MOOSE G218 User manual

USER’S MANUAL
MAN210_0
www.moosesound.com
Passive subwoofer
BASS SERIES
G218
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL MADE IN
PORTUGAL
100%
EUROPEAN

Dear customer,
Thank for choosing MOOSE branded products!
MOOSE is a brand of professional audio & lighting products, proudly developed and manufactured in
PORTUGAL.
In order to operate this product in a safe and reliable manner, please follow the instructions in this booklet and
before operating the equipment read the instructions carefully and please note the technical information.
Our products undergo very rigorous testing under strict conditions and they are monitored continuosly during the
manufacturing process. In order to guarantee the product function and safety, the original parts of the
manufacturer's design must be used. If any parts other than those of the manufacturer are used, or the product is
modified in any way, the user forfeits all warranty rights to claim.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
To prevent electrical shock do not remove
the cover. No user serviceable parts inside.
Refer service to qualified personnel only.
Introduction
www.moosesound.com 2
Caution
The lightning flash with arrowhead symbol within an equilateral triangle is intended
to alert the user to the presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude to constitute a risk of
electrical shock.
The exclamation mark within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance instructions.
The amplifier is marked with this instruction so please
proceed accordingly in order to avoid any hazard.
1. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match
the values specified on the equipment.
2. If the power cord of the device is equipped with an earthing contact, then it must be connected to an outlet
with a protective ground. Never deactivate the protective ground of a power cord.
3. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before
extended periods of disuse.
4. Replace fuses only with fuses of the same type and rating. If a fuse blows repeatedly, please contact an
authorised service company.
5. Do not open or modify this equipment.
6. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping
hazards.
7. Do not turn on the Amplifier ON before checking that all volumes to zero .
IMPORTANT: Never remove the cover, because otherwise there may be a risk of electric shock. There are no user
serviceable parts inside. Have repairs carried out only by qualified service personnel.
Passive subwoofer
G218
MAN210_0

www.moosesound.com 3
Manufacturers Declaration
PROPER DISPOSAL OF THIS PRODUCT
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not
be treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled
waste disposal. Please dispose of this product separately from other waste and have it recycled to promote
sustainable economic activity.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details on where and how they can recycle this item in an environmentally friendly manner.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal .
ENVIRONMENTAL PROTECTION AND ENERGY CONSERVATION
Energy conservation is an active contribution to environmental protection. Please turn off all unneeded electrical
devices. To prevent unneeded devices from consuming power in standby mode, disconnect the mains plug.
EC DECLARATION OF CONFORMITY
The equipment marketed by MOOSE complies (where applicable) with the essential requirements and other
relevant specifications of Directives 1999/5/EC (R&TTE), 2004/108/EC (EMC) und 2006/95/EC (LVD). Additional
information can be requested to [e-mail].
PROUDLY DEVELOPED AND MANUFACTURED IN PORTUGAL
PROFACTOR S.A., all rights reserved. The technical data and the functional product characteristics can be subject
to modifications. The photocopying, the translation, and all other forms of copying of fragments or of the integrlity
of this user's manual is prohibited.
MAN210_0
Passive subwoofer
G218

www.moosesound.com 4
Connections and Controls
Please refer to the following scheme and instructions:
1. INPUT: Speakon NL4 compatible input.
2. THRU: Speakon NL4 compatible output (parallel wired with Speakon compatible input 1+/1-).
12
Technical specifications
G218 Backpanel
MODEL G218
TYPE Passive subwoofer
ENCLOSURE DESIGN Bass reflex
POWER OUTPUT (RMS) 2000W (AES)
2800W (Program)
140000W (Peak)
FREQUENCY RANGE 38Hz - 180Hz
NOMINAL IMPEDANCE 4Ohm
TRANSDUCER TYPE* 2x 18" (4in) LF European transducer
CROSSOVER FREQUENCY N/A
MAX. S.P.L. (PEAK)
CONNECTORS 2x Neutrik®NL4 (parallel)
137dB @ 1m
CONSTRUCTION 18mm birch plywood
GRILLE Custom perforated metal grille, powder coated finishing
INSTALLATION, RIGGING, FLYING 4 wood feet, 4 side handles, 4x 100mm casters (not included)
DIMENSIONS (WxHxD) 1066x561x828mm
41.97x22.09x32.60in
86Kg
WEIGHT
189.6lbKg
MAN210_0
G218
2000W / 4Ohm
INPUT THRU
Passive subwoofer PROUDLY DEVELOPED
AND MANUFACTURED
IN PORTUGAL
EXPOSURE TO HIGH SOUND PRESSURE LEVELS MAY
CAUSE A PERMENENT HEARING LOSS. REFER TO USER
MANUAL.
PIN
SIGNAL
+1 -1 PIN
SIGNAL
+1 -1
Passive subwoofer
G218

www.moosesound.com 5
Dimensions
G218
Unit: mm (milimeters)
MAN210_0
561
828
1066
Passive subwoofer
G218

www.moosesound.com
PROUDLY DEVELOPED AND
MANUFACTURED IN PORTUGAL
PROFACTOR S.A
Rua do Padrão 52
4440-617 Valongo
PORTUGAL
Telf.: [phone]
Fax: [phone]
[e-mail]
MOOSE is a brand or PROFACTOR S.A.