Morrell SW-MNG-24GE4/10GSFP User manual

SW-MNG-24GE4/10GSFP
24-Port 10/100/1000Mbps + 4-Port 10Gbps SFP
Managed Ethernet Switch
User Manual
Ver 1.0 |6/15/2016

1
Table of Contents
Chapter 1 Product Introduction .............................................................................................. 12
1.1 Product Overshow ......................................................................................................... 12
1.2 Features .......................................................................................................................... 12
1.3 Package Contents ......................................................................................................... 12
Chapter 2 External Component Description ...................................................................... 13
2.1 Front Panel ..................................................................................................................... 13
2.2 Rear Panel ...................................................................................................................... 14
Chapter 3 Installing and Connecting the Switch ............................................................... 15
3.1 Installation ....................................................................................................................... 15
3.1.1 Desktop Installation ............................................................................................ 15
3.1.2 Rack-mountable Installation in 19-inch Cabinet ............................................ 15
3.1.3 Power on the Switch .......................................................................................... 16
3.2 Connect Computer (NIC) to the Switch ...................................................................... 16
3.3 How to Login the Switch ............................................................................................... 17
Chapter 4 Switch Configuration ............................................................................................. 19
4.1 Switch basic configuration. ........................................................................................... 19
4.1.1 Switch basic configuration. ............................................................................... 19
4.1.1.1 Login user configuration. ........................................................................ 19
4.1.1.2 Login user authentication method configuration. ............................... 20
4.1.1.3 Login user security IP management. .................................................... 20
4.1.1.4 Basic configuration. ................................................................................. 21
4.1.1.5 Save current running-configuration. ..................................................... 21
4.1.2 SNMP configuration. .......................................................................................... 22
4.1.2.1 SNMP authentication. ............................................................................. 22
4.1.2.2 SNMP management. .............................................................................. 24
4.1.3 SSH management. ............................................................................................. 25
4.1.3.1 Switch on-off SSH. .................................................................................. 25
4.1.3.2 SSH management. .................................................................................. 26
4.1.4 Firmware update. ................................................................................................ 26
4.1.4.1 TFTP service. ........................................................................................... 26
4.1.4.2 FTP service. ............................................................................................. 27
4.1.5 Telnet server configuration. ............................................................................... 28
4.1.5.1 Telnet server state. .................................................................................. 29
4.1.5.2 Max number of telnet access connection. ........................................... 29
4.1.6 Maintenance and debugging command. ......................................................... 29
4.1.6.1 Debug command. .................................................................................... 30
4.1.6.2 Show clock. .............................................................................................. 30
4.1.6.3 Show cpu usage. ..................................................................................... 30
4.1.6.4 Show cpu show memory usage. ........................................................... 31
4.1.6.5 Show flash. ............................................................................................... 31
4.1.6.6 Show running-config. .............................................................................. 31
4.1.6.7 Show switchport interface. ..................................................................... 31

2
4.1.6.8 Show tcp. .................................................................................................. 32
4.1.6.9 Show udp. ................................................................................................. 32
4.1.6.10 Show telnet login. .................................................................................. 32
4.1.6.11 Show version. ........................................................................................ 33
4.2 Module management. ................................................................................................... 33
4.2.1 Show boot-files. .................................................................................................. 33
4.2.2 Set Boot IMG and Startup-Config. ................................................................... 34
4.3 Port configuration. .......................................................................................................... 34
4.3.1 Ethernet port configuration. ............................................................................... 34
4.3.1.1 Port layer 1 attribution configuration. ................................................... 35
4.3.1.2 Bandwidth control configuration. ........................................................... 36
4.3.1.3 Switchport description. ........................................................................... 37
4.3.1.4 Port combo forced mode config. ........................................................... 37
4.3.1.5 Port scan mode. ...................................................................................... 38
4.3.2 VLAN interface configuration. ........................................................................... 38
4.3.2.1 Add interface configuration. ................................................................... 38
4.3.2.2 L3 interface IP address mode configuration. ...................................... 38
4.3.3 SPAN configuration. ........................................................................................... 39
4.3.3.1 SPAN configuration. ................................................................................ 39
4.3.4 Loopback-detection configuration. ................................................................... 40
4.3.4.1 Port Loopback-detection mode configuration. .................................... 40
4.3.4.2 VLAN Loopback-detection configuration. ............................................ 41
4.3.4.3 Loopback-detection interval-time configuration. ................................. 41
4.3.4.4 Loopback-detection control recovery configuration. .......................... 41
4.3.5 Isolate-port configuration. .................................................................................. 42
4.3.5.1 Isolate-port configuration. ...................................................................... 42
4.3.5.2 Interface join group config. .................................................................... 42
4.3.5.3 Show Isolate-port group. ........................................................................ 42
4.3.6 Port storm-control config ................................................................................... 43
4.3.6.1 Storm-control config ................................................................................ 43
4.3.7 Port rate-violation config .................................................................................... 43
4.3.7.1 Port rate-violation config ........................................................................ 44
4.3.8 Port virtual-cable-test config. ............................................................................ 44
4.3.8.1 Virtual-cable-test configuration. ............................................................. 45
4.3.9 Port debug and maintenance. .......................................................................... 45
4.3.9.1 Show port information. ........................................................................... 45
4.3.9.2 Show entire traffic information. .............................................................. 4 6
4.3.9.3 Show rate violation port. ......................................................................... 46
4.3.10 ULDP configuration. ......................................................................................... 47
4.3.10.1 ULDP enable config. ............................................................................. 47
4.3.10.2 ULDP Hello message config. .............................................................. 4 8
4.3.10.3 ULDP recovery time config. ................................................................. 48
4.3.10.3 Show ULDP configuration.................................................................... 48
4.3.11 LLDP configuration. .......................................................................................... 48

