Motorola CPEI 150 series User manual

User Manual
User Manual
CPEi150
Series

68P09291A19-C i
APR 2009
Table
of
Contents
Contents
Chapter 1: Desktop CPEi150 User Guide Overview Information
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Chapter 2: Installation
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Chapter 3: Basic Configuration
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Chapter 4: Advanced Configuration
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Chapter 5: Configuring TCP/IP
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Chapter 6: Troubleshooting
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Chapter 7: Important Safety and Legal Information
Important Safety and Legal Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
Caring for the Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
CMM Disclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5
Copyrights and Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6

ii 68P09291A19-C
APR 2009

68P09291A19-C 1-1
APR 2009
Chapter
1
Chapter 1: Desktop CPEi150 User Guide
Overview Information

1-2 68P09291A19-C
APR 2009
noitamrofnIweivrevOediuGresU051iEPCpotkseD1
Overview
Thank you for purchasing the Motorola CPE Indoor (CPEi) 150 desktop device. The
Desktop CPE allows you to connect to the wireless world easily and seamlessly without
complicated installation and setup procedures.
The Desktop CPE device provides the user:
• Convenience — with easy plug and play functionality. Flexible connectivity.
Compact design.
• Performance — dual integrated antennas, optimized for rich indoor multipath
environments. Best in Class Radio Performance. Reliable indoor coverage. High
throughput.
• Control — remote management capability allows easy detection and authentication
once the unit is setup. Robust security.
Figure 1-1: CPEi150 Unit
This product is subject to change. Not all features described in this WiMAX CPEi150
User’s Guide are available on all models.

68P09291A19-C 1-3
APR 2009
1noitamrofnIweivrevOediuGresU051iEPCpotkseD
For the most recent documentation, visit the Product Documentation page on
www.motorola.com.
Powerful Features in a Single Unit
The CPE device provides the following features:
• WiMAX Authentication
• WAN DHCP Client
• LAN DHCP Server
• Router Functions
• Firewall Protection
• Port Forwarding
Front of CPE
The CPE unit contains an LED indicator at the top of the unit. The LEDs provide the
status of the unit and signal strength for easy adjustment during setup.
Side Panel
The side panel of the unit contains the Ethernet Port, the Power Connection Port, and a
Ethernet Port LED.
Table 1-1 LED Indicator Interface
Item Description
:erasDELehTsutatSrewoP
• On - power to the CPE is on.
• Off - power to the CPE is off.
siEPCehtnehwsehsalfDELretnecehTsutatSgnizilaitinI
initializing.
langislluf,tilerarabehtnosDELllafI•htgnertSlangiS
is being received.
• If all LEDs are off, the CPE is
unplugged.
• LEDs will display a chase pattern when
the device is attempting to locate and
connect to the network.
There is no reset button on this CPE unit. If you want to reset the CPE, pull
out the power cord and plug it in again.
NOTE

1-4 68P09291A19-C
APR 2009
noitamrofnIweivrevOediuGresU051iEPCpotkseD1
Figure 1-2: CPEi150 Side Panel
Operating Information
Operating temperature for this unit is 0-40ºC (32-104ºF)
AC Power Rating for this unit is:
• 110 ~ 240 AC
Table 1-2 Port Descriptions
Side Panel Ports Description
troPtenrehtEtenrehtE
rotcennoCrewoPCArewoP
:siDELehTDELtenrehtE
• On - Ethernet Port is connected.
• Off - Ethernet Port is not connected.
• Blinking in 5-10 second intervals - the
Ethernet cable is not connected to the
computer.

