Mosaic Ivy Bench User manual

1
THIS PRODUCT CONTAINS ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA
TO CAUSE CANCER AND/OR BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.
WARNING!
Adult assembly required.
Keep screws and small parts out of reach of children.
WARNING：
or (1-855) 242-7255,
FSMVPT2048
Ivy Bench

2
Warnings 3
Tools Required 4
Assembly Instructions 6
Care and Maintenance 3
Warranty Information 4
Hardware 5
Table Of Contents
Parts List 5

3
This bench requires adult assembly. Keep screws and parts away from children.
Please read this manual before assembly or use.
Do not tighten nuts or screws until assembly is complete.
Before assembly, check the package contents carefully to ensure that all parts are included.
For missing or replacement parts, contact customer service at [phone] or (1-855) 242-7255.
Sku#: 0264-41367-0027-000-0000
Style#: FSMVPT2048
Weight limit: 500 LBS
The bench should be cleaned on a regular basis to promote safe use and prolong product life.
Wipe the frame with a smooth damp cloth and air dry.
Do not use abrasive cleaners as they may damage or scratch the surface paint.
Do not leave this product in harsh weather conditions for extended periods.
For extended life, the bench should be stored indoors or covered during prolonged periods
of non-use.
Storing in a dry location will help prevent rust.

4
Limited Warranty
Frame is under warranty from defects for a period of one (1) year.
Wrench
Allen wrench
J
K

5
Right Leg
Left Leg
Bench Seat
Bench Back
70mm Bolt
50mm Bolt
Hexagonal Nut
Washer
End Cap

6
A
D
CB
C
F
B
IGHE
Step 1:
Attach the bench back(D) to the left
leg(B) using two 70mm bolts(E), two
washers(H) and two hexagonal nuts
(G).
Repeat this step to attach the bench
back to the right leg(A).
Hand tighten only.
Step 2:
Attach the bench seat(C)to the left leg
(B) using two 50mm bolts(F), two
washers(H) and two hexagonal nuts
(G).
Repeat this step to attach the bench
seat to the right leg(A).
Hand tighten only.
Step 3:
Make sure the bench stands level and
straight (90°) to the floor.
Tighten all hexagonal nuts and bolts
using the included wrench(J) and
Allen wrench(K).
Cover all nuts by end caps(I).
The bench is now ready to use.
D