motif Duo User manual

1. Buttons & Features
Motif Duo® Quick Guide
LCD Screen
A Memory
B Timer
C Expression
D Power
E Battery
F Massage
G Vacuum
H Power Button
I Decrease Button
J Increase Button
K Mode Button
Assembling The Duo Pump
2. Preparing The Duo Pump
1. Wash hands before touching breast pump
components.
2. Place the diaphragm downward onto the
diaphragm bottom, so that the cross-lined
surface is facing the diaphragm bottom.
Cover with the diaphragm top and turn it
to lock.
3. Place the breast shield in the breast shield
connector.
4. Connect the valve by placing it in the
bottom of the breast shield connector.
Screw the bottle into the breast shield
connector.
5. Twist the diaphragm assembly onto the top
of the breastshield connector.
6. Connect the tubing to the port to the main
body of the pump.
7. Connect the other end of the tubing to
the back of the diaphragm assembly by
inserting the tip of the diaphragm top into
the tubing.
8. To clean or store after use unscrew the
bottle from the breast shield connector
and cover. Remove tubing from diaphragm
assembly and pump. Twist the diaphragm
assembly off of the breast shield connector.
Remove the breast shield from the breast
shield connector. Following cleaning
instructions on breast pump parts after
each use.
Breast Shield
Connector
Valve
Button Control
EA
B
C F
G
D
J
H
I
K
Diaphragm
Tubing

3. Using The Duo
How To Use The Dual Pump
Single-Pump Mode
When changing back to
Single-Pump mode make
sure to cover the air flow
port with the plug.
Double-Pump Mode
To use the Duo in
Double-Pump mode
remove the plug from the
air flow port and connect
the tube from the extra
collection kit.
Turning On/Off The Duo Pump
1. Press the Power button. The device will power ON, indicated by the LCD screen lighting up.
The Duo will begin in Massage Mode to help with faster letdown.
2. Press the Mode button. This will change the pump to Expression Mode once your milk
starts flowing.
3. Adjust suction to preferred comfort level.
4. Use your breast pump with a fully charged battery whenever possible. Prior to initial use,
plug the device into the power adapter and allow the breast pump to charge fully. The battery
charge level displayed on the LCD screen can differ from the actual battery capacity. Charge
the battery immediately when [Lo Bt] is displayed on the LCD screen. If the breast pump
remains unused for a long period of time, make sure that the battery is fully charged before
use. Unplug the power adapter from the breast pump immediately after you are finished
charging your device..
4. Warnings & Precautions
Warning: Potentially dangerous situation that could result in serious injury.
Caution: A possibly dangerous situation that could result in slight bodily injury.
Manufactured for:
Motif Medical®, LLC
8 The Green, Suite 5601
Dover, DE 19901
Phone: [phone]
Email: [email protected]
Web: www.motifmedical.com
Using Memory Mode
1. Press the Power button for 2 seconds to activate the Memory function. The Memory icon will
start flashing, and the pump will start recording your pumping session.
2. Adjust the settings during your pumping session as best suits you.
3. Press the Power button for another 2 seconds to stop recording. The Memory icon in the
screen shows that your program has been stored.
4. To play your pumping program, press the Decrease button (the same button you press to
decrease vacuum intensity) for 2 seconds.