68P09291A19-C 2-1
APR 2009
Chapter
2
Chapter 2: Installation

2-2 68P09291A19-C
APR 2009
2 Installation
Overview
To connect the CPEi150, you need to review the following sections:
• What’s in the box?
• Easy Setup
What’s in the Box?
Before you begin installation, check that you have received the following items with
your CPE:
Easy Setup
Perform the following tasks before attaching the power cord or powering up the unit:
• Rotate the base of the CPE to be in a perpendicular position.
• Connect one end of the Ethernet cable to the Ethernet port of the CPE. Stand the
CPE vertically on a flat surface.
• Connect the other end of the same Ethernet cable to an Ethernet port on your PC or
laptop computer.
• Connect the power cord and the power adapter together.
• Plug the power adapter into an AC power outlet.
• The CPE will automatically turn on.
• Connect the power adapter to the power connector on the side of the unit.
Table 2-1 CPE Box Contents
Item Description
rotpadArewoProtpadACA
rotpadACAehtstcennoctahtdrocrewoPdroCrewoP
to the CPE
notroptenrehtEehttcennocotelbaCelbaCtenrehtE
your CPE to your PC or laptop computer
ethernet port
edotediuGediuGtratSkciuQ monstrate the setup and basic
IP configuration
Do NOT mount the CPE unit horizontally and do NOT block the air
ventilation holes at the top of the unit.
NOTE

68P09291A19-C 2-3
APR 2009
Installation 2
Before You Begin Configuration
Some settings on your computer must be verified or changed to ensure that your
computer configuration can support the Desktop CPE.
• Call your service provider to confirm that your service provider has registered your
unit.
• Verify that the IP address and DNS settings are automatically generated in your
Local Area connection of your Internet Protocol (TCP/IP) properties. Refer to the
chapter titled “Configuring TCP/IP” for information on how to do this.
• Ensure you know which protocol you will need to enter in the Setup Wizard
procedure. This will either be EAP-TLS or EAP-TTLS. If EAP-TTLS is to be used,
your service provider will provide you a Username and Password.
User Interface Overview
A web based Graphical User Interface (GUI) is used to configure the features of the CPE.
Figure 2-1: Main Menu Sample

2-4 68P09291A19-C
APR 2009
2 Installation
There are six main menus in the GUI:
The following buttons appear at the bottom of each configuration page:
Table 2-2 Menu Description
Menu Tab Description
otunemsihtesUezilanosreP set up your password,
device time and device name. You can also
abandon your personal settings by
clicking “Restore Factory Settings”.
otunemsihtesUtenretnI configure internet
connection settings, including
Authentication, Protocol, Firewall, and
Dynamic DSN.
idotunemsihtesUsutatS splay network status,
including WiMAX, Internet, LAN, and
Device Information.
unemsihtesUgnidrawroFtroP to enable Universal Plug
and Play (UPnP) Internet Gateway Device
(IGD) profile to allow certain Windows
applications to setup the port forwarding
rule dynamically when NAT is enabled on
this device.
sserddAPIehtyalpsidotunemsihtesUsserddAlacoL
and netmask address in the local network.
ecivedehteganamotunemsihtesUlenaPlortnoC
software.
Table 2-3 Button Descriptions
Button Function
ruoytratseruoyfI.segnahcruoysevaSylppA
CPE without saving your changes, all
changes are lost. After the device restarts,
the last saved configuration is used.
egnahcruoysraelCodnU s on the current page
and returns to the main menu. Once you
click Apply, the Undo button will NOT
clear your changes.
errucehtsmrifnoCtxeN nt setting and moves
on to the next screen.
setadpuyllaunaMhserfeR current status page.
otuasetadpUhserfeRotuA matically without needing
you to refresh manually.
EPCruoyfiyllaunamdraziWputeSstratSdraziW
did not run the setup program
automatically.

