Mortara Quinton CR60 User manual
TABLE OF CONTENTS
REF 042102-001 Rev C1
CR60
REHABILITATION TREADMILL
USER MANUAL
Manufactured by Mortara Instrument, Inc., Milwaukee, Wisconsin U.S.A.
CAUTION: Federal law restricts this device to sale by or on the order of a physician.
Copyright © 2015
by Mortara Instrument, Inc.
7865 N. 86th Street
Milwaukee, Wisconsin 53224
This document contains confidential information that belongs to Mortara Instrument, Inc. No part of this document
may be transmitted, reproduced, used, or disclosed outside of the receiving organization without the express written
consent of Mortara Instrument, Inc. Mortara is a registered trademark of Mortara Instrument, Inc. Quinton is a
registered trademark of Mortara Instrument, Inc. 2015-11
i
TABLE OF CONTENTS
1. PREFACE.................................................................................................................................................1
LIABILITYNOTICE............................................................................................................................................................1
2. GENERAL STATEMENTS.......................................................................................................................2
TECHNICALSUPPORTANDSERVICE.....................................................................................................................................2
3. NOTICES ..................................................................................................................................................3
MANUFACTURER’SRESPONSIBILITY....................................................................................................................................3
RESPONSIBILITYOFTHECUSTOMER....................................................................................................................................3
EQUIPMENTIDENTIFICATION.............................................................................................................................................3
COPYRIGHTANDTRADEMARKNOTICES...............................................................................................................................3
OTHERIMPORTANTINFORMATION.....................................................................................................................................3
4. WARRANTY INFORMATION...................................................................................................................5
YOURMORTARAWARRANTY............................................................................................................................................5
5. USER SAFETY INFORMATION ..............................................................................................................7
WARNINGSANDCAUTIONS..............................................................................................................................................7
6. EQUIPMENT SYMBOLS AND MARKINGS ............................................................................................9
SYMBOLDELINEATION.....................................................................................................................................................9
7. GENERAL CARE ...................................................................................................................................11
DISINFECTION..............................................................................................................................................................11
DAILY.........................................................................................................................................................................11
WEEKLY......................................................................................................................................................................11
PERIODIC....................................................................................................................................................................11
8. ELECTROMAGNETIC COMPATABILITY (EMC) .................................................................................13
9. INTRODUCTION.....................................................................................................................................17
CR60TREADMILL.........................................................................................................................................................17
TREADMILLCONFIGURATION..........................................................................................................................................17
CONTROLS...................................................................................................................................................................17
Power...................................................................................................................................................................17
Controller.............................................................................................................................................................18
CONTROLLERKEYS........................................................................................................................................................19
DISPLAYSANDINDICATORS.............................................................................................................................................20
Displays................................................................................................................................................................20
Indicators.............................................................................................................................................................20
SETTINGTHESPEEDRANGE............................................................................................................................................21
LIMITCONTROLS..........................................................................................................................................................21
LimitedAccess......................................................................................................................................................21
TimeLimit............................................................................................................................................................21
SpeedLimit..........................................................................................................................................................21
ACCESSORIESANDOPTIONS............................................................................................................................................22
10. OPERATING THE TREADMILL...........................................................................................................23
GUIDELINESFORSAFEOPERATION...................................................................................................................................23
CONTROLS...................................................................................................................................................................23
TABLE OF CONTENTS
ii
Five‐minuteAutoReset........................................................................................................................................24
Limited‐AccessControl.........................................................................................................................................24
TimeLimitControl................................................................................................................................................25
SpeedLimitControl..............................................................................................................................................25
UnitsDefaultSetting............................................................................................................................................26
GUIDELINESFORGETTINGONANDOFFTHETREADMILL.......................................................................................................26
OPERATINGTHETREADMILL............................................................................................................................................27
11. MAINTENANCE/TROUBLESHOOTING..............................................................................................29
DAILYVISUALINSPECTION..............................................................................................................................................29
CLEANING...................................................................................................................................................................29
Exterior................................................................................................................................................................29
Interior.................................................................................................................................................................29
DISINFECTION..............................................................................................................................................................30
ADJUSTMENTS.............................................................................................................................................................30
BeltTension.........................................................................................................................................................30
BeltTracking........................................................................................................................................................31
CUMULATIVEUSAGE.....................................................................................................................................................32
Distance...............................................................................................................................................................32
Time.....................................................................................................................................................................32
ELECTRICALTESTING.....................................................................................................................................................32
