Motorola DC600 Instruction Manual

START HERE>
COMMENCEZ ICI>
INICIO>
Bluetooth® Wireless Adapter
Casque sans fil Bluetooth®
Auricular inalámbrico Bluetooth®
Wireless_adapterUG_ALL.book Page 1 Wednesday, April 28, 2004 5:55 PM

Wireless_adapterUG_ALL.book Page 2 Wednesday, April 28, 2004 5:55 PM

1
Welcome
The Motorola Bluetooth
®
adapter is astonishingly
advanced and simple to use. Although you are no
longer connected by wires, you are connected to a
growing group of leading-edge technology pioneers
who are embracing the global Bluetooth movement.
Motorola is actively creating Bluetooth solutions for
work, play, home, life–everywhere around the globe.
Thank you for choosing the Motorola Wireless
Bluetooth Adapter!
6809481A68-A
Wireless_adapterUG_ALL.book Page 1 Wednesday, April 28, 2004 5:55 PM

Contents
2
Contents
Safety and General Information . . . . . . . . . . . . . 3
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
What Is Bluetooth Wireless Technology? . . . 9
Wireless Adapter Features . . . . . . . . . . . . . 10
Using Your Wireless Adapter . . . . . . . . . . . . . . 12
Quick Installation . . . . . . . . . . . . . . . . . . . . . 12
Pairing with your Bluetooth Audio Device . . 13
Using the Wireless Adapter with a
Bluetooth Audio Device . . . . . . . . . . . . . . . . 15
Using the Wireless Adapter with your
Bluetooth enabled PDA or Computer . . . . . 18
Charging Your Phone with the
Wireless Adapter Attached . . . . . . . . . . . . . 21
Removing the Wireless Adapter from your
Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Wireless_adapterUG_ALL.book Page 2 Wednesday, April 28, 2004 5:55 PM

3
Safety and General
Information
IMPORTANT INFORMATION ON SAFE AND
EFFICIENT OPERATION. READ THIS
INFORMATION BEFORE USING YOUR
DEVICE.
Users are not permitted to make changes or modify
the device in any way. Changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment. See 47 CFR Sec. 15.21.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation. See 47 CFR Sec. 15.19(3).
Wireless_adapterUG_ALL.book Page 3 Wednesday, April 28, 2004 5:55 PM

Safety and General Information
4
Electromagnetic Interference/
Compatibility
Note: Nearly every electronic device is susceptible
to Electromagnetic Interference (EMI) if
inadequately shielded, designed, or otherwise
configured for electromagnetic compatibility.
Facilities
To avoid EMI and/or compatibility conflicts, turn off
your device in any facility where posted notices
instruct you to do so. Hospitals or health care
facilities may be using equipment that is sensitive to
external RF energy.
Wireless_adapterUG_ALL.book Page 4 Wednesday, April 28, 2004 5:55 PM

5
Safety and General Information
Aircraft
When instructed to do so, turn off your device when
on board an aircraft. Any use of a device must be in
accordance with applicable regulations per airline
crew instructions.
Medical Devices
Hearing Aids
Some devices may interfere with some hearing aids.
In the event of such interference, you may want to
consult with your hearing aid manufacturer to
discuss alternatives.
Other Medical Devices
If you use any other personal medical device,
consult the manufacturer of your device to
determine if it is adequately shielded from RF
energy. Your physician may be able to assist you in
obtaining this information.
Wireless_adapterUG_ALL.book Page 5 Wednesday, April 28, 2004 5:55 PM

Safety and General Information
6
Industry Canada Notice to Users
Operation is subject to the following two conditions:
(1) This device may not cause interference and (2)
This device must accept any interference, including
interference that may cause undesired operation of
the device. See Ref IC RSS 210 Sec. 5.11. The
term “IC” before the certification/registration number
signifies only that registration was performed based
on a Declaration of Conformity indicating that
Industry Canada technical specifications were met.
It does not imply that Industry Canada approved the
equipment. See Ref IC Self-Marking 6(f) and
RSP-100 Sec. 4.
Wireless_adapterUG_ALL.book Page 6 Wednesday, April 28, 2004 5:55 PM

7
Safety and General Information
FCC Notice to Users
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
Wireless_adapterUG_ALL.book Page 7 Wednesday, April 28, 2004 5:55 PM

Safety and General Information
8
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and the receiver.
• Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Wireless_adapterUG_ALL.book Page 8 Wednesday, April 28, 2004 5:55 PM

9
Introduction
What Is Bluetooth Wireless
Technology?
Bluetooth wireless technology propels you into a
new dimension in connectivity.
Bluetooth devices communicate without wires,
using built-in radio transceivers that operate on a
globally available radio frequency to ensure
worldwide compatibility. Your Bluetooth Wireless
Adapter can communicate with other
Bluetooth devices within a range of approximately
10 meters (33 feet).
Wireless_adapterUG_ALL.book Page 9 Wednesday, April 28, 2004 5:55 PM