68P09291A19-C 2-5
APR 2009
Installation 2
Logging In to the CPE
Use the following procedure to log into the Desktop CPE:
1. On a computer that is connected to the CPE, open a web browser.
Enter the IP address: http://192.168.15.1 into Address field in order to gain
access to your CPE.
If you cannot access the CPE, refer to the chapter titled:
Configuring TCP/IP for more information.
2. The Welcome to Motorola WiMAX CPE screen will be displayed and will prompt
you for a password.
3. In the Password field, type the password (default is motorola).
4. Click Login.
5.
First time users will see a pop-up box that states: “ The Wizard application will guide you
through for the first time configuration. Click OK button to continue.”
6. Click the OK button to launch the wizard application.
Setup Wizard and Authentication
Step 1 - Change Password
Once you have launched the setup wizard, you will be prompted to change your
password. Motorola recommends using a password to protect your home network and
CPE device. Passwords are case-sensitive.
To change your password:
• Ensure the “
Enable Login Password Protection
” box is checked.
• Enter a New Login Password in the box. Passwords can be no more than 20
characters in length.
• Re-type your new password in the Confirm New Login Password box.
• Click Next.
Illustrations in this manual containing an image of what you see on your
computer screen are for reference purposes only. Values shown in the
illustrations in this manual may be different from what you see on your
computer screen
.
NOTE
Or in the Address or Location field, type http://mywimax. and press
ENTER to display the login screen. You must include the period (.) after
http://mywimax. in order to access the login screen.
NOTE

2-6 68P09291A19-C
APR 2009
2 Installation
Step 2 - Device Time
This screen allows you to set the time zone and to enable Daylight Savings Time (when
applicable) for your location.
• Select the appropriate time zone for your location from the drop down box.
• Check the box called “Auto Adjust for Daylight Savings Time” if you live in a region
that observes Daylight Savings Time (this box is checked by default).
• Click Next.
Step 3 - WiMAX Security
The WiMAX Security tab will contain your authentication method. Check with your
service provider to determine if they require a user name and password for
authentication purposes.
• If the Authentication Method is EAP-TLS:
- Enter the Realm information supplied by your service provider.
- Click the Apply button when finished.
• If the Authentication Method is EAP-TTLS/MS-CHAPv2:
- Enter the User name and Password as supplied by your service provider.
- Enter the Realm information as provided by your service provider.
- Click the Apply button when finished.
Congratulations! You have now completed the setup of your WiMAX
connection.
Click OK on the Congratulations! dialog box.
A status screen will appear showing Network status. When your CPE successfully
connects to the Internet, you will see the actual link status and statistics. Note that the
screen shown in this illustration is an example of the screen. Use the scroll bar on your
menu screen to view all the status items that are reported by your unit.
Figure 2-2: Status Screen

68P09291A19-C 3-1
APR 2009
Chapter
3
Chapter 3: Basic Configuration

3-2 68P09291A19-C
APR 2009
3 Basic Configuration
Overview
Once the CPE setup has been completed, you can login to your CPE from any computer
on your home network by typing the device name in the address bar. The default
device name is mywimax. or 192.168.15.1
This section describes the PERSONALIZE, INTERNET, and STATUS Menus that are
available.
Personalize Menu
The Personalize menu provides the following tabs:
• Password
• Device Time
• Device Name
• Restore Factory Settings
Figure 3-1: Personalize Menu
Password Tab
The password tab allows you to enable/disable password protection. You can also
change your password here. Be sure to click the Apply button when finished.
Table 3-1 Password Tab Fields
Field or Button Description
Enable Login Password Protection Checking this box will require login
Password Protection.

68P09291A19-C 3-3
APR 2009
Basic Configuration 3
Device Time Tab
The Device Time tab allows you to establish the time zone for your location. It also
allows you to automatically adjust for Daylight Savings Time if necessary. Be sure to
click the Apply button when finished.
Device Name Tab
The Device Name tab allows you to rename your CPE device. This is the Device Name
you enter on an internet browser address bar to access your CPE device. Be sure to
click the Apply button when finished.
Restore Factory Settings Tab
ruoyretnEdrowssaPnigoLweN new password here. Maximum
20 characters. Passwords are case-
sensitive.
Confirm New Login Password Re-enter your new password here, exactly
as entered above.
Table 3-1 Password Tab Fields
Field or Button Description
Table 3-2 Device Time Tab Fields
Field or Button Description
ucehtswohSemiTlacoLtnerruC rrent local date and time.
pordehtmorfenozemitlacolruoytceleSenoZemiT
down box.
Auto Adjust for Daylight Saving Time Check this box if your location observes
Daylight Savings Time. (Default is
checked)
Table 3-3 Device Name Tab Fields
Field or Button Description
.ecivedEPCehtrofemanwenehtretnEemaNeciveDweN
Maximum 20 characters.
Table 3-4 Restore Factory Settings Tab Fields
Field or Button Description
Restore Factory Settings Checking this box will restore the CPE to
factory default settings. The device will
restart when you click Apply.