MOVINGANDSTORINGTHETREADMILL............................................................................................................................33
Re‐use..................................................................................................................................................................33
TROUBLESHOOTING.......................................................................................................................................................33
ERRORCODES..............................................................................................................................................................34
Self‐testErrors.....................................................................................................................................................34
OperationCodes..................................................................................................................................................34
TROUBLESHOOTINGGUIDE.............................................................................................................................................35
12. SPECIFICATIONS................................................................................................................................37
CR60SPECIFICATIONS...................................................................................................................................................37
POWERREQUIREMENTS.................................................................................................................................................37
Controller.............................................................................................................................................................38
SPEEDVS.WEIGHTRANGE.............................................................................................................................................40
%GRADEVS.ANGLERELATIONSHIP.................................................................................................................................41
13. RECEIVING AND INSTALLATION......................................................................................................43
RECEIVING...................................................................................................................................................................43
INSTALLATIONNOTICE...................................................................................................................................................43
SITEREQUIREMENTS.....................................................................................................................................................43
INSTALLATION..............................................................................................................................................................44
Tools.....................................................................................................................................................................44
Procedure.............................................................................................................................................................44
TESTINGTHETREADMILLANDCONTROLLER.......................................................................................................................47
14. CONTROLS, DISPLAYS, INDICATORS .............................................................................................49
CONTROLS...................................................................................................................................................................49
Power...................................................................................................................................................................49
Units.....................................................................................................................................................................49
StartBelt..............................................................................................................................................................49
Up/Down..............................................................................................................................................................49
Faster/Slower.......................................................................................................................................................49
TABLE OF CONTENTS
iii
+/‐........................................................................................................................................................................49
Clear.....................................................................................................................................................................50
Select....................................................................................................................................................................50
CoolDown............................................................................................................................................................50
StopBelt...............................................................................................................................................................50
5‐MinuteAutoReset............................................................................................................................................50
LimitedAccessControl.........................................................................................................................................50
TimeLimitControl................................................................................................................................................51
SpeedLimitControl..............................................................................................................................................51
UnitsDefaultSetting............................................................................................................................................51
DISPLAYS....................................................................................................................................................................52
Grade...................................................................................................................................................................52
Speed...................................................................................................................................................................52
MultifunctionDisplay...........................................................................................................................................52
INDICATORS.................................................................................................................................................................52
EnterWeight........................................................................................................................................................52
EnterTime............................................................................................................................................................52
Multifunction.......................................................................................................................................................53
Units.....................................................................................................................................................................53
TABLE OF CONTENTS
iv
v
TABLE OF FIGURES
Figure 1 Treadmill Configuration................................................................................................................................17
Figure 2 Hood Configuration Plate for Treadmill .......................................................................................................18
Figure 3 Example of Controller...................................................................................................................................18
Figure 4 Activate Limit Access Control......................................................................................................................24
Figure 5 Adjustment bolts ...........................................................................................................................................30
Figure 6 Speed vs. Weight graph.................................................................................................................................40
Figure 7 %Grade vs. Angle Graph...............................................................................................................................41
Figure 8 Controller Uprights .......................................................................................................................................44
Figure 9 Placing Hood on Treadmill ...........................................................................................................................45
Figure 10 Grounding brackets, Step 8.........................................................................................................................45
Figure 11 Installing the hood.......................................................................................................................................46
TABLE OF FIGURES
vi
1
1. PREFACE
This manual contains the patient and user safety requirements, operating instructions and maintenance requirements
for the Quinton®CR60 rehabilitation treadmills. The manual is intended for use by trained clinicians working with
cardiac or sports rehabilitation patients in a clinical setting. It is expected that the clinician will instruct the patient in
the proper use of the treadmill and its accessories. Before using the treadmill, read the manual carefully, noting the
Safety Requirements in Appendix A.
There are no user-serviceable parts in the treadmill. Any attempt by non- Mortara-authorized personnel to service
the equipment may void the warranty. Upon request, Mortara will provide a technical document containing block-
level theory of operation, troubleshooting, removal and replacement instructions (by module), maintenance, and
other information that will assist appropriately-trained personnel to repair those parts of the equipment designated by
Mortara as repairable.
