Moog Werkstatt-01 User manual

Exploration Patchbook

GATE IN
LIFTOFF BASS
MATCH ALL KNOBS, SWITCHES, AND PATCH LOCATIONS TO THE GRAPHIC BELOW
NOTES:
Use the VCO FREQ knob to tune the keyboard down low to play in a bass register.
Lower the VCF RES knob for a more buzzy timbre.
1

GATE IN
WEST COAST LEAD
MATCH ALL KNOBS, SWITCHES, AND PATCH LOCATIONS TO THE GRAPHIC BELOW
NOTES:
Use the VCO FREQ knob to tune the keyboard higher to play in a lead register.
2

GATE IN
ANALOG HIHAT
MATCH ALL KNOBS, SWITCHES, AND PATCH LOCATIONS TO THE GRAPHIC BELOW
NOTES:
The VCF is the sound source in this patch.
Adjust the ENVELOPE DECAY knob to go from closed to open hi-hat.
Adjust the relationship between LFO RATE and VCF CUTOFF knobs to alter the timbre of your hi-hat.
Turn the VCF MOD AMOUNT all the way down to turn your hi-hat into a clave. 3

GATE IN
ACID SQUARE
MATCH ALL KNOBS, SWITCHES, AND PATCH LOCATIONS TO THE GRAPHIC BELOW
NOTES:
Use the VCO FREQ knob to tune the keyboard down low to play in a bass register.
4

GATE IN
DISCO TOM
MATCH ALL KNOBS, SWITCHES, AND PATCH LOCATIONS TO THE GRAPHIC BELOW
NOTES:
The VCF is the sound source in this patch, so the VCF CUTOFF knob should be used for tuning.
5

GATE IN
DEEP KICK
MATCH ALL KNOBS, SWITCHES, AND PATCH LOCATIONS TO THE GRAPHIC BELOW
NOTES:
Use the VCO FREQ knob to tune the keyboard down low to play in a bass register.
6

GATE IN
FAUX FOLDER
MATCH ALL KNOBS, SWITCHES, AND PATCH LOCATIONS TO THE GRAPHIC BELOW
NOTES:
Adjust the VCF MOD AMOUNT knob to increase the level of “folding.”
Turn up the VCO MOD AMOUNT knob to add vibrato.
7

WERKSTATT SYNTH
P/N BRD-10-011-1111 REVA - 02/24/14 SD
©Moog Music Inc 2014
GATE IN
LASER ZAP
MATCH ALL KNOBS, SWITCHES, AND PATCH LOCATIONS TO THE GRAPHIC BELOW
NOTES:
Adjust the ENVELOPE DECAY knob to go from laser pistol to laser cannon!
8

GATE IN
PICK UP THE PHONE
MATCH ALL KNOBS, SWITCHES, AND PATCH LOCATIONS TO THE GRAPHIC BELOW
NOTES:
Adjust VCO MOD AMOUNT to control the depth of “ringing.”
9

GATE IN
UNSTEADY BASS
MATCH ALL KNOBS, SWITCHES, AND PATCH LOCATIONS TO THE GRAPHIC BELOW
NOTES:
Use the VCO FREQ knob to tune the keyboard down low to play in a bass register.
Try turning up the VCF MOD AMOUNT for a more dramatic wobble.
10

VIBRATO LEAD
MATCH ALL KNOBS, SWITCHES, AND PATCH LOCATIONS TO THE GRAPHIC BELOW
NOTES:
Use the VCO FREQ knob to tune the keyboard higher to play in a lead register.
Adjust VCO MOD AMOUNT knob to taste for vibrato depth.
GATE IN
11

GATE IN
NOTES:
Adjust the VCO MOD AMOUNT and VCF MOD AMOUNT to alter the timbre of distortion.
WHO NEEDS A DISTORTION PEDAL ANYWAYS?
MATCH ALL KNOBS, SWITCHES, AND PATCH LOCATIONS TO THE GRAPHIC BELOW
12

Your Werkstatt-01 is an instrument of exploration
and can be expanded to satisfy your wildest
creative visions. To discover more ways to get the
most out of your Werkstatt-01 visit:
MOOGMUSIC.COM/WERKSTATT