cleaning the appliance.
• Always turn control to OFF then remove plug from outlet to disconnect.
• Never use your appliance without paying attention! Except when charging
always unplug this appliance from the electricity outlet immediately after
using.
5
4
8096 Manual.indd 58096 Manual.indd 5 16-04-20 15:2616-04-20 15:26

Caution: Danger of product damage
• Keep the cord away from heated surfaces.
• Do not wrap the cord around the appliance charger.
Care should be used to keep the cord untwisted, and undamaged.
• Do not use outdoors or in damp areas.
• Never carry the unit by its power cord.
• Never drop or insert any object into any opening.
• Always store the trimmer with the blade guard covering the blades
A
7
6
8096 Manual.indd 68096 Manual.indd 6 16-04-20 15:2616-04-20 15:26

DESCRIPTION OF PARTS
A. Blade
B. ON / OFF button
C. Blade guard
D. Attachment comb nr. 0,5 = 1,5 mm
E. Attachment comb nr. 1 = 4,5 mm
F. Attachment comb nr. 1,5 = 6 mm
G. Cleaning brush
H. 10 cc Clipper oil
I. Charging stand
J. AC adapter
C D E F G H
I
A
J
B
7
6
8096 Manual.indd 78096 Manual.indd 7 16-04-20 15:2616-04-20 15:26

OPERATING INSTRUCTIONS
CHARGING THE BATTERY
The AC adapter is intended for use with Monster Clipper model M03 lithium-ion
trimmer battery with a rated capacity of 5V 1.5A.
Plug the AC adapter/power cord into an outlet at the correct voltage.
Plug the adapter cord into the receptable on the back of the charging stand
(figure 1) and place trimmer in the charging stand with the Monster Clippers
logo facing forward.
Make sure that the trimmer is switched OFF
when charging. Note that the trimmer can be
removed at any time during the charging cycle
without harming the trimmer or battery.
The trimmer has not been charged at the factory.
Please charge the trimmer for about 60 minutes
before the first use for maximum performance.
You can keep the trimmer plugged into the
charging stand or AC adapter when not in use.
CORDED OPERATION
If the trimmer powers OFF in the middle of a trimming
job, the power cord can be attached to continue use
in corded operation. For corded operation, disconnect
the AC adapter/power cord from the back of stand and
connect the receptacle on the bottom of the trimmer
(figure 2). If the battery is completely run down, allow it
to charge for one till two minutes (switched OFF) before
you start using it as a corded trimmer.
figure 2
9
8
figure 1
8096 Manual.indd 88096 Manual.indd 8 16-04-20 15:2616-04-20 15:26

The trimmer will charge at a slower rate while in use with the cord attached.
The charging stand or AC adapter will maintain the battery at full charge
(switched OFF) . When the trimmer won’t be used for a week or more we
recommend that you unplug the charging stand or AC adapter.
BATTERY OPERATION
Switch the trimmer ON using the ON / OFF button and, after use, switch it OFF
again. When the battery is fully charged, the equipment can be used for up to
120 minutes of continuous run. The Monster Trimmer model M03, by design,
will run at full power until the battery is fully depleted.
9
8
8096 Manual.indd 98096 Manual.indd 9 16-04-20 15:2616-04-20 15:26

TRIMMER CARE
BLADE CARE & OILING
You can clean the excess hair from your blades by
using a small cleaning brush. Any excess hair and
dirt that has accumulated between the blades should
come out by using the Monster Clippers Clean & Cool
Spray (sold seperately). This maintenance spray cools,
cleans, lubricates and protects the cutting blade.
For longer durability and a smooth performance.
A quick and easy way to clean the blade of impurities!
To ensure durability and maintain performance,
we recommend oiling the blades before, during
and after each use.
FAILURE TO REGULARLY CLEAN AND OIL
THE BLADES WILL VOID THE WARRANTY.
When you feel your trimmer blades leave streaks or slow down,
it’s an indication that you need to oil your blades.
To oil it properly, the trimmer should be held so the blades are
in a downward position. Place one drop of Monster Clippers oil
(sold seperately) in the center of the movable top blade and one
drop of oil on each end of the top blade. Turn trimmer on and
run to distribute the oil.
When oil is evenly distributed, turn trimmer off and wipe off
excess oil with a soft dry cloth. Periodically oil heel of blade to
reduce blade friction.
11
10
You can clean the excess hair from your blades by
using a small cleaning brush. Any excess hair and
dirt that has accumulated between the blades should
come out by using the Monster Clippers Clean & Cool
Spray (sold seperately). This maintenance spray cools,
A quick and easy way to clean the blade of impurities!
8096 Manual.indd 108096 Manual.indd 10 16-04-20 15:2616-04-20 15:26

