Monster iClarityHD Instruction Manual

°ITYIO"
Listen in High Definition
Big. Clear Stereo Sound From aVersatile.
Palm-sized. Bluetooth Wireless Speaker
and Speakerphone
User Guide and
Warranty Information
•• MCNSTER'
~ t.c.(.
•..t:;.:;:;:;u:
I
~:::: .. ~I
II -. -c-
••••••••
~ .
.........
••••••••
~
.
.......
~ ..: ..
.... ~
... ~
\
o Bluetooth'

What's Included:
• iClarityHD Precision Micro Bluetooth Speaker
• Travel Pouch
• USB Charging Cable

General Specifications
Bluetooth v2.0 includes profiles: A2DP, HFP, HSP
• Advanced Audio Distribution Profile (A2DP) for wireless music streaming
• Hands-free Audio (HFP) and Headset Profiles (HSP) for hands-free
ca II ing cap abiIity
• Range up to 33FT (10M)
1

Features and Benefits
• Bluetooth 2.0 with Monster audio and digital signal processing for clean,
best-in-class wireless stereo sound
•Built-in mic with advanced noise-cancellation enables clear wireless
hands-free
calling and conferencing
•
Two 35 mm full range drivers deliver superb music fidelity
•Monster
Passive Radiator Subwoofer
•
Convenient charging with included mini USB charging cable
• Rechargeable Lithium Ion battery for up to 5 hours of playtime
• Connects to iPod or any device with a 3.5 mm headphone port using
aminijack cable (cable not included)
•Auto-search and auto-reconnect with compatible device
2

£
lndul f)U!f)
JB
4:J
8Sn !U!V\J
4:Jl!MS
J8MOd U!BV\I
SIOJlU0:J awn 10"
uoun 8pU3/J aMsu\f
5u~IIB:J aaJ!-spuBH ~ tJ
..
.......
~--- ... -
:W0d ul
O!pnV wwg'£
uouns
5u~J!ed/JaMOd
8U04doJ:J!V\I

Compatibility
Wireless: Devices with Bluetooth 2.0 or above (See General Specifications
for profiles),
such as iPad, iPhone (2nd Gen and newer with iPhone software
3.1), iPod touch (2nd Gen and newer with iPhone software 3.1) and Bluetooth
equipped Macs
and most Bluetooth equipped smartphones or computers.
Wired: Devices with a standard 3.5 mm headphone output port such as iPod
via 3.5 mm minijack cable (not included).
A. WARNING
1. Do not become distracted by this product while driving.
2. Do not leave the product exposed to aheat source or high temperatures.
3. Do not remove or attempt to remove the non-user-replaceable battery.
When disposing of the product, take it to awaste electronics service.
4. Please remember that a loose object in a moving vehicle could become
adeadly projectile in the event of acollision.
4

LED Indicator
There is an LED light in the middle of the front of iClarityHD Precision Micro
Bluetooth Speaker. Below are what the LED's various displays indicate.
LED Off- Power OFF
BLUE - Power ON
Flashing BLUE/RED- Pairing mode
RED- Low Battery Level
Flashing RED- Battery almost drained
Flashing BLUE-Battery is recharging
Set-up and Pairing via Bluetooth For Music Playback
and Hands-free Calling
NOTE: iClarityHD Precision Micro Bluetooth Speaker can pair with most
5

Bluetooth 2.0 devices. Pairing may vary by device. Consult your Bluetooth
device's
owner's manual for pairing instructions.
Putting iClarityHD Precision Micro Bluetooth Speaker
Into Pairing Mode
ON OFF
«429n'
,
1. Turn the main power switch on the back of iClarityHD
Precision Micro Bluetooth Speaker to the liON" position.
2. Press and hold down the C) button on the right side of
iClarityHD Precision Micro Bluetooth Speaker until the light on the front
starts
blinking red and blue. This indicates that it is in pairing mode.
NOTE: iClarityHD Precision Micro Bluetooth Speaker will stay in pairing
mode for 3 minutes. If you do not complete the next steps before then,
simply turn iClarityHD Precision Micro Bluetooth Speaker main power
switch to OFF and then back to ON, and repeat step 2.
6

Pairing with iPad, iPhone or iPod touch
When paired with Bluetooth equipped iPhone, iPod touch or iPad, iClarityHD
Precision Micro Bluetooth Speaker can be used for music playback.
With iPhone, it can be used as a speakerphone on calls. For iPad, iPhone
and iPod touch, you can also use iClarityHD Precision Micro Bluetooth
Speaker as a speakerphone for an online chat client, like Skype.
1. Put iClarityHD Precision Micro Bluetooth Speaker into pairing mode.
2. On your iPad, iPhone, or iPod touch, touch the Settings icon, then select
IIGeneral." Select the IIBluetooth" option. If it is turned "OFF," slide to liON."
You should see lIiClarityHD" as one of the detected devices.
3. Touch the" iClarityHD" option. A pop up window will appear, with the message:
uiClarityHD" would like to pair with your device. Would you like to allow it to pair?
4. Select "Pair" 7

Your device is now connected to iClarityHD Precision Micro Bluetooth
Speaker. For pairing with non-Apple mobile devices, please consult that
device's owner's manual.
Reconnection in Event of Bluetooth Disconnection
If by any reason your device and iClarityHD Precision Micro Bluetooth
Speaker are disconnected, such as out of connection distance
or powering off, they can be re-connected by:
1. Short pressing the power/pairing button on iClarityHD Precision
Micro Bluetooth Speaker.
2. Select "iClarityHD" from your device for reconnection.
NOTE: After pairing, iClarityHD Precision Micro Bluetooth Speaker will
also "auto-connect" with compatible devices that auto-search and re-connect
with their last connecting device if disconnection should occur.
8