3-4 68P09291A19-C
APR 2009
3 Basic Configuration
Internet Menu
The Internet menu provides the following tabs:
• WiMAX Security
• Internet Protocol Tab
• Firewall
• Dynamic DNS
Figure 3-2: Internet Menu Screen
WiMAX Security Tab
The WiMAX Security tab will contain your authentication method. Check with your
service provider to determine if they require a user name and password for
authentication purposes.
If your authentication method is EAP-TLS, then a User Name and Password are not
necessary.
Click the Apply button.
Table 3-5 WiMAX Tab Fields
Field or Button Description
rDdohteMnoitacitnehtuA op down box allows you to select either
EAP-TLS (default) or EAP-TTLS/MS-
CHAPv2.
User Name (EAP-TTLS/MS-CHAPv2 only) Enter the User Name supplied by your
service provider.
Password (EAP-TTLS/MS-CHAPv2 only) Enter the Password supplied by your
service provider.
.redivorpecivresruoyybdeilppuSmlaeR

68P09291A19-C 3-5
APR 2009
Basic Configuration 3
Internet Protocol Tab
Please check with your service provider for these settings. If you are unsure of the
settings, leave the default values set and click the Apply button.
If your service provider has instructed you to change any of these settings, be sure to
click the Apply button when you are finished.
Firewall Tab
A firewall helps to protect your home network from unauthorized access. It will also
help to manage authorized access from the internet to your CPE.
The Enable Web Login from Internet and the Enable Ping from Internet options are by
default turned off. This is because these options allow unknown users to access your
computer via the internet, and this is not safe.
You may need to turn these options on if there is a problem with your CPE/Internet
Connection. Turning these options on will allow your service provider access to your
computer to troubleshoot any problems. Remember to enter the number of the port
that is allowed to access your computer if these options are turned on.
Be sure to click the Apply button once you are finished.
Dynamic DNS Tab
Dynamic Domain Name Service (DDNS) allows a user with a non-static IP address to
keep their domain name associated with an ever changing IP address. As an example,
DDNS is used when you are hosting your own website.
Table 3-6 Firewall Tab Fields
Field or Button Description
rofllawerifehtelbaneotxobsihtkcehCllaweriFelbanE
your home network.
Enable Web Login from Internet (Grayed out if Enable Firewall is not
selected).
Checking this box enables you to access
your CPE device from a network other
than your own.
Web Login Port from Internet Choose a port number to connect to when
logging in from a network other than your
own. The default is 8080.
Enable ping from Internet Enables the CPE to respond to a ping from
the Internet. This option would be enabled
to allow testing only. Do not leave this
enabled.

3-6 68P09291A19-C
APR 2009
3 Basic Configuration
Be sure to click the Apply button once you are finished.
Status Menu
The Status menu provides the following tab:
• Network
Figure 3-3: Status Menu Screen
Network Tab
The Network tab will provide any status associated with your WiMAX Wireless
Broadband connection.
Table 3-7 Dynamic DNS Tab Fields
Field or Button Description
otxobsihtkcehCSNDDelbanE Enable DDNS (default is
unchecked).
uoytahtredivorPecivreSSNDDtceleSredivorPecivreSSNDD
belong to from the drop down box.

68P09291A19-C 4-1
APR 2009
Chapter
4
Chapter 4: Advanced Configuration