Mosaic FSMVPT2069 Owner's manual

Steel Mesh Swivel Rocker
FSMVPT2069
Customer Service: [phone], 7:00 m to 12:00 m Everyd y CST
Live Ch t @ Ac demy.com: 24/7
M de in Chin
Ple se keep this instruction m nu l for future reference
Assembly Instructions & User’s M nu l

T ble of Contents
Page 1 of 8
Note: Before beginning assembly of pro uct, make sure
all parts are present. Compare parts with package content
list an har ware contents above. If any part is missing or
amage o not attempt to assemble the unit. Contact
customer service for replacement parts.
Warnings………………………………………………………………..…2
Tools an Parts…………………………………………………………...2
Assembly Instructions…………………………………………………....4
Care an Maintenance……………………………………………...……7
Warranty Information………………………………………....................8

W rnings
Page 2 of 8
This pro uct requires a ult assembly. Keep screws an parts away from chil ren.
Please rea this manual before assembly or use.
Do not tighten nuts or screws until assembly is complete.
Before assembly, check the package contents carefully to ensure that all parts are inclu e .
For missing or replacement parts, contact customer service at [phone].
SKU#: 102689857 Style#: FSMVPT2069
1 Wrench
2 Allen wrench
Tools Required (Included)

P rts List
H rdw re
A Right Arm 2
B Left Arm 2
C Chair Seat 2
D Chair Back 2
E Base 2
F T-type Connector 2
G Steel Plate 4
H M6 x 35mm Bolt 16
I M8 x 30mm Bolt 8
J M6 Washer 16
K M8 Washer 16
L M8 Nut 8
M M6 Bolt Cap 16
N M8 Nut Cap 8
O M8 Bolt Cap 8
Page 3 of 8

Assembly Instructions
Step 1:
Attach chair seat (C) to right arm (A)
an left arm (B) at position 1 & 2 & 3
an 4, using bolt 4X(H) an M6
washer 4X(J).
Attach the chair back (D) to right arm
(A) an left arm (B) at position 5 & 6 &
7 an 8, using bolt 4X(H) an M6
washer 4X(J).
Tighten these bolts using the inclu e
Allen wrench (Q), then cover them with
M6 En caps 8X(M).
NOTE: Insert the bolt an washer from
the chair seat/chair back to the
right/left arms.
Page 4 of 8

Assembly Instructions
Step 2:
When ssembling the ch ir, m ke
sure the direction of the rrow is
tow rds the b ck of the ch ir.
Attach T-type connector (F) to the
bottom of chair seat (C) as shown.
Insert the bolt 4X(I) an washer 4X(K)
from chair seat (C) to T-type connector,
an a steel plate (G), M8 washer 4X(K)
an M8 Nut 4X(L) as shown.
Tighten bolts an nuts using the
inclu e wrench (P). You may nee
extra a justment with the wrench in this
step.
Cover bolts with M8 bolt en caps
4X(O), nuts with M8 nut en caps
4X(N).
NOTE: Please make sure both arrows
in chair seat an T-type connector are
keep in the same irection before
assembling.
Page 5 of 8

Assembly Instructions
Step 5:
Insert the upper part of the chair all the
way into the base (E).
Repeat all steps to assemble the secon
swivel rocker.
Your swivel rocker is now rea y to
use.
Page 6 of 8

C re nd M inten nce
Page 7 of 8
The pro uct shoul be cleane on a regular basis to promote safe use an prolong pro uct
life.
Wipe the frame with a smooth amp cloth an air ry.
Do not use abrasive cleaners as they may amage or scratch the surface paint.
Do not leave this pro uct in harsh weather con itions for exten e perio s.
For exten e life, the pro uct shoul be store in oors or covere uring prolonge perio s
of non-use.
Storing in a ry location will help prevent rust.

W rr nty Inform tion
Page 8 of 8
The appliance has been manufacture un er the highest
stan ar s of quality an workmanship. We warrant to the
original consumer purchaser that all aspects of this pro uct will
be free of efects in material an workmanship for one year
from the ate of purchase. A replacement for any efective
part will be supplie free of charge for installation by the
consumer. Defects or amage cause by the use of other then
genuine parts are not covere by this warranty. This warranty
shall be effective from the ate of purchase as shown in the
purchaser receipt.
This warranty is vali for the original consumer purchaser only
an exclu es in ustrial, commercial or business use of the
pro uct, pro uct amage ue to shipment or failure which
results from alteration, pro uct abuse, or pro uct misuse,
whether performe by a contractor , service company , or
consumer. We will not be responsible for labor charges an /or
amage incurre in installation, repair or replacement nor for
inci ental or consequential amage.