Motorola MD7250 User manual

E52 Series
Expandable Cordless Telephone System
5.8 GHz Digital
Model Family: MD7250
Users Guide

For a copy of a large-print version of this guide, or for
product-related questions, please visit us online:
www.motorola.com/cordless
Or contact us at:
1-800-353-2729 U.S.A.
1-800-461-4575 Canada
1-888-390-6456 TTY (Text Telephone)
Motorola reserves the right to revise this publication and to make changes in content from time to time
without obligation on the part of Motorola to provide notification of such revision or change.
MOTOROLA PROVIDES THIS GUIDE WITHOUT WARRANTY OF ANY KIND, EITHER IMPLIED OR
EXPRESS, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. Motorola may make improvements or changes in the
product(s) described in this manual at any time.
MOTOROLA and the Stylized M logo are registered in the U.S. Patent and Trademark Office. All other
product or service names are the property of their respective owners.
© Motorola, Inc. 2006

MD7250 User Guide
i
Table of Contents
FCC Information........................................................................................................................... iv
Important Safety Instructions .................................................................................................. viii
Welcome ....................................................................................................................................... 1
Handset Overview ................................................................................................................. 2
Base Unit Overview ............................................................................................................... 3
Getting Started............................................................................................................................. 4
Battery Safety Instructions.....................................................................................................4
Installing the Battery .............................................................................................................. 5
Charging the Handset Battery................................................................................................ 6
Installing the Base Unit................................................................................................................ 7
Basic Operations........................................................................................................................... 9
Handset Indicators ................................................................................................................. 9
Base Unit LEDs...................................................................................................................... 9
Making a Call........................................................................................................................ 10
Answering Calls ................................................................................................................... 10
Ending a Call ........................................................................................................................ 10

MD7250 User Guide
ii
Speakerphone Operation ..................................................................................................... 10
Adjust Handset Volume ....................................................................................................... 11
Redial Function .................................................................................................................... 11
Mute Function...................................................................................................................... 11
Setting the Date and Time ................................................................................................... 12
Locate a Misplaced Handset................................................................................................ 12
Display Language................................................................................................................. 13
Customizing Your Handset........................................................................................................14
Ringer Volume ..................................................................................................................... 14
Ringer Tone.......................................................................................................................... 14
Setting the Intercom Tone ...................................................................................................15
Naming Your Handset.......................................................................................................... 15
Key Tone .............................................................................................................................. 15
Setting the Auto Answer Feature ........................................................................................ 16
Customizing Your Base Unit ..................................................................................................... 17
Dialing Method..................................................................................................................... 17
Deregister Handset..............................................................................................................17

MD7250 User Guide
iii
Phonebook Operations .............................................................................................................. 18
Storing a New Entry.............................................................................................................18
Reviewing/Dialing from the Phonebook...............................................................................20
Editing a Phonebook Entry...................................................................................................20
Delete a Single Phonebook Entry.........................................................................................21
Caller ID/Call Waiting Caller ID............................................................................................. 21
Reviewing Caller ID Records................................................................................................ 22
Storing a Caller ID Entry in the Phonebook .......................................................................... 23
Dialing from the Caller ID Log .............................................................................................. 24
Deleting a Caller ID Record .................................................................................................. 24
Special Features ......................................................................................................................... 25
Placing an Intercom Call....................................................................................................... 25
Call Transfer ......................................................................................................................... 26
Registering a New Handset .................................................................................................26
In Case of Difficulty .................................................................................................................... 27
Warranty ..................................................................................................................................... 29

MD7250 User Guide
iv
FCC Information
FCC Compliance Class B Digital Device
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by Motorola for compliance could
void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

