Monster SOLAR X MNSOLX-BLK User manual

SOLAR
INDOOR/OUTDOOR WIRELESS
SOLAR POWERED SPEAKER
USER MANUAL
MODEL: MNSOLX-BLK

SOLARXHIGHLIGHTS
SOLAR
PANEL
360˚
LIGHT
360˚
SOUND
CARRYING
HANDLE
SUB-WOOFER
2
CONNECT 8
SPEAKERS

TABLE OF CONTENTS
Package Contents 4
Controls & Connections 5
LED Indicators 6
Getting Started -Charging The Speaker 7
LED Color Functions 8
9
Bluetooth Connection
10-11
EZ PLAY 2 Wireless Connection
12
Specifications
13-14
Important Safety Instructions
15-16
Help & Troubleshooting
19
20
21
Disputes
FCC Warning statement
RF exposure statement&IC Warning
17-18
Limited Warranty
3

PACKAGE CONTENTS
1. MONSTER SOLARX: Wireless Solar Speaker 2. USB Type-C cable
3.
4.
User Manual
(incl. Limited Warranty Statement)
Quick Start Guide
If any items are missing, contact our customer service team at 1-800-976-0677.
4
(Not To Scale)

CONTROLS & CONNECTIONS
Bluetooth Pairing
Volume DOWN/UP
USB Charging Port
Power Button
5
EZ PLAY 2 Pairing
Color Button

LED INDICATORS
Mode (Transmit) Mode (Receive)
Solid -White indicator
Transmit Mode
Fast Flash
Receive Mode
Searching
Solid -Amber indicator
Receive Mode
Connected
Bluetooth
Fast Flash
Bluetooth
Pairing mode
Solid
Bluetooth
Connected
6

GETTING STARTED - CHARGING THE SPEAKER
1.
2.
3.
4.
5.
When
unplugged,
the speaker
will enter
standby
mode after
15 minutes
of inactivity.
(Not To Scale)
BEFORE FIRST USE:
Charge the unit for 6.5 hours.
Connect the speaker to a
power outlet to start charging.
Battery charging status
Red LED Solid / Solid / The First 3 seconds of Powere On
Battery Red LED slow flash method / (0.5Hz)
Battery work at charging mode.
Battery Red fast flash (4Hz) Battery level is less than 15% capacity.
Red LED Solid is on / Solid / Battery is fully charged.
7
Please connect the USB-type C cable for Power.
Plug the USB-type-c cable with a Plug
( not included) into a wall outlet.
Press the Power button (ON)
Monster SolarX will enter Bluetooth
Pairing mode automatically.
Pair with your Bluetooth device

8
LED COLOR FUNCTION
CHANGING COLORS
Short Press the Color/Indicator button to
cycle through the preset colors: Solid Colors, Breathing
color, Chrome color, Music mode, Red, Green , Blue,
Yellow , Purple, Cyan, White color.
AUTO MODE
Auto Mode will be enable/disabled when light sensor in solar
panel detects change from day to night or night to day.
Day Time (AUTO MODE ON)
day time, unless user input changes light brightness, color, or
enables timer.
Night Time (AUTO MODE ON) : Lights will remain on
durring night time to the white light.
Press and hold 3s to disable the AUTO MODE The light will not auto
Long Press (3 seconds) the Standby key
to enter power o mode
Color/TIMER
NOTE: When light is OFF , press the key to turn light ON.
When green indicator is OFF means auto mode timer is OFF.
When green indicator is ON means auto mode timer is ON.
light up at the night time.

9
1. Set the speaker source to Bluetooth (unpaired).
Blue LED will flash.
2. Make sure the Bluetooth function is enabled on
your device.
3. Place the Bluetooth device and speaker within pairing
distance (~1 meter).
4. Press and hold the Bluetooth button for 3 seconds
to enter pairing mode (BLUE LED will flash fast).
5. Search for Bluetooth connections on your device.
Select “Monster SolarX.”
6. The speaker will confirm connection with an
audible message (BLUE LED will turn solid).
BLUETOOTH CONNECTION
(Not To Scale)
SOLARX
must be in
Bluetooth
Pairing Mode
(Fast Flashing
Blue LED) to
connect to
device

10
SOLARA
must be in
Bluetooth
Blue LED)
to device.
Long press the "Power" key for 2 seconds to power on
Master Speaker (Speaker A), Speaker A works at BT
pairing mode and BT Blue LED fast flashes if nothing has
been paired with, Speaker A auto reconnects to last
connected mobile device if it has been paired with.
Open the Bluetooth section of the device (e.g, mobile
phone), search and connect the Monster SolarX
(Speaker B)
Master
Speaker
(Additional Speakers Sold Separately)
EZ PLAY 2 Wireless Connection Step 1
Press “ ” key once on the Master Speaker (Speaker A),
it enters into EZ Play 2 mode, the White LED lights solid
and the speaker will say “Tone”
Step 3
Step 2
(Speaker A)
(Speaker C)
(Speaker D)