Motorola DS9208 Owner's manual

Programming Your Motorola DS9208 Omni Directional
Barcode Scanner
1
1-866-468-5767 International Point of Sale
201-928-0222 555 Cedar Lane Teaneck,
Our Store Site New Jersey 07666

This document will show you how to program your Motorola DS9208 Omni Directional Barcode
Scanner to read barcodes the way they are formatted in your Corner Store POS database.
Most of your products have UPC-A barcodes that have 12 digits with 10 digits in the middle,
one in the front and one at the end. Here’s an example:
Other products have UPC-E barcodes that have 8 digits with 6 in the middle, one in the front
(usually a zero) and one at the end. Here’s an example:
2
1-866-468-5767 International Point of Sale
201-928-0222 555 Cedar Lane Teaneck,
Our Store Site New Jersey 07666

All of these codes and more are found in the Motorola DS9208 Omni Directional Barcode
Scanner user manual found here:
http://juta-soft.hu/pdf/pultszkenner/DS9208%20felhasznaloi%20kezikonyv.pdf
Reset to factory defaults (usually not necessary)
Carriage Return (simulates Enter key) - Use this if when you scan a barcode, you have to press
enter to get the item # onto the invoice grid
3
1-866-468-5767 International Point of Sale
201-928-0222 555 Cedar Lane Teaneck,
Our Store Site New Jersey 07666

UPC-A
Transmit the first digit
Remove the first digit
Transmit the last digit
Remove the last digit
4
1-866-468-5767 International Point of Sale
201-928-0222 555 Cedar Lane Teaneck,
Our Store Site New Jersey 07666

UPC-E
Transmit the first digit
Remove the first digit
Transmit the last digit
Remove the last digit
5
1-866-468-5767 International Point of Sale
201-928-0222 555 Cedar Lane Teaneck,
Our Store Site New Jersey 07666