3
4.3.11.1 LLDP configuration................................................................................ 49
4.3.11.2 LLDP port status config. ....................................................................... 49
4.3.11.3 LLDP tx-interval config. ........................................................................ 50
4.3.11.4 LLDP msgTxHold config. ..................................................................... 50
4.3.11.5 LLDP transmit delay config. ................................................................. 50
4.3.11.6 LLDP notification interval config. ......................................................... 50
4.3.11.7 LLDP neighbors max-num config. ...................................................... 51
4.3.11.8 LLDP too mangy neighbors config. .................................................... 51
4.3.11.9 LLDP transmit optional tlv config. ....................................................... 51
4.3.11.10 show LLDP configuration. .................................................................. 52
4.3.12 LED shutoff configuration. ............................................................................... 52
4.3.12.1 Time Range configuration. ................................................................... 52
4.3.12.2 LED shutoff config. ................................................................................ 53
4.3.13 Jumbo packet forwarding configuration. ....................................................... 53
4.4 MAC address table configuration. ............................................................................... 53
4.4.1 MAC address table configuration. ............................................................................ 54
4.4.2Configuration MAC address. ...................................................................................... 54
4.4.3 Delete MAC address. ......................................................................................... 54
4.4.4 MAC address query. ........................................................................................... 55
4.5 VLAN configuration. ...................................................................................................... 55
4.5.1 VLAN configuration. ........................................................................................... 55
4.5.1.1 VLAN ID configuration. ........................................................................... 56
4.5.1.2 Assign ports for VLAN. ........................................................................... 56
4.5.1.3 Set port mode(access/hybrid/trunk). .................................................... 57
4.5.1.4 VLAN setting for hybrid port. ................................................................. 57
4.5.1.5 VLAN setting for trunk port. ................................................................... 58
4.5.1.6 Private-vlan association. ........................................................................ 58
4.5.2 GVRP configuration. .......................................................................................... 58
4.5.2.1 Enable global GVRP. .............................................................................. 59
4.5.2.2 Enable GVRP on port. ............................................................................ 59
4.5.2.3 GARP configuration. ............................................................................... 59
4.5.3 VLAN-translation configuration......................................................................... 59
4.5.3.1 Enable/Disable VLAN-translation. ........................................................ 60
4.5.3.2 Add/Delete VLAN-translation. ................................................................ 60
4.5.3.3 VLAN-translation miss drop configuration. .......................................... 61
4.5.3.4 Show VLAN-translation. ......................................................................... 61
4.5.4 Dynamic VLAN configuration. ........................................................................... 61
4.5.5 Dot1q tunnel configuration. ............................................................................... 62
4.5.5.1 Enable dot1q tunnel. ............................................................................... 62
4.5.5.2 Dot1q tunnel tpid configuration. ............................................................ 62
4.6 IGMP snooping configuration....................................................................................... 63
4.6.1 Switch on-off IGMP snooping. .......................................................................... 63
4.6.2 IGMP snooping port enable. ............................................................................. 63
4.6.3 IGMP snooping configuration. .......................................................................... 64

