montpellier CT780 User manual

Installation and Operating Instructions
MODEL: CT780
Built-In 4 Zone Ceramic Hob
Please read these instructions carefully before attempting to install or use this appliance.
It is advisable to keep these instructions in a safe place for future reference.
(Picture shown for indicative purposes only )

2
In
t
roduc
t
ion
Thank you for choosing this montpellier branded appliance. It
has been designed to give years of trouble-free use provided
it is installed and maintained correctly.
Please read these instructions carefully before installing or
using your appliance. It is advisable to keep your purchase and
installation receipts with these instructions in a safe place for future
reference. Included is some important safety information
in addition to guidelines and recommendations that will enable you
to take full advantage of all the functions available.
T
his
quali
t
y
applian
c
e
has
been
t
e
st
ed
and
c
e
r
t
i
f
ied
t
o
m
e
e
t
all
applicable UK electrical and safety standards.
This appliance must be installed and connected in
accordance with current regulations.
After unpacking the appliance ensure that there is no visible
damage. If the appliance has been damaged during transit,
do not use it, contact your retailer immediately.

3
Your 2 year Manufacturer's guarantee
THIS DOES NOT AFFECT YOUR STATUTORY RIGHTS.
Your new montpellier appliance carries a free guarantee which protects you against the cost of
repairs during the first 24 months from date of purchase provided that:
Any claim is accompanied by evidence of the model reference, model serial number and proof of
purchase, such as a Sales Receipt, showing that the appliance was purchased within the 24
months prior to the date of claim.
What is not covered under the Guarantee:
·Any appliance not correctly installed and operated in accordance with the
manufacturer's instructions.
·Any appliance that is used for anything other than domestic purposes.
·Any defect caused by accident, misuse, unauthorized modification or inexpert repair.
·Cost of Call-out where a fault cannot be found with the appliance.
·Cost of Call-out for work covering routine maintenance, such as, but not exclusively,
cleaning of filters or defrosting.
·Cost of Call-out for work required to correct the alignment of doors following door
reversal procedures carried out by you.
·Use of the appliance by anyone other than the Householder.
·Use in any commercial environment.
·Consumable items, such as, but not exclusively, fuses in plugs, bulbs and breakable
items which require routine replacement.
·Repair costs incurred that have not been authorised by Repairtech and/or carried
out by a non-approved Repairtech engineer.
YOUR GUARANTEE IS VALID ONLY IN THE UK.
To Register your Appliance simply complete the card in your appliance pack and return it with a
stamp affixed or Alternatively you can Register online at www.repairtechuk.com
SERVICE HELP-LINE
Should your appliance develop a fault, please call the
Repairtech Service Helpline on:
01527-888133
Please remember to have all your product details available, including the model number,
serial number, date of purchase and your retailers’details before registering a fault.
Your service call cannot progress without this information.

4
Description of the Appliance
(Picture shown is for indicative purposes only)

5
CONTENTS:
Section 1. Safety Advice
Section 2. Installation
Section 3. Operating the Appliance
Section 4. Maintenance

6
Section 1. Safety Advice
-Please read this booklet thoroughly before installing and switching on the
appliance. The manufacturer accepts no responsibility for incorrect
installation and usage.
-This appliance is guaranteed for Domestic Use Only.
-The appliance is not intended for use by persons (including children of
age 8 and above) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given
supervision or instruction concerning the use of the appliance by a
person responsible for their safety. Children should be supervised to
ensure that they do not play with the appliance.
-This appliance must only be used for cooking/heating foods and liquids.
Do not use it for any other purpose.
-If using an adaptor, this must be used in accordance with the
manufacturers instructions and ensure that the electrical circuit is not
overloaded as this could cause overheating.
-Do not twist or bend the cables, and keep them away from hot surfaces.
-Following installation make sure that the power cable is not trapped
underneath the appliance.
-Keep the appliance surfaces clean. Failure to do this could lead to the
appliance malfunctioning.
-The surface of this appliance will get hot during use. The surface of this
appliance will remain hot after it has been turned off. Do not touch or
clean the heating zone until it has completely cooled down.
-If the power supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to
avoid a hazard.
-WARNING: The appliance and its accessible parts become hot during
use. Care should be taken to avoid touching heating elements. Children
less than 8 years of age shall be kept away unless continuously
supervised.
-WARNING: Unattended cooking on a hob with fat or oil can be
dangerous and may result in fire. NEVER try to extinguish a fire with
water, but switch off the appliance and then cover flame e.g. with a lid or
a fire blanket.
-WARNING: Danger of fire: do not store items on the cooking surfaces.
-WARNING: If the surface is cracked, switch off the appliance to avoid the
possibility of electric shock.
-The appliance is not intended to be operated by means of an external
timer or separate remote-control system.
-Do not use harsh abrasive cleaners or sharp metal scrapers to clean the
oven door glass and other surface since they can scratch the surface,
which may result in shattering of the glass or damage to the surface.
-Do not use steam cleaners when cleaning the appliance.

