Mosaic Beringer 164256 Owner's manual

Please keep this instruction manual for future reference
Assembly Instructions & User’s
Manual
Beringer 6 Piece Dining Set
164256
Customer Service: [phone]
7:00 am to 12:00 am CST (daily)
Live Chat at: www.academy.com
Email: [e-mail]
----------------------OR--------------------
[phone] 8:30am to 5:30pm Monday thru Friday, EST
(Made in China)

Page 1 of 10
Table of Contents
Warnings………………………………………………………………..… 2
Parts List ……………………………………………………………..… 3
Assembly Instructions-Bench………………………………...….….. 4-6
Assembly Instructions-Table………………………………...….….. 7-8
Care and Maintenance……………………………………………...…. 9
Warranty Information………………..…….........................................10
Note: Before beginning assembly of product, make sure all
parts are present. Compare parts with package content list
and contents on next page. If any part is missing or
damaged do not attempt to assemble the unit. Contact
customer service for replacement parts.
Sku:125938262
Style#: 164256

Warnings
Page 2 of 10
•Please do not exceed the weight limitations
oWeight Limit Table: 300 Lbs
oWeight Limit Chair: 300 Lbs
oWeight Limit Bench: 250 Lbs per seat
•Keep all children and pets away from assembly area
•DO NOT stand or allow children to stand on the
assembled product
•To avoid injuries, use care when assembling bench
and table

Parts List
Page 3 of 10

Assembly Instructions-Bench
Step 1:
Align the steel panel(C and D) to the leg (B).
Step 2:
Secure the steel panel(C and D) to the leg(B) with
washers (DD) and bolts (BB) using the allen key
(EE).
Page 4 of 10

Assembly Instructions-Bench
Step 3:
Turn over the seat panel, align the leg(B) to the
seat(A).
Step 4:
(1)Secure the leg(B) to the seat(A) with washers
(DD) and bolts (BB) using the allen key (EE).
(2)Fully tighten all bolts (BB) once all bolts (BB)
are in place. Cover all bolts with bolt caps (AA).
Page 5 of 10

Assembly Instructions-Bench
Step 5:
(1)Secure the leg(B) to the seat(A) with washers
(DD) and bolts (CC) using the allen key (EE).
(2)Fully tighten all bolts (CC) once all bolts (CC)
are in place. Cover all bolts with bolt caps (AA).
Step 6:
Turn the table upright, fasten the seat cushion and
seat tube with tie.
Page 6 of 10

Assembly Instructions-Table
Step 1:
Turn over the table top, align the table leg(G) to the
table top(F).
Step 2:
(1)Secure the table leg(G) to the table top(F) with
washers (DD) and bolts (BB) using the allen key
(EE).
(2)Fully tighten all bolts (BB) once all bolts (BB)
are in place. Cover all bolts with bolt caps (AA).
Page 7 of 10

Assembly Instructions-Table
Step 3:
Turn the table upright, level the table with glides at
the bottom of the table legs.
Page 8 of 10

Page 9 of 10
Care and Maintenance
This patio set should be cleaned on a regular basis to
promote safe use and prolong product life.
Wipe the frame with a smooth damp cloth and air dry.
Do not use abrasive cleaners as they may damage or
scratch the surface paint. Do not leave this product in severe
weather conditions for extended periods. For extended life,
the patio set should be stored indoors or covered during
prolonged periods of non-use. Storing in a dry location will
help prevent rust.

Page 10 of 10
Warranty Information
This product has been manufactured under the highest
standards of quality and workmanship. We warrant to the
original consumer purchaser that all aspects of this product will
be free of defects in material and workmanship for one year
from the date of purchase. A replacement for any defective
part will be supplied free of charge for installation by the
consumer. Defects or damage caused by the use of other than
genuine parts are not covered by this warranty. This warranty
shall be effective from the date of purchase as shown in the
purchaser receipt.
This warranty is valid for the original consumer purchaser only
and excludes industrial, commercial or business use of the
product, product damage due to shipment or failure which
results from alteration, product abuse, or product misuse,
whether performed by a contractor , service company , or
consumer. We will not be responsible for labor charges and/or
damage incurred in installation, repair or replacement nor for
incidental or consequential damage.