Liability Notice
Failure to follow the conditions set forth below shall limit, to the extent allowed by law, Mortara responsibility for
the safety, reliability, and performance of this equipment:
The operator manual must be read in full by each operator before the product is first used.
Assembly operations, extensions, readjustments, modifications, or repairs must be carried out only by Mortara-
trained or Mortara-authorized personnel.
The electrical wiring within the treadmill’s setting and the electrical installation of the treadmill must comply with
the applicable local or provincial requirements.
The equipment must be used in accordance with the instructions for use.
CAUTION! Accessory equipment connected to analog, digital, or power interfaces must be either equipment
offered for sale by Mortara Instrument, Inc. or equipment that, when connected to such interfaces, maintains
the safety and specified performance of the overall system and the individual devices. For example, such
safety is maintained if the individual equipment and overall system complies with relevant safety
requirements found in International Electrotechnical Commission (IEC) standards.
2
2. GENERAL STATEMENTS
Technical Support and Service
Headquarters
Mortara Instrument, Inc.
7865 North 86th Street
Milwaukee, WI 53224
U.S.A.
Tel: 414.354.1600
Tel: 800.231.7437
Fax: 414.354.4760
Internet: http://www.mortara.com
European Union
Mortara Instrument Europe, Srl
(European Headquarters)
Via Cimarosa 103/105
40033 Casalecchio di Reno (BO)
Italy
Tel: +39.051.298.7811
Fax: +39.051.613.3582
Service/Technical
Support Group
Mortara Instrument, Inc.
7865 North 86th Street
Milwaukee, WI 53224
U.S.A.
Tel: 414.354.1600
Service: 888.MORTARA
(888.667.8272)
Fax: 414.354.4760
Sales Support/
Supplies & Accessories
Mortara Instrument, Inc.
7865 North 86th Street
Milwaukee, WI 53224
U.S.A.
Tel: 414.354.1600
Fax: 414.354.4760
US Distribution: orderspc.us@Mortara.com
Mortara Instrument Germany
Bonifaciusring 15
45309 Essen
Germany
Tel: +49.201.18 55 69 70
Fax: +49.201.18 55 69 77
Mortara Instrument Netherlands
Postbus 324
5680 AH Best
Industrieweg 160b
5683 CG Best
Netherlands
Tel: +31.499.377310
Fax: +31.499.377908
Mortara Instrument Australia
PO Box 7568
Baulkham Hills NSW 2153
Unit 28, 9 Hoyle Avenue
Castle Hill NSW 2154
Australia
Tel: +61 2 8070 9303
Fax: +61 2 9899 9478
Mortara Instrument UK Ltd
Units 11 & 12, Scion House
Stirling University Innovation Park
Stirling FK9 4NF
Scotland
Tel: +44.1786.444980
Fax: +44.1786.446630
3
3. NOTICES
Manufacturer’s Responsibility
Mortara Instrument, Inc. is responsible for the effects on safety and performance only if:
•Assembly operations, extensions, readjustments, modifications, or repairs are carried out by persons authorized
by Mortara Instrument, Inc.
•The device is used in accordance with the instructions for use.
•The electrical installation of the relevant room complies with the requirements of appropriate regulations.
Responsibility of the Customer
The user of this device is responsible for ensuring the implementation of a satisfactory maintenance schedule.
Failure to do so may cause undue failure and possible health hazards.
Equipment Identification
Mortara Instrument, Inc. equipment is identified by a serial and reference number on the back of the device. Care
should be taken so that these numbers are not defaced.
Copyright and Trademark Notices
This document contains information that is protected by copyright. All rights are reserved. No part of this
document may be photocopied, reproduced, or translated to another language without prior written consent of
Mortara Instrument, Inc.
Other Important Information
The information in this document is subject to change without notice.
Mortara Instrument, Inc. makes no warranty of any kind with regard to this material including, but not limited to,
implied warranties of merchantability and fitness for a particular purpose. Mortara Instrument, Inc. assumes no
responsibility for any errors or omissions that may appear in this document. Mortara Instrument, Inc. makes no
commitment to update or to keep current the information contained in this document.
NOTICES
4
5
4. WARRANTY INFORMATION
Your Mortara Warranty
MORTARA INSTRUMENT, INC. (hereafter referred to as “Mortara”) warrants that components within Mortara
products (hereafter referred to as “Product/s”) will be free from defects in workmanship and materials for the
number of years specified on documentation accompanying the product, or previously agreed to by the purchaser
and Mortara, or if not otherwise noted, for a period of thirteen (13) months from the date of shipment.