7
Section 2. Installation
-Remove all packaging, protective film and securing tape from the appliance.
-Position the appliance in a dry atmosphere.
- The following dimensions are provided as a guide for installation –your installer will
carry out the installation in accordance with the current regulations.
- Your installer will connect the power cable in accordance with the current regulations.
To install this appliance, please proceed as follows:
2.1 Work-Surface Cut-Out & Position Near Walls
2.2 Securing the Hob
Apply the self-adhesive sealing tape all the way around the lower edge of the cooking
surface as seen in the below diagram.
Now position the hob into the work surface cut-out to secure it into place.
Adjoining Walls
A(mm)
B(mm)
Combustible 60 150
Non-combustible 25 40

8
WARNING: The temperature of the bottom surface of the hob may
rise during operation. Therefore, a board must be installed
underneath the product.
2.3 Electrical Connection
This appliance must be ‘hard wired’to a suitable fused point adjacent to the
appliance housing and protected with a 32 amp fuse. Please note that a switchable
spur should be accessible above the work surface to allow the power to be turned off.
Note: This hob cannot be connected via a 3pin plug!
Your installer will connect this appliance in accordance with current regulations.
Electrical connection diagram:

9
Section 3. Operating the Appliance
3.1. Control Panel
3.2. Timer, Power and Cooking Functions
Switching the appliance on:
Switch the hob on by touching the ON/OFF key . All zones show a static “0”and the
bottom right dot will blink. If no cooking zone is selected within 10 seconds, the hob
will automatically turn off. If no heat level between 1-9 is selected within 3 seconds of
activating a heat zone the selection is erased.
Switching the appliance off:
Switch the appliance off at any time by touching .
Switching the cooking zones on:
Touch the heat zone selection key corresponding to the zone you wish to cook on.
There is a static dot indication of the selected heat zone display and a blinking dot on
all other displays.
Select the temperature setting by using the increase setting key or decrease
setting key . The element is now ready to cook.

10
Switching the cooking zones off:
A cooking zone can be turned off in 3 different ways:
·Simultaneous operation of the and keys.
·Reducing the heat setting to “0”by operating key.
·Use of the timer turn off function for the corresponding heat zone.
If the cooking zone is hot, “H”will be displayed instead of “0”.
Timer/Minute Minder Function
The timer function provides the following features:
The ability to run a maximum of 4 heat zone assigned timers and 1 minute minder
(which has no assigned heat zone) simultaneously.
A heat zone timer can only be assigned to an active heat zone, running between heat
setting 1-9. The minute minder is independent of any heat zone.
In order to use both functions, the timer function must be activated by the
Active/Inactive Timer Button .
Touching for the first time after activating the heat zones will activate the minute
minder (no cooking zone indicator will be flashing). “00”will show and you can set a
time for the minute minder function by pressing the timer increase or decrease
buttons. Once set, the minute minder will not be stopped by switching off the
appliance or activating the key lock. Once the minute minder timer is up the buzzer
will sound. This can be stopped by touching any button.
Touching again will activate the timer function and will be assigned to one of the
active heat zones, indicated by a flashing cooking zone indicator. Touching again
will allow you to toggle through the active heat zones in a clockwise direction. The
cooking timer can be set by pressing the timer increase or decrease buttons.
Touching will allow you to set cook timers for additional heat zones if required.
The timer display will show the timer that will run out next and the assignment of that
timer will be displayed by a flashing cooking zone indicator. The amount of timers
running can be identified by the number of cooking zone indicators that are statically
on.
You are able to toggle through the different timer/minute minder values by pressing
.
All heat zone timers can be erased by switching off the appliance. Although please
note that the minute minder timer will not be erased.

