Mooni Remote Shutter User manual

INSTRUCTIONS
Bluetooth
®
Remote Shutter
OFFICIAL BLUETOOTH
®
PRODUCT

THANK YOU
Thank you for purchasing our product.
Mooni® has been specifically designed to make
taking selfies much easier. Never again will you
have to struggle to hold your cell phone at arm’s
length and press the camera shutter whilst
struggling to keep your phone still.
Just Bluetooth®pair your Mooni® with your
compatible iOS 5.0+ or Android 4.3+ cell phone,
hold your phone in one hand, pose for your selfie
and press the button on your Mooni® with the
other. Simple!
Mooni® is manufactured with fully certified
Bluetooth® 3.0 technology which guarantees you
instant pairing as well as reliable and secure
connections every time.

Settings
Bluetooth
DEVICES
Bluetooth
ACTIVATE BLUETOOTH®ON YOUR DEVICE
Prepare your Mooni® for pairing by activating the
Bluetooth® function on your compatible cell phone
or other device.

PAIRING MODE
Red and blue LEDs flash alternately.
SWITCH ON
Press and hold until
Red light appears.
SWITCH ON MOONI®& ACTIVATE BLUETOOTH®
PAIRING MODE
The button in the center of your Mooni®functions
both as an ON/OFF switch and a shutter release.
To switch on, hold down until the red LED light
appears. Wait a few seconds until the LED flashes
red and blue alternately. Mooni® is now in “pairing
mode”.

Settings
Bluetooth
Mooni Connected
MY DEVICES
Bluetooth
Red LED flashes intermittently
PAIRING SUCCESSFUL
CONNECT & PAIR
Mooni® will now appear in the Bluetooth® device
list. Connect it with your cell phone in accordance
your model’s pairing instructions. Normally, this
requires you to simply click on the device name.
When successfully paired, the LED light will flash
red intermittently every 3 seconds.

Note that screenshots and settings may vary according to
make, model and Android version of cell phone.
IMPORTANT NOTE FOR ANDROID USERS
Please follow the steps below to ensure your
'Volume Key' is set to 'Camera Key'. This ensures
Mooni® operates your camera shutter and not the
zoom function.
• Open Camera app & click ‘gear’ for settings
• Click option 'Volume Key'
• Click 'The Camera Key'
GPS tag
Volume key
Timer
White balance
The camera
key
O
Volume key
The zoom key
The camera key
The record key

OPEN CAMERA APPLICATION & TAKE SELFIE
Open your cell phone’s camera application, pose
for your selfie by holding your cell phone in your
preferred hand. Hold Mooni®in the other and
press the center button to remotely activate the
camera shutter.

Settings
Bluetooth
Bluetooth
SWITCHING OFF
Press and hold for
3 Seconds.
SWITCHING OFF & RE-PAIRING
Mooni® will automatically switch itself off when
you deactivate the Bluetooth® function on your cell
phone or device. Alternatively, hold down the
center button for 3 seconds. The LED will flash
quickly for a second before switching off.
Mooni® will automatically re-pair with your
Bluetooth® device assuming its Bluetooth®
function is already activated and Mooni®is
switched on. You do not need to enter your
Bluetooth®settings again.

FIX YOUR MOONI®TO YOUR KEYRING
Mooni® has been designed with maximum
convenience and portability in mind.
Simply carry it on your keyring for the perfect selfie
opportunity anytime.

REPLACING THE BATTERY
Mooni® comes fitted with a long-life CR2032
lithium-ion battery as well as a spare for your
convenience. To replace, hold Mooni® with rear
facing you and gently rotate the cover
counter-clockwise (anti-clockwise). The cover will
loosen, in turn exposing the battery. Remove it and
replace with the new battery. Replace cover and
rotate clockwise to tighten.