MD7250 User Guide
v
FCC Declaration of Conformity
Motorola, Inc., Connected Home Solutions, 101 Tournament Drive, Horsham, PA 19044,
1-215-323-1000, declares that this cordless phone complies with 47 CFR Parts 2 and 15 of the
FCC Rules as Class B digital devices.
Canadian Compliance
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la
classe B est conforme á la norme NMB-003 du Canada.
Federal Communications Commission (FCC) Part 68
Statement
This Motorola cordless phone complies with Part 68 of the FCC rules and the requirements
adopted by the Administrative Council for Terminal Attachments (ACTA). On the bottom of this
equipment is a label that contains, among other information, a product identifier in format US:
AAAEQ##TXXXX. If requested, this information must be provided to the telephone company.
The Ringer Equivalence Number (REN) is used to determine the number of devices that may be
connected to the telephone line. Excessive RENs on the telephone line may result in the devices
not ringing in response to an incoming call. In most, but not all areas, the sum of the RENs
should not exceed five (5.0). To be certain of the number of devices that may be connected to
the line, as determined by the total RENs, contact the telephone company.
For products approved after July 23, 2001, the REN for this product is part of the product
identifier that has the format US: AAAEQ##TXXXX. The digits represented by ## are the REN

MD7250 User Guide
vi
without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately
shown on the label.
This equipment uses the following USOC jack: RJ11C. A plug and jack used to connect this
equipment to the premise’s wiring and telephone network must comply with the applicable FCC
Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular
plug is provided with this product. It is designed to be connected to a compatible modular jack
that is also compliant. See installation instructions for details.
Connection to Party Line Service is subject to state tariffs. Contact the state public utility
commission, public service commission, or corporation commission for information. If this
equipment causes harm to the telephone network, the telephone company will notify you in
advance that the temporary discontinuance of services may be required. If advance notice is not
practical, the telephone company will notify the customer as soon as possible. Also, you will be
advised of your right to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations, or procedures
that could affect the operation of the equipment. If this happens, the telephone company will
provide advance notice in order for you to make necessary modifications to maintain
uninterrupted service.
If trouble is experienced with this equipment, for repair or warranty information, please contact
Motorola, Inc. at 1-877-466-8646. If the equipment is causing harm to the telephone network, the
telephone company may request that you disconnect the equipment from the network until the
problem is solved.
This equipment is hearing aid compatible.

MD7250 User Guide
vii
If your home has specially wired alarm equipment connected to the telephone line, ensure the
installation of the cordless phone does not disable your alarm equipment. If you have questions
about what will disable alarm equipment, consult your telephone company or a qualified installer.
CAUTION: To maintain compliance with the FCC's RF exposure guidelines place the base unit at
least 20 cm (approximately one foot) from nearby persons.
For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines
when used with the belt clip supplied or designated for this product. Use of other accessories
may not ensure compliance with FCC RF exposure guidelines.
Industry Canada CS-03 Declaration of Conformity
This product meets the applicable Industry Canada technical specifications. The Ringer
Equivalence Number (REN) is an indication of the maximum number of devices allowed to be
connected to a telephone interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the sum of the RENs of all the
devices does not exceed five.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment on and off, the user is encouraged to try to correct the
interference with one or more of the following measures: Reorient or relocate the receiving
antenna (that is, the antenna for the radio or television that is "receiving" the interference).
Reorient or relocate and increase the separation.

MD7250 User Guide
viii
Important Safety Instructions
When using your telephone equipment, basic safety precautions should always be followed
to reduce the risk of fire, electric shock, and injury, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water (for example, near a bathtub, kitchen sink, or
swimming pool).
5. Do not place this product on an unstable surface, such as a table, shelf, or stand. The
product may fall, causing serious damage.
6. Slots and openings in the back or bottom of the base unit and handset are provided
for ventilation. To protect them from overheating, these openings must not be
blocked by placing the product on a soft surface such as a bed, sofa, or rug. This
product should never be placed near or over a radiator or heat register. This product
should not be placed in any area where proper ventilation is not provided.
7. This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply in your home, consult
your dealer or local power company.
8. Do not allow anything to rest on the power cord. Do not install this product where the
cord may have anyone walking on it.