11
If you wish to erase a heat zone timer you can either decrease the timer to “00”by
pressing the timer decrease button or touch both the timer decrease and timer
increase button simultaneously while the heat zone timer you wish to erase is
selected.
After reaching “00”of a heat zone timer, the assigned heater will be set to “0”.
This will be indicated by a buzzer tone which can be stopped by touching any button.
Dual/Oval Zone Function:
The dual/oval zone function can be activated by selecting the Dual Zone Selector key
as long as a zone capable of that function is selected. The extension zone can only
be activated after a heat level of 1-9 is selected.
Heat Boost Function:
All heat zones are equipped with a heat boost function.
If the heat boost function is active then the heat zone will operate with maximum
power for the period of the heat boost time. This is indicated through a flashing “A”,
alternating with the heat setting value on the heat zone display. Once the heat boost
time has ended only the heat setting will be shown.
If the heat boost is to be used for a heat zone, heat level 9 must be selected by
pressing starting from level 0. After this “A”should alternately be displayed. The
heat boost can be turned off by pressing until heat setting “0”appears. The heat
boost can be activated again by pressing if the heat setting is set to 9. The display
will flash “A/9”.
Sensor Safety Cut Off:
To prevent the appliance from unwanted, random sensor operation, a sensor monitor
is included. In case one or more buttons are held for longer than 12 seconds, the
appliance will make a sound and switch off. The safety turn off causes the display to
flash “F”on all heat zones displays. If residual heat is present, “H”will be displayed
appropriately.
Over Temperature Switch Off:
As the control panel is located fairly near a heat zone it is possible for an incorrectly
placed pan to heat up the glass of the control panel and cause damage. If this area
gets too hot it will switch off automatically and be indicated on the heat zone display
with the letter “t”until the temperature decreases.

12
Key Lock:
While the Key Lock function is active it is only possible to switch the appliance off. If
the key lock button is pressed and held for two seconds the lock will be activated
and acknowledged by a buzzer. After this two second period the key lock indicator
will flash and the heat zone will be locked.
Child Lock:
The child lock function is only available when the hob is in stand-by mode (when no
heat zones are active).
To activate the child lock should be pressed until the buzzer sounds, then and
must be pressed simultaneously for at least 0.5 seconds but max 1 second,
followed by pressing the button.
When activated the above will be shown, to deactivate the child lock and must
be pressed simultaneously for at least 0.5 seconds followed by pressing the
button.
If removed correctly the L symbols should disappear.
Residual Heat
When the hob is turned off after cooking, there may be residual heat stored in the
vitro-ceramic glass. If this is the case the display panel will display flashing “H”
symbols over the corresponding heat zones until the temperature has cooled down to
a safe level.
Operating Time Limitations
If a heat setting for a heat zone has not been changed for a prolonged period of time,
the heat zone will automatically turn off. The operating time limitations will differ
according to the selected heat setting.

13
Section 4. Maintenance
Before any maintenance or cleaning work is carried out, DISCONNECT the
appliance from the ELECTRICITY supply and ensure that the appliance is
completely cool.
4.1. Cleaning the Hob Surface
Clean spillages from the hob surface as soon as possible after use. Always ensure
that the surface has cooled down before cleaning.
Use a soft cloth or kitchen paper to clean the surface. If the spillage has dried on the
surface you may need to use a specialist vitro-ceramic glass cleaner, available from
all good supermarkets.
Do not use other abrasive cleaners and/or wire wool etc as this may scratch the
surface of the hob.
4.2. What to do if something goes wrong
There is no power to the appliance:
-Check there is not a power cut
-Check there is power to the electric socket/appliance
After cooking the letter ‘H’is displayed:
-This is the hot surface indicator –it will remain on until the appropriate heat zone has
cooled to a temperature of 60C.
After switching off, the appliance sounds like it is still running:
- This is the cooling fan –it will remain on until the appliance has cooled down to a
level which is not potentially harmful.

14
If after the previous checks there is still a fault, ple
ase
contact the Repairtech Service Helpline below. Please
ensure that you have the model number, serial number,
date of purchase and retailers information available
before you make the call.
Should your appliance develop a fault, please call the
Repairtech Service Helpline on:
01527-888133

15
Important Note:
This appliance is marked according to the European directive
2002/96/EC on Waste Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate
waste handling of this product.
The
symbol on the product, or on the documents accompanying the
product, the Crossed Out Wheelie Bin, indicates that this appliance
may not be treated as household waste. Instead it shall be handed
over to the applicable collection point for the recycling of electrical
and electronic equipment.
Disposal
must be carried out in accordance with local
environmental regulations for waste disposal. For more detailed
information about treatment, recovery and recycling of this product,
please contact your local authority, your household waste disposal
service or the retailer where you purchased the product.
We continuously try to improve our products for the benefit of our customers.
For this reason we reserve the right to make changes to any product at any
time, without notice
Issue: 03/16-03-2015