Introduction
10
Wireless Adapter Features
032466o
Audio Jack Plug
Phone Connector
Paring Button
LED Indicators
Charger Connector
Audio Jack Plug
Phone Connector
LED Indicators
Panning Button
Charger Connector
Wireless_adapterUG_ALL.book Page 10 Wednesday, April 28, 2004 5:55 PM

11
Introduction
Audio Jack Plug - Plugs in to your phone’s
headset jack.
Phone Connector - Connects to your phone.
Paring Button - Allows your phone to connect to
another Bluetooth device.
LED Indicators - Provide visual indication about
Wireless Adapter status.
Charging Connector - Plug the charger in here to
power your phone or charge the wireless phone’s
battery.
Note: Your Wireless Adapter is powered by
your Phone’s battery.
Wireless_adapterUG_ALL.book Page 11 Wednesday, April 28, 2004 5:55 PM

12
Using Your Wireless Adapter
Quick Installation
Both blue LED indicators light up during
initialization.
When both LED indicators turn off, initialization is
complete.
You are ready to pair the Wireless Adapter to a
Motorola Bluetooth Audio Device such as a wireless
Action
1 Insert the Wireless Adapter into phone.
2 Plug the audio cable into the headset jack on
your phone.
Wireless_adapterUG_ALL.book Page 12 Wednesday, April 28, 2004 5:55 PM

13
Using Your Wireless Adapter
headset or a portable wireless speaker. You can
also pair the adapter to a data device such as a
Bluetooth enabled computer or PDA.
Pairing with your Bluetooth
Audio Device
You must pair your Wireless Adapter with your
Bluetooth audio device before using the audio
device with the Wireless Adapter. This needs to be
done once for each Bluetooth audio device that is
paired with the Wireless Adapter. Read your
Bluetooth audio device user’s guide for pairing and
operating instructions.
Wireless_adapterUG_ALL.book Page 13 Wednesday, April 28, 2004 5:55 PM

Using Your Wireless Adapter
14
Pairing
With the Wireless Adapter and a Bluetooth audio
device in close proximity:
When the Wireless Adapter has successfully paired
with the Bluetooth audio device, both LED indicators
will rapidly flash 10 times. The Bluetooth audio
device will also indicate that successful pairing was
accomplished.
Action
1 Turn on your Bluetooth audio device and start
pairing mode.
2 Press and hold the pairing button. When the right
LED indicator lights up, continue holding the
button until both LED indicators light up.
This puts the Wireless Adapter into pairing
mode, allowing it to find other Bluetooth devices.
Wireless_adapterUG_ALL.book Page 14 Wednesday, April 28, 2004 5:55 PM

15
Using Your Wireless Adapter
The Wireless Adapter is compatible with Bluetooth
audio devices with pass key numbers "0000" and
"1234".
Using the Wireless Adapter with
a Bluetooth Audio Device
When your Bluetooth audio device is turned on and
paired with the Wireless Adapter, the Wireless
Adapter's two LED indicators flash together to show
that the Bluetooth audio device is connected to the
Wireless Adapter.
You are now ready to place a call. Now, all audio is
routed to your Bluetooth audio device rather than to
the phone’s ear piece. As you are placing the call
you should hear the keypad presses through your
Bluetooth audio device.
When you are on a call, the LED indicators flash
alternately.
Wireless_adapterUG_ALL.book Page 15 Wednesday, April 28, 2004 5:55 PM

Using Your Wireless Adapter
16
You can also answer and hangup a call with your
Bluetooth audio device.
Pressing the button on the Bluetooth audio device
has the following effects:
• When the phone is not on a call, a short button
press displays the last number dialed on the
phone. A second short button press within
15 seconds will then dial that number.
• When there is an incoming call and the phone
is ringing, a short button press answers the call.
• When the phone is on a call, a long button
press ends the call.
Note: On some Bluetooth audio devices two short
button presses are substituted for a long button
press. The Wireless Adapter does not support
3-way calling or voice dial from the multifunction
button. Disable voice dial in the Headset menu in
Settings.
Wireless_adapterUG_ALL.book Page 16 Wednesday, April 28, 2004 5:55 PM

17
Using Your Wireless Adapter
Wireless Adapter LED Indicators
Indicators Description
on (steady) Wireless Adapter is in
pairing mode and looking
for other Bluetooth
devices.
Quick alternate flashes Wireless Adapter is in
paring mode and can be
found by other Bluetooth
devices.
Flashing rapidly
ten times Wireless Adapter pairing was successful.
Wireless_adapterUG_ALL.book Page 17 Wednesday, April 28, 2004 5:55 PM

Using Your Wireless Adapter
18
Using the Wireless Adapter with
your Bluetooth enabled PDA or
Computer
You must pair the Wireless Adapter with your
Bluetooth enabled computer or PDA before using
the computer or PDA with the Wireless Adapter.
This needs to be done only once for each computer
or PDA that is paired with the Wireless Adapter.
Only one computer or PDA can be used at a time,
Flashing together every
three seconds Wireless adapter is in standby mode.
Flashing alternately
smoothly Wireless Adapter is on a call.
Indicators Description
Wireless_adapterUG_ALL.book Page 18 Wednesday, April 28, 2004 5:55 PM