4
4.6.4 IGMP snooping mrouter port configuration. ................................................... 64
4.6.5 IGMP snooping query configuration. ............................................................... 65
4.7 MLD snooping configuration. ....................................................................................... 65
4.7.1 Switch on-off MLD snooping. ............................................................................ 65
4.7.2 MLD snooping port enable. ............................................................................... 66
4.7.3 MLD snooping configuration. ............................................................................ 66
4.7.4 MLD snooping mrouter port configuration. ..................................................... 66
4.7.5 MLD snooping query configuration. ................................................................. 67
4.8 ACL configuration. ......................................................................................................... 67
4.8.1 Time Range configuration. ................................................................................ 67
4.8.2 Numeric ACL. ...................................................................................................... 68
4.8.2.1 Standard numeric ACL. .......................................................................... 68
4.8.2.2 Extended numeric ACL........................................................................... 69
4.8.2.3Delete Numeric ACL. ............................................................................... 70
4.8.3 Name ACL. .......................................................................................................... 71
4.8.3.1 Standard name ACL. ............................................................................... 71
4.8.3.2 Extended name ACL. .............................................................................. 71
4.8.3.3 Delete Name ACL. .................................................................................. 73
4.8.4 Firewall configuration. ........................................................................................ 74
4.8.5 Show ACL configuration. ................................................................................... 74
4.8.5.1 Show access list. ..................................................................................... 74
4.8.5.2 Show firewall. ........................................................................................... 75
4.8.5.3 Show time range. .................................................................................... 75
4.8.6 ACL binding configuration. ................................................................................ 75
4.8.6.1 Attach ACL to port. .................................................................................. 75
4.8.6.2 Show access group. ............................................................................... 76
4.8.6.3 Clear PACL Statistic. ............................................................................... 76
4.8.6.4 Attach ACL to vlan. .................................................................................. 76
4.8.6.5 Show VACL configuration. ..................................................................... 77
4.8.6.6 Clear vlan ACL statistic. ......................................................................... 77
4.9 IPv6 ACL configuration. ................................................................................................ 77
4.9.1 IPv6 standard access-list configuration. ......................................................... 77
4.9.2 IPv6 name access-list configuration. ............................................................... 78
4.9.3 Show IPv6 access list. ....................................................................................... 78
4.9.4 Attach IPv6 ACL to port. ..................................................................................... 78
4.9.5 Attach IPv6 ACL to vlan. .................................................................................... 79
4.10 AM configuration. ......................................................................................................... 79
4.10.1 AM global configuration. .................................................................................. 79
4.10.1.1 Enable/Disable AM. .............................................................................. 79
4.10.2 AM port configuration. ...................................................................................... 80
4.10.2.1 Enable/Disable AM port. ...................................................................... 80
4.10.2.2 AM IP-Pool configuration. .................................................................... 81
4.10.2.3 AM MAC-IP-Poll configuration. ........................................................... 81
4.10.3 Show AM port configuration. ........................................................................... 81

5
4.10.3.1 Show AM port configuration. ............................................................... 81
4.10.3.2 Clear port configuration. ....................................................................... 82
4.11 Port channel configuration. ......................................................................................... 82
4.11.1 LACP port group configuration. ...................................................................... 82
4.11.2 Delete port group. ............................................................................................. 83
4.11.3 Show port group info. ....................................................................................... 83
4.11.4 Show interface port-channel. .......................................................................... 83
4.11.5 Add member port. ............................................................................................. 84
4.11.6 Del member port. .............................................................................................. 84
4.11.7 Set LACP port priority. ..................................................................................... 84
4.11.8 Set LACP system priority. ................................................................................ 85
4.12 DHCP configuration. ................................................................................................... 85
4.12.1 DHCP management. ........................................................................................ 85
4.12.1.1 Enable DHCP. ........................................................................................ 86
4.12.2 DHCP server configuration. ............................................................................ 86
4.12.2.1 Dynamic pool configuration. ................................................................ 86
4.12.2.2 Manual DHCP IP pool configuration. ................................................. 89
4.12.2.3 Address pool name configuration. ...................................................... 90
4.12.2.4 DHCP packet statistics. ........................................................................ 90
4.12.3 DHCP relay configuration. .............................................................................. 91
4.12.4 DHCP debugging. ............................................................................................ 91
4.12.4.1 Delete record. ........................................................................................ 92
4.12.4.2 Show IP-MAC binding. ......................................................................... 93
4.12.4.3 Show conflict-logging. .......................................................................... 93
4.13 DHCP Snooping configuration................................................................................... 93
4.13.1 DHCP Snooping global configuration. ........................................................... 93
4.13.1.1 Enable/Disable DHCP Snooping. ....................................................... 94
4.13.1.2 DHCP Snooping binding configuration. ............................................. 94
4.13.1.3 DHCP Snooping binding user configuration. .................................... 94
4.13.1.4 DHCP Snooping action count config. ................................................. 95
4.13.1.5 DHCP Snooping limit-rate config. ....................................................... 95
4.13.1.6 DHCP Snooping helper-server config. ............................................... 95
4.13.2 DHCP Snooping port configuration. .............................................................. 9 6
4.13.2.1 Enable/Disable DHCP Snooping binding dot1x. .............................. 96
4.13.2.2 Enable/Disable DHCP Snooping binding user. ................................ 96
4.13.2.3 Enable/Disable DHCP Snooping trust. .............................................. 97
4.13.2.4 DHCP Snooping action config. ........................................................... 97
4.13.3 Show DHCP Snooping configuration. ........................................................... 98
4.14 SNTP configuration. .................................................................................................... 98
4.14.1 SNTP server configuration. ............................................................................. 98
4.14.2 Request interval configuration. ....................................................................... 99
4.14.3 Time difference configuration. ........................................................................ 99
4.14.4 Show SNTP. ...................................................................................................... 99
4.15 NTP configuration. ..................................................................................................... 100

