Monster BLASTER 2MNSK0928 Guide

BLASTER
Manual and Warranty · Manuel et Garantie · Handbuch und Garantieschein
Manual y Garantía ·
䇈ᯢкֱׂ
䇈ᯢкֱׂ·
ĹdžΌŠզ˲
ĹdžΌŠզ˲Model / Modèle: 2MNSK0928

2
ENGLISH
Table of Contents
Product Overview
Charging the Speaker
Pairing with Bluetooth-enabled Device by NFC
Pairing with Bluetooth-enabled Device by setting
Playing Music with a 3.5mm Audio Line-in Cable (Not Included)
Using with Microphone (Not Included)
Volume / Indoor/Outdoor
Charging Your Device via USB
Precautions
Warranty
P3-4
P5
P6
P7
P8
P9
P10
P11
P12-13
P14
* Please fully charge before use.
* Please key in “0000” if passcode is required when pairing.
* The speaker will automatically turn off after 15 minutes when there are no connections.
* For optimum performance with your iOS device, please ensure that your device is running iOS 4.1 or above.

3
ENGLISH
Mode button
Power on / off / Bluetooth pairing
Volume / Indoor / Outdoor level down button
Volume / Indoor / Outdoor up button
Power LED indicator
Indoor mode LED indicator
Volume mode LED indicator
Outdoor mode LED indicator
Volume / Indoor / Outdoor level LED indicators
Bluetooth LED indicator
1
2
3
4
5
6
7
8
9
10
Product Overview
5
9
6 7 8
1
2
43
10

4
ENGLISH
NFC sensor
Rubber cover
3.5mm audio line-in for music source
3.5mm audio line-in for microphone
Charging port
Charging out port
11
12
13
14
15
16
11
12
13
14
15
16

5
ENGLISH
Charging the Speaker
* Please fully charge your speaker before use.
* To view battery level, turn on the speaker for battery level LED activation.
Lift the rubber cover. Connect the speaker to power source with the included adapter.

6
ENGLISH
Pairing with Bluetooth-enabled Device - By NFC
Turn on the speaker by pressing and holding
the “ ” button until a prompt tone occurs.
Turn on the NFC feature on your device.
Tap your device on the NFC sensor.
You will hear the voice prompt “We are
connected” once successfully paired. You
can start playing music.
NFC
ON
We are
connected.

7
ENGLISH
Pairing with Bluetooth-enabled Device - By Setting
Turn on the speaker by pressing and holding
the “ ” button until a prompt tone occurs.
Turn on the Bluetooth feature on your device.
Press and hold “ ” button until you hear
the voice prompt. “Ready to connect”.
Search and select “Monster Blaster” on your
device.
You will hear the voice prompt “We are
connected” once successfully paired. You
can start playing music.
ON Search...
Ready to connect
We are
connected.

8
ENGLISH
Playing Music with a 3.5mm Audio Line-in Cable (Not Included)
Turn on the speaker by pressing and holding
the “ ” button until a prompt tone occurs.
Connect your device and the speaker with a
3.5mm audio line-in cable.
Start playing music from your device.

9
ENGLISH
Turn on the speaker by pressing and holding
the “ ” button until a prompt tone occurs.
Start using microphone while playing music.
Using a Microphone
Connect the speaker and the microphone
with the microphone's 3.5mm jack.

10
ENGLISH
Volume / Indoor / Outdoor
Press the “ ” button until the corresponding LED
indicator illuminates.
Press the “ ” to increase the Volume.
Press the “ ” to decrease the Volume.
Volume mode
LED indicator
Outdoor mode
LED indicator
Indoor mode
LED indicator