Consumable, disposable or single use products such as, but not limited to, PAPER or ELECTRODES are warranted
to be free from defects in workmanship and materials for a period of 90 days from the date of shipment or the date
of first use, whichever is sooner.
Reusable product such as, but not limited to, BATTERIES, BLOOD PRESSURE CUFFS, BLOOD PRESSURE
HOSES, TRANSDUCER CABLES, Y-CABLES, PATIENT CABLES, LEAD WIRES, MAGNETIC STORAGE
MEDIUMS, CARRY CASES or MOUNTS, are warranted to be free from defects in workmanship and materials for
a period of 90 days. This warranty does not apply to damage to the Product/s caused by any or all of the following
circumstances or conditions:
a) Freight damage;
b) Supplies, accessories and internal parts NOT approved by Mortara;
c) Misapplication, misuse, abuse, and/or failure to follow the Product/s instruction sheets and/or information
guides;
d) Accident;
e) A disaster affecting the Product/s;
f) Alterations and/or modifications to the Product/s not authorized by Mortara;
g) Other events outside of Mortara’s reasonable control or not arising under normal operating conditions.
THE REMEDY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT WITHOUT
CHARGE FOR LABOR OR MATERIALS, OR ANY PRODUCT/S FOUND UPON EXAMINATION BY
MORTARA TO HAVE BEEN DEFECTIVE. This remedy shall be conditioned upon receipt of notice by Mortara
of any alleged defects promptly after discovery thereof within the warranty period. Mortara’s obligations under the
foregoing warranty will further be conditioned upon the assumption by the purchaser of the Product/s (i) of all
carrier charges with respect to any Product/s returned to Mortara’s principal place or any other place as specifically
designated by Mortara or an authorized distributor or representative of Mortara, and (ii) all risk of loss in transit. It
is expressly agreed that the liability of Mortara is limited and that Mortara does not function as an insurer. A
purchaser of a Product/s, by its acceptance and purchase thereof, acknowledges and agrees that Mortara is not liable
for loss, harm, or damage due directly or indirectly to an occurrence or consequence there from relating to the
Product/s. If Mortara should be found liable to anyone under any theory (except the expressed warranty set forth
herein) for loss, harm, or damage, the liability of Mortara shall be limited to the lesser of the actual loss, harm, or
damage, or the original purchase price of the Product/s when sold.
WARRANTY INFORMATION
6
EXCEPT AS SET FORTH HEREIN WITH RESPECT TO REIMBURSEMENT OF LABOR CHARGES, A
PURCHASER’S SOLE EXCLUSIVE REMEDY AGAINST MORTARA FOR CLAIMS RELATING TO THE
PRODUCT/S FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE SHALL BE
THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCT/S TO THE EXTENT THAT THE DEFECT IS
NOTICED AND MORTARA IS NOTIFIED WITHIN THE WARRANTY PERIOD. IN NO EVENT,
INCLUDING THE CLAIM FOR NEGLIGENCE, SHALL MORTARA BE LIABLE FOR INCIDENTAL,
SPECIAL, OR CONSEQUENTIAL DAMAGES, OR FOR ANY OTHER LOSS, DAMAGE, OR EXPENSE OF
ANY KIND, INCLUDING LOSS OF PROFITS, WHETHER UNDER TORT, NEGLIGENCE OR STRICT
LIABILITY THEORIES OF LAW, OR OTHERWISE. THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED
WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR
PURPOSE.
7
5. USER SAFETY INFORMATION
Warning: Means there is the possibility of personal injury to you or others.
Caution: Means there is the possibility of damage to the patient monitor.
Note: Provides information to further assist in the use of the device.
NOTE: This manual may contain screen shots and pictures. Any screen shots and pictures are provided
for reference only and are not intended to convey actual operating techniques. Consult the actual screen in
the host language for specific wording.
Warnings and Cautions
Read this manual in full before operating the treadmill.
Before each use of this equipment, check the power receptacle for signs of damage. Do not operate the
equipment if the integrity of these items is in question.
Regularly inspect cables and treadmill belts for wear or damage. Do not operate the equipment if the integrity of
these items is in question.
When connecting auxiliary equipment approved for use with the treadmill, be certain the summation leakage
current does not exceed local or provincial standards.