6
4.15.1 NTP global configuration. .............................................................................. 100
4.15.1.1 NTP global switch configuration. ...................................................... 100
4.15.1.2 NTP server configuration. .................................................................. 100
4.15.1.3 NTP broadcast or multicast address count configuration. ............ 101
4.15.1.4 NTP access group configuration. ..................................................... 101
4.15.1.5 NTP authenticate configuration. ....................................................... 101
4.15.2 NTP interface configuration. ......................................................................... 102
4.15.2.1 NTP interface switch configuration. .................................................. 102
4.15.3 NTP configuration display. ............................................................................ 102
4.15.3.1 NTP status display. ............................................................................. 103
4.16 QoS configuration. ..................................................................................................... 103
4.16.1 QoS port configuration. ................................................................................. 103
4.16.1.1 QoS port trust state configuration. .................................................... 104
4.16.1.2 QoS port cos parameters configuration. .......................................... 104
4.16.1.3 QoS port select queue schedule algorithm configuration. ............ 105
4.16.1.4 QoS port WRR algorithm queue weight configuration. ................. 105
4.16.1.5 QoS port WDRR algorithm queue weight configuration. .............. 106
4.16.1.6 QoS port queue bandwidth configuration. ....................................... 107
4.16.1.7 QoS service policy configuration. ..................................................... 107
4.16.2 QoS class-map configuration. ...................................................................... 108
4.16.2.1 Class map-configuration. ................................................................... 108
4.16.2.2 Classification criteria configuration. .................................................. 108
4.16.3 QoS policy-map configuration. ..................................................................... 109
4.16.3.1 Policy-map configuration. .................................................................. 109
4.16.3.2 Class-map use to policy-map configuration. ................................... 109
4.16.4 QoS policy-class-map configuration. ........................................................... 109
4.16.4.1 Policy-class-map accounting configuration. .................................... 110
4.16.4.2 Aggregate policy configuration. ......................................................... 110
4.16.4.3 Policy-class-map policy configuration. ............................................. 110
4.16.4.4 Policy-class-map set configuration. .................................................. 111
4.16.5 QoS mapping configuration. ......................................................................... 112
4.16.5.1 COS-to-IntP mapping. ........................................................................ 112
4.16.5.2 COS-to-IntP mapping. ........................................................................ 113
4.16.5.3 DSCP-to-DSCP mapping. .................................................................. 113
4.16.5.4 DSCP-to-IntP mapping. ...................................................................... 114
4.16.5.5 DSCP-to-DP mapping. ....................................................................... 114
4.16.6 QoS aggregate policy configuration. ........................................................... 115
4.16.7 QoS service policy configuration. ................................................................ 116
4.17 L3 forward configuration. .......................................................................................... 116
4.17.1 IP route Aggregation configuration. ............................................................. 116
4.17.1.1 Route aggregate configuration. ........................................................ 116
4.17.2 ARP configuration. ......................................................................................... 117
4.17.2.1 ARP configuration. .............................................................................. 117
4.17.2.2 Clear ARP cache. ................................................................................ 117

7
4.17.2.3 Show ARP. ........................................................................................... 118
4.17.2.4 Proxy ARP configuration. ................................................................... 118
4.17.3 Gratuitous ARP config. .................................................................................. 118
4.17.3.1 Gratuitous-ARP interval time configuration. .................................... 119
4.17.3.2 Interface Gratuitous-ARP interval time configuration. ................... 119
4.17.3.3 Show Gratuitous-ARP configuration. ............................................... 119
4.17.4 ARP protection configuration. ....................................................................... 120
4.17.4.1 ARP protection configuration. ............................................................ 120
4.17.4.2 ANTI-ARPSCAN configuration. ......................................................... 121
4.17.5 Show IP Traffic. ............................................................................................... 124
4.18 Route configuration. .................................................................................................. 125
4.18.1 Static route configuration. ............................................................................. 125
4.18.1.1 Static route configuration. .................................................................. 126
4.18.2 RIP configuration. ........................................................................................... 126
4.18.2.1 Enable RIP. .......................................................................................... 127
4.18.2.2 Clear IP Route configuration. ............................................................ 127
4.18.2.3 Default configuration........................................................................... 128
4.18.2.4 Distance configuration. ....................................................................... 128
4.18.2.5 Distribute-list configuration. ............................................................... 128
4.18.2.6 Interface RIP configuration. ............................................................... 129
4.18.2.7 Key or key-chain configuration. ........................................................ 129
4.18.2.8 Send-LifeTime configuration. ............................................................ 130
4.18.2.9 Accept-LiftTime configuration. ........................................................... 130
4.18.2.10 RIP maximum-prefix. ........................................................................ 131
4.18.2.11 Neighbor configuration. .................................................................... 131
4.18.2.12 Network configuration. ..................................................................... 131
4.18.2.13 Offset-list configuration. ................................................................... 131
4.18.2.14 Passive interface configuration. ...................................................... 132
4.18.2.15 Receive buffer size configuration. .................................................. 132
4.18.2.16 Receive route configuration. ........................................................... 132
4.18.2.17 RIP route configuration. ................................................................... 133
4.18.2.18 RIP timer configuration. ................................................................... 133
4.18.2.19 Version configuration. ....................................................................... 133
4.18.3 OSPF configuration. ....................................................................................... 134
4.18.3.1 OSPF enable. ...................................................................................... 134
4.18.3.2 OSPF area configuration. .................................................................. 135
4.18.3.3 OSPF interface configuration. ........................................................... 136
4.18.3.4 Other parameters configuration. ....................................................... 137
4.18.4 IP Prefix configuration. .................................................................................. 138
4.18.4.1 IP prefix list. ......................................................................................... 138
4.18.4.2 IP prefix description. ........................................................................... 138
4.18.4.3 Show IP prefix-list. .............................................................................. 139
4.18.5 Show IP route. ................................................................................................ 139
4.19 IPv6 Route configuration. ......................................................................................... 139

