montpellier MDI800 User manual

Fully Integrated Dishwasher
MDI800
Please read these instructions carefully before attempting to install or use this appliance.
We recommend that you keep these instructions in a safe place for future reference.
Installation and Operating Instructions
THE PERFECT BALANCE OF FUNCTION AND STYLE
LAUNDRY - DISHWASHING - COOKING - COOLING

Thank you for choosing this Montpellier Integrated Dishwasher.
Our Integrated Dishwasher has been designed to provide you with the best combination of style, reliability and
performance to give you years of trouble-free use.
You may be familiar with a similar product, but please take time to read these instructions carefully before installing or
using your Integrated Dishwasher to ensure you get the most from your purchase.
We recommend that you keep this manual in a safe place for future reference.
Your Integrated Dishwasher is covered by a comprehensive two year Parts &
Labour Guarantee. In the unlikely event that you experience a problem with your
Integrated Dishwasher, you can rest assured that you are fully protected against
the cost of repairs for the rst 24 months . Please note that any claim must be
accompanied by the model reference number, serial number and proof of purchase.
To activate your guarantee, you will need your product serial number. This can be
found on the rear of the machine.
There are two ways to register your Guarantee:
•Online: Visit the Support page on our website and complete the online Product
Registration form. www.montpellier-appliances.com
•By Post: Simply detach and ll in the form provided, attach a stamp and send
it in the post. Don’t forget to include your e-mail address so that we can send
conrmation through to you.
Welcome
Note: We are unable to take registrations over the phone.
ACROSS ALL OUR MODELS
YEAR
GUARANTEE
PA R T S & L A B O U R
www.montpellier-appliances.com

1. Upper basket with racks
2. Upper spray arm
3. Lower basket
4. Lower spray arm
5. Filters
6. Rating plate
7. Control Panel
8. Detergent and rinse-aid dispenser
9. Salt dispenser
10. Upper basket track latch
11. Upper Cutlery Basket
12. Ceiling Spray Arm: It provides a better wash
for the dishes in the upper basket.
13. Turbo Drying Unit: This system provides a
better drying performance for the dishes.
1
8
7
6
5
4
3
2
9
11
10

5
CONTENTS:
Section 1. Installation
Section 2. Safety Advice
Section 3. Operating the Appliance
Section 4. Maintenance

6
Section 1. Installation
.
Position the appliance in a dry, well ventilated room with a solid level floor.
The room temperature must not fall below +5° or rise above +35°.
.
This appliance is fitted with adjustable feet so that you can ensure it is sitting
level. Adjust the feet by turning left or right until the appliance is level.
. The adjustable feet must never be removed.
. Plug the 3pin moulded plug into a nearby 13amp plug socket. Always make
sure that you can easily gain access to switch the power on or off at the plug
socket.
. N.B - This appliance must be earthed!
.
If you have installed this appliance underneath a work surface the plug
socket should have a fused switch located above the work surface so that
you can easily switch the appliance on or off.
.
You are advised to turn the power off at the plug socket when you have
finished using your appliance.
. Before using the appliance for the first time, you must set the water softener,
add salt, add rinse aid and add detergent.
.
Your plumber will connect the water hose (supplied) to the water inlet
connection at the rear of the appliance and to an adjacent cold water supply.
It is your responsibility to ensure that the supplied washers have been used
and that both connections are water tight.
.
Ensure water pressure is within the range specified on the Rating Label.
Your plumber will connect the water drain pipe to an adjacent sink (see Pic.1
below)
.
Ensure that the water hose and water drain pipe are not kinked when the
appliance is pushed into place. If either of these pipes is kinked the appliance
will not operate correctly.
.
Ensure that the appliance is not standing on the power cable or hoses.
.
Do not use the water inlet hose of your old machine. Use the new water inlet
hose and connect the hose directly to the water inlet tap. The pressure
supplied by the tap should be a minimum of 0.03 Mpa and at a maximum of 1
Mpa. If the water pressure is above 1 Mpa, a pressure relief valve should be
fitted.
After the connections are made, the tap should be turned on fully and checked
that it is water tight. You should always turn off the water inlet tap after a wash
programme is finished.
Note: An Aquastop water hose is used in some models. In such
circumstances, heavy tension will exist. Do not cut the Aquastop water hose
and do not let it get folded or twisted.

7
Water Outlet Hose
The water drain hose can be connected either directly to the water
drain hole or to the sink outlet spigot using a special bent pipe (if
available). The hose connection should be at a minimum of 50cm and
at a maximum of 110 cm from the floor.
Please note that a drain hose longer than 4m must not be used as it
may prevent the appliance from washing correctly.

