Moon Valley M-1300 User manual

M-1300 46” Round Table Set Assembly Instructions
NOTE: Please check contents and read directions carefully before assembly. If any items are
missing or damaged, do not take the product back to the store. Call Moon Valley customer
service at 866.332.1616 and we will correct the problem as promptly and as efficiently as
possible. Also, checking or cracking of the logs is a natural part of the drying aspect of cedar.
This does not affect the structural integrity of the wood. This natural occurrence enhances the
rustic beauty of the product.
46” Round Table Set Components
(1) Table
(4) Table Legs
(4) 11” Leg Braces
(4) 9” Leg Braces
(1) Pre-Assembled Table Top
(16) 2 ½” Lag Bolts
(4) 2 ½” Screws
(4) Leveling Glides
(4) Benches
(4) Pre-Assembled Bench Tops
(16) Bench Legs
(8) 8 ½” Leg Braces
(8) 18” Seat Braces
(8) 2 ½” Lag Bolts
(8) 3 3/8” Lag Bolts
(16) 2” Screws
(16) 2 ½” Screws
Tools Required: Rubber Mallet or Hammer, Electric Drill or Screwdriver w/ Square-Head Bit,
½” Socket & Socket Wrench
Table
1. Insert table legs into pre-drilled holes in table top underlay.
Use rubber mallet to tap any doweled ends into place. If using
a hammer, be sure to pad impact area to avoid damaging the
product.

2. Use 2 ½” lag bolts to secure 11” leg braces to the table legs,
as well as to bottom of table (as shown in these two photos).
3. Use 2 ½” lag bolts to secure the 9” leg braces to the table
legs and to the table underlay (as shown in these two photos).
4. Use 2 ½” screws to secure the doweled end of the table legs
to the table underlay.
5. Use rubber mallet or hammer to tap leveling glides into
bottom of each table leg.

Benches
6. Insert 8 ½” leg braces into pre-drilled holes on bench legs to
join legs and create leg assembly. Use mallet to tap them into
place. Note: Newer table models will utilize 8 ½” braces
which recess into holes on table legs.
7. Tap all bench leg assemblies into the pre-drilled holes on the
bottom of the bench.
8. Install 18” seat brace (as shown in next two photos). Center
the angled brace ends in middle of the bench. Place the other
end of the brace underneath the 8 ½” leg brace. Insert the 2
½” lag bolts to secure the seat braces to the seat bottom.
Next, run the ¼” drill bit through the 8 ½” leg brace and into
the seat brace.
9. Use 3 3/8” lag bolt to secure the seat brace to the leg brace,
as shown in this photo series.

10. Use 2 ½” screws to secure the doweled end of each bench
leg to the seat underlay.
11. Use 2” screws to secure the 8 ½” leg braces to the bench legs,
as identified by arrows in photo.
Thank you for your Moon Valley purchase and we hope that you enjoy your 46” Round
Table Set. To view other Moon Valley products, please visit us at
www.moonvalleyrustic.com.
Moon Valley Rustic Furniture P.O. Box 929, Clarkston, MI 48347 Phone: [phone] Fax: [phone]
www.moonvalleyrustic.com
March 2010. Do not let children play with plastic bag.