The treadmill must be on an appropriate, dedicated electrical circuit with a power rating that meets the electrical
specification on the treadmill serial number label. Nothing else should be connected to the circuit.
To avoid potential safety and electrical problems, use parts and accessories that meet Mortara specifications.
Use of accessories or cables other than those specified, with the exception of accessories or cables sold by
Mortara as replacement parts for internal components, may result in increased emissions or decreased immunity
of the treadmill.
This equipment is classified Class I, Type B, ordinary equipment, not protected against fluid ingress. It is rated
for continuous operation.
The CR60 Rehabilitation Treadmill needs special precautions regarding EMC and needs to be installed and put
into service according to the guidelines of the EMC declaration tables.
Portable and mobile RF communications equipment may affect the treadmill and the recommended separation
distances in the EMC declaration tables should be observed.
The treadmill should not be used adjacent to or stacked with other equipment. If adjacent or stacked use is
necessary, the treadmill should be observed to verify normal operation in the configuration in which it will be
used.
Do not operate this equipment in the presence of flammable anesthetic mixtures.
USER SAFETY INFORMATION
8
Increased risk due to leakage current can result if this equipment is not grounded properly.
Failure to follow these guidelines can produce a serious or possibly fatal electrical shock hazard. Consult a
qualified electrician as required.
Do not start the treadmill when someone is standing on the belt.
Keep speed and grade at the lowest settings when getting on and off the treadmill belt.
Never place chairs or other objects on treadmills.
Keep the area underneath and around the treadmill clear. Make sure cables are clear of the treadmill.
Be aware of a moving treadmill belt.
Allow sufficient room for patients to maneuver around the system and to safely mount and dismount the
treadmill.
Ensure the user understands the proper treadmill mount and dismount procedure.
Patient should straddle the treadmill belt or stand on the deck’s edge at start up.
The patient should always face the front of the treadmill when stepping on or off the belt. Do not step onto the
belt while facing the side of the treadmill.
At the end of the test, patient should hold the handrail and step off to the side of the treadmill.
Properly train new staff.
9
6. EQUIPMENT SYMBOLS AND MARKINGS
Symbol Delineation
Your treadmill may display one or more of the following symbols and warning labels for your protection. No single
product displays all.
Attention: Consult accompanying
documents Earth ground (protective)
Off (power disconnected from mains)
Type B equipment – provides adequate protection
against electric shock, particularly regarding
allowable leakage current; reliability of the
protective earth connection (when present)
On (power connected to mains)
Type BF equipment – contains an F-type isolated
patient applied part providing a high degree of
protection against electric shock
Alternating current Type BF equipment with defibrillation protection
High voltage
Type CF equipment – contains an F-type isolated
patient applied part and provides a degree of
protection against electric shock higher than that
for type BF equipment regarding allowable
leakage currents
Earth ground (functional)
Type CF equipment with defibrillation protection
Replace fuse only as marked Fuse
Mains power Equipotentiality
Down Up
Faster Slower
Warning TTimed fuse (slo-blo)
EQUIPMENT SYMBOLS AND MARKINGS
10
Hz Hertz VVolts
AAmperes VA Volt Amperes
Do not dispose as unsorted municipal
waste. Per European Union Directive
2002/96, requires separate handling for
waste disposal according to national
requirements
11
7. GENERAL CARE
Never wipe the deck beneath the belt, even when changing the belt. Wiping can damage the wax finish.
Do not use detergents or cleaning agents on any part of the deck.
Disinfection
If it is necessary to disinfect the treadmill, follow the procedures established by your institution.
Do not use liquids on the deck surface.
Daily
Keep the treadmill free of dust and debris. Clean the exterior and walking belt with a damp sponge; do not soak
surfaces. Dry all surfaces thoroughly.
Weekly
Elevate the treadmill to maximum grade and vacuum the floor under it to prevent excess dust and dirt from
interfering with operation.
Periodic
Depending upon the treadmill environment, dust and or lint can accumulate under the hood. Period internal cleaning
by an authorized technician is recommended (see Service Manual).
Cautions
Turn off the treadmill and unplug the power cord from the wall outlet before cleaning.
Do not let liquid enter the interior of the treadmill. If it does, the equipment must be inspected and tested for
safety by an approved technician before it can be used again.
GENERAL CARE
12
Other manuals for Quinton CR60
1
Table of contents
Other Mortara Treadmill manuals