USE MONSTER CLIPPERS OIL ONLY.
Wipe off excess oil to prevent it from running into the motor compartment.
Oil in the motor compartment could eventually lead to poor motor performance
or defects.
UNIT CARE
It’s best to use a clean cloth (dry or dampened with water).
DO NOT USE thinner, bleach, benzene or other aggressive cleaning agents to
clean the unit!
11
10
8096 Manual.indd 118096 Manual.indd 11 16-04-20 15:2616-04-20 15:26

REPLACING OR RE-ADJUSTING
THE BLADES
Please use extreme caution when replacing or re-adjusting the blade, improper
adjustment may result in serious skin irritation or even aggravating cuts.
Switch off the trimmer. Undo both screws on the cutting set by using a
phillips-head type screwdriver. Remove the bottom blade and the top blade.
When assembling both blades should be aligned as follows:
1. Adjust the cutting-length adjustment level to the desired cutting length.
2. Make sure that the top blade does not extend past the bottom blade.
The distance between the front edge of both blades should be between
0,2 mm (zero gap) – 0,5 mm.
3. The bottom blade and the top blade should be parallel to each other.
4. The first tooth of the top blade (from the left) must cover the first tooth
of the bottom blade.
5. The outermost tooth of the top blade (on the right) must touch the
outermost large tooth of the bottom blade (on the right).
6 Once the blade is adjusted to zero gap or your liking, gently tighten the two
screws on each side of the blade. If the blade is not adjusted to satisfaction
after testing, repeat the adjusting process.
13
12
8096 Manual.indd 128096 Manual.indd 12 16-04-20 15:2616-04-20 15:26

WARNING: IF THE TOP BLADE EXTENDS PAST THE BOTTOM
BLADE YOU CAN POTENTIALLY CUT A CLIENT.
THEREFOR CHECK THE COMFORT LEVEL OF A BLADE ON YOUR
FOREARM BEFORE USING ON A FACE OR NECK.
USING ATTACHMENT COMBS
Your trimmer comes with 3 attachment combs.
To use, slide front of attachment comb over the teeth of the blade.
Snap comb down over back of blade.
Cutting length indication:
Attachment comb nr. 0,5 = 1,5 mm
Attachment comb nr. 1 = 4,5 mm
Attachment comb nr. 1,5 = 6 mm
Note: Different blade angles in relation to the skin, thickness and texture
of the hair will vary the cutting length.
13
12
SKELETON OPTION
8096 Manual.indd 138096 Manual.indd 13 16-04-20 15:2616-04-20 15:26

15
14
GUIDELINES FOR LITHIUM-ION BATTERIES
1. This trimmer contains a lithium-ion battery. A lithium-ion battery does not
develop a “memory effect” like other batteries. This means that you can
charge the Monster Trimmer at any time for a full charge, or even use
the trimmer before the battery is fully charged. Like most rechargeable
batteries, lithium-ion batteries perform best when used frequently.
2. When the trimmer won’t be used for a week or more we recommend
that you unplug the charging stand or AC adapter and store the trimmer
in a partially discharged condition. Recharge the battery before use.
3. Optimum use of the battery capacity will be achieved when charging
at a stable temperature. Sudden fluctuations in temperature may result
in a partially charged battery.
4. A battery that is used intensively or older then one year may not have the
same run-time performance as a new battery.
5. New lithium-ion batteries that are unused for a period of time, may not
accept a full charge. This is normal and does not indicate any problems.
After several cycles of trimmer use and recharging the battery will accept
a full charge.
To protect the environment please dispose the battery in a responsible manner,
exhausted batteries/ rechargeable batteries should not be disposed of in
the household waste. Dispose of them in a completely discharged state in
accordance with the local legal regulations. For more details on recycling options
and proper disposal, please contact your local waste officials/facility.
8096 Manual.indd 148096 Manual.indd 14 16-04-20 15:2616-04-20 15:26

TROUBLESHOOTING
If your rechargeable trimmer does not seem to be operating or charging
properly, please check the following:
• Make sure voltage is present at the wall outlet (confirm with an appliance
you know is working).
• Check to make sure adapter cord is plugged firmly into trimmer or charging
stand.
If you still encounter problems with charging your trimmer, return the product
to Monster Clippers or an authorized Monster Clippers dealer for examination
and repair or replacement.
Don’t forget to include the AC adapter/ power cord, charging stand and a note
explaining the problem.
15
14
8096 Manual.indd 158096 Manual.indd 15 16-04-20 15:2616-04-20 15:26

120-240V ~50/60Hz
Made in China - Monster Clippers continuously strives for
product improvement.
Therefor, contents may vary.
Monster Clippers | Katernstraat 33 E 1321 NC Almere | The Netherlands
www.monsterclippers.com
© APRIL 2020
8096 Manual.indd 168096 Manual.indd 16 16-04-20 15:2616-04-20 15:26