8
4.19.1 IPv6 configuration. ......................................................................................... 139
4.19.1.1 IPv6 basic configuration. .................................................................... 140
4.19.1.2 IPv6 ND configuration. ....................................................................... 140
4.19.1.3 Show IPv6 neighbor. ........................................................................... 140
4.19.2 Show IPv6 route. ............................................................................................ 141
4.19.2.1 Show IPv6 route database. ............................................................... 141
4.19.2.2 Show IPv6 NSM route. ....................................................................... 141
4.19.2.3 Show IPv6 FIB. .................................................................................... 141
4.19.2.4 Show IPv6 route statistics.................................................................. 142
4.20 Multicast protocol configuration. .............................................................................. 142
4.20.1 DCSCM configuration. ................................................................................... 142
4.20.1.1 DCSCM Source-control enable/disable configuration. .................. 143
4.20.1.2 DCSCM destination-control enable/disable configuration. ........... 143
4.20.1.3 DCSCM Source-control access-group configuration. .................... 144
4.20.1.4 DCSCM destination-control access-group configuration. ............. 144
4.20.1.5 DCSCM destination-control access-group configuration(SIP). .... 144
4.20.1.6 DCSCM destination-control access-group configuration(vMAC). 145
4.20.1.7 Multicast policy configuration. ........................................................... 145
4.20.1.8 ACL multicast source control. ............................................................ 145
4.20.2 IGMP configuration. ....................................................................................... 146
4.20.2.1 Access-group and immediate leave configuration. ........................ 146
4.20.2.2 IGMP query-interval configuration. ................................................... 147
4.20.2.3 Max response-time and timeout configuration. .............................. 147
4.20.2.4 Limit and Version configuration. ........................................................ 148
4.20.2.5 IGMP Join Group configuration. ....................................................... 148
4.20.2.6 IGMP Static Group configuration. ..................................................... 149
4.21 IPv6 Multicast protocol configuration. ..................................................................... 149
4.21.1 MLD configuration. ......................................................................................... 149
4.21.1.1 MLD access-group and immediate leave configuration. ............... 149
4.21.1.2 MLD query-interval configuration...................................................... 150
4.21.1.3 MLD max response-time and timeout configuration. ..................... 150
4.21.1.4 MLD Limit and Version configuration. .............................................. 151
4.21.1.5 MLD Join Group configuration. ......................................................... 151
4.21.1.6 MLD Static Group configuration. ....................................................... 152
4.22 VRRP configuration. .................................................................................................. 152
4.22.1 VRRP set. ........................................................................................................ 152
4.22.1.1 Create VRRP ID. ................................................................................. 153
4.22.1.2 VRRP virtual IP configuration. ........................................................... 153
4.22.1.3 VRRP interface. ................................................................................... 153
4.22.1.4 VRRP enable. ...................................................................................... 154
4.22.1.5 VRRP preempt. ................................................................................... 154
4.22.1.6 VRRP priority. ...................................................................................... 154
4.22.1.7 VRRP interval. ..................................................................................... 155
4.22.1.8 VRRP circuit......................................................................................... 155

