Morgan MVF-WA80 User manual

USER MANUAL
Ventilation
Fan
MVF-WA80
MVF-WA100
MVF-WA120
E-mail: [e-mail]
www.morgan.my
Market Expansion
Services by
www.dksh.com.my
facebook.com/morganappliances

Wall
MODEL MVF- A80 MVF- A100 MVF- A120
RAtED VOLtAgE / FREquEnCy 220-240V~ 50Hz
RAtED AttAgE 30 35 40
AiR DELiVERy (m3/min) 8.1 12 18
nOisE (dB<A>) 42 45 52
2 3
MODEL A B C DE
MVF- A80 200 300 240 89 31
MVF- A100 250 345 288 88 36
MVF- A120 300 400 340 104 36
1. Body
2. Louver
3. Blade
4. Spinner
MEASUREMENT (mm)
CONNECTION PLAN
INSTALLATION METHOD
INSTALLATION INSTRUCTIONS
CARE & MAINTENANCE
PARTS IDENTIFICATION
SPECIFICATION
INSTALLATION INSTRUCTIONS
FOR YOUR SAFETY
To reduce the risk of injury, e ectric shocks, fire, ma function, and damage to
equipment - a ways observe the fo owing safety precautions.
1. Ensure cable connection is correctly secured and safe.
2. his equipment must be installed by a qualified technician.
3. Be sure to select the appropriate voltage before attempting to connect with power
supply. Use only with rated volatge.
4. Manually move fan blades to ensure it is free from obstruction that may prevent proper
fan operation before connecting to the power supply.
5. Ensure a ground clearance of more than 2.5m during installation.
6. Ensure yellow and green double coloured cables are properly grounded.
7. his equipment must be installed in accordance to installation instructions. Any
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
8. o avoid air backflow vented out from the equipment, ensure that windows and doors
facing the same direction as the vented air are shut.
9. Keep all packaging materials away from children’s reach.
10. Contact gap must be at least 3mm away from the pole disconnection.
11. his equipment is not intended for use by young children or infirm persons without
supervision.
12. Children should be supervised to ensure they do not play with the equipment .
13. he power cord cannot be replaced. Do not use the equipment if the power cord is
damaged.
1. Regular cleaning of the fan is recommended for optimal operation.
2. Safety Warning: Ensure the fan is switched off and before carrying out cleaning and
maintenance work.
3. Use a damp cloth (using water only) to wipe down the fan and surrounding housing.
4. Important Note: Do not use cleaning agents or solvents when cleaning this fan.
5. Do not allow water to come into contact with electrical parts such as motors & switches.
6. Do not immerse fan blades or other resinous parts in hot water over 60°C.