8
Section 2. Safety Advice
.
This appliance is manufactured and intended for DOMESTIC use only. Any
guarantee offered with the appliance is not valid for any installation in a
commercial environment.
.
This appliance MUST BE EARTHED!
. Never try and disconnect the power by pulling the supply cable – hold the plug
firmly and pull it out of the socket.
.
Never touch the plug or power cable with wet hands.
.
Check the power cable periodically for signs of damage and ensure that it is
not trapped underneath the appliance. If the cable is damaged, turn off the
power at the socket and arrange for a qualified electrician to replace the
cable.
. Never remove the power cable, open the appliance cabinet or try to modify
the appliance in any way. All service work must be carried out by a qualified
electrician.
. The appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
. Ensure that the appliance is sited well away from other heat sources, i.e. open
fires, boilers etc... and in a dry, well ventilated room. The temperature must not
fall below +5° or rise above +35°.
.
Do not sit on the appliance or stand on the open door – the appliance could
tip forwards.
.
Keep children away from detergent and rinse aid, keep children away from the
open door of the dishwasher, there could still be some detergent left inside.
.
This appliance is not a toy – ensure that children are supervised at all times
whilst in the vicinity of this appliance.
.
Take care when loading the baskets with knives and cutlery. Always ensure
that sharp points are pointing away from you or down into the basket.
. Only wash crockery and utensils that are clearly marked ‘dishwasher safe’.
. Do not wash plastic items unless they are clearly marked ‘dishwasher safe’.
. Only use dishwasher detergents and rinse aid clearly marked for use with
automatic dishwashers.
.
Never use non dishwasher detergent in this appliance, i.e. hand soap,
washing machine detergent, washing up liquid etc.
. Always add dishwasher salt to your dishwasher, even when using 3-in-1
tablets. This will help protect your appliance against limescale.
.
If the power supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.

Section
3.
Operating
the
Appliance
3.1.
Before
Operating
t
he
Appliance
3.1.1.
Adding
Salt
·
·
·
·
·
·
3.1.2.
Adding
Rinse
Aid
9
The sole use of 3-in-1 tablets is not recommended as failure to add
salt to the salt container will leave your dishwasher exposed to
limescale damage which is not covered by the manufacturers
guarantee. Protect your appliance by adding salt as follows:
Remove the lower basket and then unscrew the salt container cap (1).
Add water and approximately 1kg of specialist dishwasher salt to the
container until almost overflowing. N.B. It is normal for a small amount
of water to come out of the container whilst filling it with salt.
Note: Fill the salt compartment with water at first use only.
Now replace the screw cap correctly and ensure that it is tight. If not,
salt may leak into the dishwasher chamber which can be detrimental to
the stainless steel interior. This is not covered by the manufacturers
guarantee.
After adding salt you should run a programme immediately to activate
the water softener and flush away any salt spilled into the machine.
If salt is low the indicator light will show on the control panel.

10
.
Remove the Rinse Aid Filler Cap (1).
.
Add Rinse Aid until the rinse aid level indicator becomes dark (2).
.
Replace the Filler Cap (3).
.
If the rinse aid level is sufficient the indicator light will be dark on the control panel
(2B). If more rinse aid is required the indicator will be light (2A) .
3.1.3. Adding Detergent
Use specialist dishwasher detergent powder or dishwasher tablets in
this appliance. However, please note that tablets do not
always dissolve fully during shorter wash programmes, so you are advised to
operate your appliance on a longer wash programme if using tablets.
In addition, the use of tablets may result in spots appearing on dishes
and glasses.
Push the latch to open the detergent container as shown in image 1. The
detergent pod has level lines inside to help measure the amount of
detergent you use. The pod can take a total of 40cm³ of detergent. If your
dishes are heavily soiled pour 25cm³ of detergent into the larger
compartment (b), if they are less soiled use only 15cm³.
If the programme selected has a pre-wash cycle you can add 5cm³ of
detergent to the pre-wash compartment (a).
If using combined detergents, make sure to check the specifications on
the product to ensure that it is appropriate for the wash programme, your
machine, and the level of hardness of the mains water.

11
3.1.4. Combined Detergent – Recommended Usage
If you are using a combined detergent, add a rinse aid agent to your machine
and switch the rinse agent setting to its lowest position (1) and activate the
tablet detergent button in order to obtain better results. Depending on the
water hardness you may need to fill the salt container with salt.
We do not recommended using 3 in 1 tablets on fast or rapid programmes as
the tablet may not fully dissolve. For these programs we suggest using
normal
dishwasher powder.
3.1.5. Adjusting the Water Softener
1 2
3
After resetting your machine, press the program selection button and keep it pressed
down. 3
Meanwhile, energise the machine by pressing the Power On/Off button. 1
Keep the program selection button pressed until “SL” disappears from the
display. 3
Release the program selection button after “SL” disappears from the display. 3
Your machine displays the latest entered water hardness setting.
Water hardness can be adjusted by the programme selection button . 3
according to Table of Water Hardness Level Settings.
After adjusting the water hardness level , press on/off button to save settings in
memory. 1
Water
hardness
level
British
hardness
dE
Hardness Level Indicator
1 0-6 L1 is seen on display.
2 7-14 L2 is seen on display.
3 15-21 L3 is seen on display.
4 22-28 L4 is seen on display.
5 29-39 L5 is seen on display.
6 40-63 L6 is seen on display.