9
4.22.2 Show VRRP information. .............................................................................. 155
4.23 Spanning- tree configuration. ................................................................................... 156
4.23.1 Spanning-tree field configuration. ................................................................ 156
4.23.1.1 Instance configuration. ....................................................................... 156
4.23.1.2 Field name configuration. .................................................................. 156
4.23.1.3 Revision-level configuration. ............................................................. 157
4.23.2 Spanning-tree Port configuration. ................................................................ 157
4.23.2.1 PortFast configuration. ....................................................................... 158
4.23.2.2 Port priority configuration. .................................................................. 158
4.23.2.3 Port cost configuration. ...................................................................... 159
4.23.2.4 Spanning-tree port mode. .................................................................. 159
4.23.2.5 Link-type configuration. ...................................................................... 159
4.23.2.6 Spanning-tree agreement port configuration. ................................. 160
4.23.3 Spanning-tree global configuration. ............................................................. 161
4.23.3.1 Spanning-tree global agreement port configuration. ...................... 161
4.23.3.2 Forward-time configuration. ............................................................... 161
4.23.3.3 Hello-time configuration. .................................................................... 162
4.23.3.4 Max age time configuration. .............................................................. 162
4.23.3.5 Max hop time configuration. .............................................................. 162
4.23.3.6 Spanning tree mode configuration.................................................... 163
4.23.3.7 Spanning tree cost-format configuration. ......................................... 163
4.23.3.8 Priority configuration. .......................................................................... 163
4.23.4 Show Spanning-tree. ..................................................................................... 164
4.23.4.1 Instance information. .......................................................................... 164
4.23.4.2 Revision-Level information. ............................................................... 164
4.24 MRPP configuration. ................................................................................................. 165
4.24.1 MRPP global configuration. .......................................................................... 165
4.24.1.1 MRPP global switch configuration. ................................................... 165
4.24.1.2 MRPP poll time configuration. ........................................................... 166
4.24.1.3 MRPP domain id configuration. ........................................................ 166
4.24.2 MRPP port configuration. .............................................................................. 166
4.24.2.1 MRPP port property configuration. ................................................... 166
4.24.3 MRPP domain configuration. ........................................................................ 167
4.24.3.1 MRPP control vlan config. ................................................................. 167
4.24.3.2 MRPP node mode config. .................................................................. 168
4.24.3.3 MRPP hello timer config. ................................................................... 168
4.24.3.4 MRPP fail timer config. ....................................................................... 168
4.24.3.5 MRPP domain switch config. ............................................................. 169
4.24.4 MRPP configuration display. ......................................................................... 169
4.24.4.1 MRPP statistics display. ..................................................................... 170
4.24.4.2 MRPP display. ..................................................................................... 170
4.24.4.3 Clear MRPP statistics. ........................................................................ 170
4.25 ULPP configuration. .................................................................................................. 170
4.25.1 ULPP global configuration. ........................................................................... 171

10
4.25.1.1 ULPP group configuration. ................................................................ 171
4.25.2 ULPP port configuration. ............................................................................... 171
4.25.2.1 ULPP port property configuration. .................................................... 171
4.25.3 ULPP group configuration. ............................................................................ 172
4.25.3.1 ULPP description configuration. ....................................................... 172
4.25.3.2 ULPP group property configuration. ................................................. 172
4.25.4 ULPP configuration display. .......................................................................... 173
4.25.4.1 ULPP group configuration display. ................................................... 173
4.25.4.2 ULPP port statistics display. .............................................................. 173
4.25.4.3 ULPP port property display. ............................................................... 174
4.25.4.4 ULPP port statistics clear. .................................................................. 174
4.26 ULSM configuration. .................................................................................................. 174
4.26.1 ULSM global configuration. ........................................................................... 174
4.26.1.1 ULSM group configuration. ................................................................ 175
4.26.2 ULSM port configuration. .............................................................................. 175
4.26.2.1 ULSM port property configuration. ................................................... 175
4.26.3 ULSM configuration display. ......................................................................... 176
4.26.3.1 ULSM display. ...................................................................................... 176
4.27 Cluster basic configuration. ...................................................................................... 176
4.27.1 Cluster configuration. ..................................................................................... 176
4.27.2 Cluster candidate information....................................................................... 177
4.27.3 Cluster member information. ........................................................................ 177
4.27.4 Cluster member configuration. ..................................................................... 177
4.27.5 Cluster member auto configuration. ............................................................ 178
4.27.6 Cluster member reset. ................................................................................... 178
4.27.7 Cluster topology configuration. ..................................................................... 178
4.27.8 Cluster topology information. ........................................................................ 178
4.28 Authentication configuration. .................................................................................... 179
4.28.1 RADIUS client configuration. ........................................................................ 179
4.28.1.1 RADIUS global configuration. ........................................................... 179
4.28.1.2 RADIUS authentication configuration. ............................................. 180
4.28.1.3 RADIUS accounting configuration. ................................................... 180
4.28.2 TACACS server configuration. ..................................................................... 181
4.28.2.1 TACACS global configuration. ........................................................... 181
4.28.2.2 TACACS server host configuration. .................................................. 181
4.28.3 802.1x configuration. ..................................................................................... 182
4.28.3.1 802.1x Global configuration. .............................................................. 182
4.28.3.2 802.1x port authentication configuration. ........................................ 183
4.28.3.3 802.1x port MAC configuration list. .................................................. 184
4.28.3.4 802.1x port status list. ........................................................................ 184
4.28.4 MAB configuration. ......................................................................................... 184
4.28.4.1 MAB ENABLE configuration. ............................................................. 184
4.28.4.2 MAB Authentication configuration. ................................................... 185
4.28.4.3 MAB parameter configuration. .......................................................... 185

