Mortuary Lift The Ultimate 1000 Lift User manual

Load Scale
Calibration
Procedure

Instructions on
Calibrating your
Load Scale
NOTE: Your load scale was calibrated prior to shipping to your
location. Only use this procedure if your scale displays wastly in-
-
stallation, prior to bearing a load, with Glidetec Straps attached.
BEFORE YOU BEGIN: Please read through the procedure. you
-
chines having a pivot. If you do not have a pivot you will need a
-
ter and at least 3 inches long (like an unsharpened pencil). You


1. 

on the back of the unit.

2. With the display head turned
off, press the calibration
button with the allen wrench.
While still holding the button
down, turn the unit back on.



ENTER.

does not display 1 please use the arrow keys to set it to 1.
Press ENTER.

You will need your calibration weight for this step. DO NOT

 
ENTER.




Press ENTER.





ENTER.

calibration did not work and you will need to repeat the

when pressing enter on last step.)

Press ENTER.


11. With Glidetec straps attached press ZERO on the display.


calibration.


NOTE: 