11
4.28.4.4 MAB show. ........................................................................................... 186
4.29 PoE Config. ................................................................................................................ 186
4.29.1 PoE global config. .......................................................................................... 186
4.29.1.1 PoE global config ................................................................................ 186
4.29.2 PoE port config. .............................................................................................. 187
4.29.2.1 PoE port config .................................................................................... 187
4.30 DOS attack protection configuration. ...................................................................... 188
4.30.1 Source IP equal destination IP DOS attack protection configuration. .... 188
4.30.2 Source port equal destination port DOS attack protection configuration.189
4.30.3 TCP DOS attacks on invalid flags configuration. ....................................... 189
4.30.4 ICMP DOS attack protection configuration. ................................................ 190
4.30.5 ICMP packet-size configuration. .................................................................. 190
4.30.6 First fragment IP packet DOS attack protection configuration. ............... 191
4.31 SSL config. ................................................................................................................. 191
4.31.1 IP HTTP server configuration. ...................................................................... 192
4.31.2 SSL global configuration. .............................................................................. 192
4.31.3 SSL server monitor port configuration......................................................... 192
4.31.4 SSL secure-ciphersuite configuration. ........................................................ 192
4.32 sFLOW configuration. ............................................................................................... 193
4.32.1 sFLOW collector global address configuration. ......................................... 193
4.32.2 sFLOW collector port address configuration. ............................................. 194
4.32.3 sFLOW agent address configuration. .......................................................... 194
4.32.4 sFLOW priority configuration. ....................................................................... 194
4.32.5 sFLOW header length configuration. .......................................................... 194
4.32.6 sFLOW data length configuration. ............................................................... 195
4.32.7 sFLOW rate configuration. ............................................................................ 195
4.32.8 sFLOW counter interval configuration. ........................................................ 195
4.32.9 sFLOW analyzer configuration. .................................................................... 196
4.33 IPv6 security ra configuration. ................................................................................. 196
4.33.1 IPv6 security ra global configuration. .......................................................... 196
4.33.2 IPv6 security ra port configuration. .............................................................. 196
4.33.3 Show IPv6 security ra. ................................................................................... 197
4.34 Device log message. ................................................................................................. 197
4.34.1 Show device log message in buffer. ............................................................ 197
4.34.2 Show logging flash. ........................................................................................ 198
4.34.3 Clear logging in logbuff channel. .................................................................. 198
Appendix: Technical Specifications .................................................................................... 199

12
Chapter 1 Product Introduction
Congratulations on your purchasing of the Ethernet Switch. Before you install and use this
product, please read this manual carefully for fully exploiting the functions of this product.
1.1 Product Overshow
This is a new generation designed for high security and high performance network the
second layer switch. Provides twenty-four 10/100/1000Mbps self-adaption RJ45 port, plus
four 10 Gigabit --1000/10000Mbps SFP+ optical port, it can be used to link bandwidth
higher upstream equipment. Using store-and-forward technology, combined with dynamic
memory allocation. Ensure bandwidth effective allocation to each port. Special design is a
flow control.It can avoid packet loss effectively when nodes in the sending and receiving
data. Built-in high reliability, design for wide voltage input application power supply, even if
the voltage is not stable of power grid, also can guarantee the equipment can work
normally.
The Switch is easy to install and use; It requires no configuration and installation; It is a
great selection for expanding office network.
1.2 Features
 Supports IEEE 802.3, IEEE 802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.3az.
 Integrated High-Performance Cortex-A9 processor.
 Supports MAC address auto-learning and auto-aging.
 Twenty-four 10/100/1000Mbps self-adaption RJ45 port, plus four 10 gigabit port ---
10/100/1000/10000Mbps SFP+ optical port, it can be used to link bandwidth higher
upstream equipment.
 Store and forward mode operates.
 LED indicators for monitoring power, link/activity.
 Support QoS, port mirroring, link aggregation protocol.
 19 inches full metal iron shell and internal power adapter design, suitable for rack
installation.
1.3 Package Contents
Before installing the Switch, make sure that the following the "packing list" listed OK. I
f any part is lost and damaged, please contact your local agent immediately. In additi
on, make sure that you have the tools install switches and cables by your hands.
 One 24-Port 10/100/1000Mbps +
4-Port 10 Gigabit Web Smart Ethernet Switch
 One set of installation components
 One AC power cord

One User Manual

Chapter 2 External Component Description
2.1 Front Panel
The front panel of the Switch consists of series of LED indicators, 24 x
10/100/1000Mbps RJ-45 ports, 4 x 1000/10000Mbps SFP+ ports, 1 Console port, A
reset button, A series of LED lights:
Figure 1 - Front Panel
10/100/1000Mbps RJ-45 ports (1~24):
Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or 1000Mbps.
Each has a corresponding Link LED.
SFP+ ports (25S, 26S, 27S, 28S):
Designed to install the SFP+ module and connect to the device with a bandwidth of
1000Mbps or 10000Mbps. Each has a corresponding Link/Act（1000M and 10G）LED.
Control port (Console):
It is used to connect a computer or terminal serial implementation of monitoring and
configuring the switch.
Reset key (Reset):
Keep the device is turned on and press the button for about 4 seconds.The system restore
the factory default settings.
LED indicators:
The LED Indicators will allow you to monitor, diagnose and troubleshoot any potential
problem with the Switch, connection or attached devices.
Figure 2 - LED Indicators
The following chart shows the LED indicators of the Switch along with explanation of each
indicator.

LED COLOR STATUS STATUS DESCRIPTION
PWR Green
On Power On
Off Power Off
1~28LED Green
On A device is connected to the port
Off A device is disconnected to the port
Flashing Sending or receiving data
2.2 Rear Panel
The rear panel of the Switch contains AC power connector shown as below.
Figure 3 - Rear Panel
AC Power Connector:
Power is supplied through an external AC power adapter. It
supports AC 100~240V,
50/60Hz.
Grounding Terminal:
Located on the left side of the power supply connector, use wire grounded to prevent
electric shock.

Chapter 3 Installing and Connecting the Switch
This part describes how to install your Ethernet Switch and make connections to it. Please
read the following topics and perform the procedures in the order being presented.
3.1 Installation
Please follow the following instructions in avoid of incorrect installation causing device
damage and security threat.
 Put the Switch on stable place or desktop in case of falling damage.
 Make sure the Switch works in the proper AC input range and matches the voltage
labeled on the Switch.
 To keep the Switch free from lightning, do not open the Switch’s shell even in power
failure.
 Make sure that there is proper heat dissipation from and adequate ventilation around
the Switch.
 Make sure the cabinet to enough back up the weight of the Switch and its
accessories.
3.1.1 Desktop Installation
Sometimes users are not equipped with the 19-inch standard cabinet. So when installing
the Switch on a desktop, please attach these cushioning rubber feet provided on the
bottom at each corner of the Switch in case of the external vibration. Allow adequate
space for ventilation between the device and the objects around it.
Figure 4 - Desktop installation
3.1.2 Rack-mountable Installation in 19-inch Cabinet
The Switch can be mounted in an EIA standard-sized, 19-inch rack, which can be placed
in a wiring closet with other equipment. To install the Switch, please follow these steps:

a. attach the mounting brackets on the Switch’s side panels (one on each side) and
secure them with the screws provided.
Figure 5 - Attaching Brackets
b. use the screws provided with the equipment rack to mount the Switch on the rack and
tighten it.
Figure 6 - Mounting Switch
3.1.3 Power on the Switch
The Switch is powered on by the AC 100~240V 50/60Hz internal high-performance power
supply. Please follow the next tips to connect:
AC Electrical Outlet:
It is recommended to use single-phase three-wire receptacle with neutral outlet or
multifunctional computer professional receptacle. Please make sure to connect the metal
ground connector to the grounding source on the outlet.
AC Power Cord Connection:
Connect the AC power connector in the back panel of the Switch to external receptacle
with the included power cord, and check the power indicator is ON or not. When it is ON, it
indicates the power connection is OK.
3.2 Connect Computer (NIC) to the Switch
Please insert the NIC into the computer, after installing network card driver, please

connect one end of the twisted pair to RJ-45 jack of your computer, the other end will be
connected to any RJ-45 port of the Switch, the distance between Switch and computer is
around 100 meters. Once the connection is OK and the devices are power on normally,
the Link/ACT status indicator lights corresponding ports of the Switch.
Figure 7 - Connect Computer (NIC) to the Switch
3.3 How to Login the Switch
As the Switch provides Web-based management login, you can configure your computer’s
IP address manually to log on to the Switch. The default settings of the Switch are shown
below.
Parameter Default Value
Default IP address 192.168.2.1
Default user name admin
Default password admin
You can log on to the welcome window of the Switch through following steps:
a. Connect the Switch with the computer NIC interface.
b. Power on the Switch.
c. Check whether the IP address of the computer is within this network segment:
192.168.2.xxx ("xxx" ranges 2~254), for example, 192.168.2.100.
d. Open the browser, and enter http://192.168.2.1 and then press "Enter". The Switch
login window appears, as shown below.
e.
f. Enter the ID and Password (The default ID is admin.Password is admin), and then

click "OK" to log in to the Switch configuration window as below.
In the Web GUI, the left column shows the configuration menu and the rest of the screen
area displays the configuration settings.

Chapter 4 Switch Configuration
Switch configuration interface consists of 3 main areas, areas for the status bar at the top,
the area on the left menu bar, right the main configuration window. Blue in the status bar
indicates the RJ45 port connected, black corresponds to the RJ45 port means port is not
connected. Select the different functions in the function menu bar, you can modify all
settings in the main configuration window.
4.1 Switch basic configuration.
Choose Switch basic configuration, and the following page appears.
There are"Switch basic configuration", "SNMP configuration", "SSH management",
"Firmware update", "Telnet server configuration", "Maintenance and debugging command",
configuration web pages.
4.1.1 Switch basic configuration.
Choose Switch basic configuration > Switch basic configuration, and the following
page appears.There are "Login user configuration", "Login user authentication method
configuration", "Login user security IP management", "Basic configuration", "Save current
running-configuration", configuration web pages.
4.1.1.1 Login user configuration.
Choose Switch basic configuration > Switch basic configuration > Login user
configuration, and the following page appears.Enter the user name and password, and
choose whether to encrypt the text, and sets the user priority, then you want to add or
remove users.