Motorola LEX L10 User manual

LEX L10
MISSION CRITICAL
HANDHELD
QUICK START GUIDE

LEX L10

3
Welcome
The LEX L10 is a state-of-the-art device that
delivers many features and benefits in a mission
critical environment. This includes Push-to-Talk
and remote radio control that enable enhanced
communication on the move.
An electronic version of the LEX L10 User Guide
can be downloaded to the device. Tap the
Motorola Techdocs application icon, tap the
download icon, and then select the LEX L10
Mission Critical Handheld User Guide.
BEFORE USING THIS device, READ the LEX L10
Regulatory Guide (p/n MN001458A01) included
with the product package.
Getting Started
NOTE: The LEX L10 may be delivered to you with
SIM card and microSD card already installed,
activated and ready for use. In this case, ignore
steps 2 and 3.
To get started, perform the following steps:
1. Remove the screen protection film from the
screen.
2. Install the private and/or public SIM card(s).
3. Install the microSD card (if applicable).
4. Install the battery.
5. Install the battery cover.
NOTE: Ensure all battery cover snaps are fully
engaged.
6. Charge the battery.
Removing the Screen Protection Film
To enable proper operation of the LEX L10, the
screen protector must be removed before use.

4
Removing the Battery Cover
To remove the battery cover:
1. Hold the LEX L10 firmly as shown.
2. Using the battery cover removal slot, gently lift
the battery cover up and away from the LEX
L10.
Installing microSD Card
1. Slide the card into the card holder slot with con-
tacts facing down.
2. Push the card into the slot until it is fully seated
and locked into place.
Installing Public / Private SIM Cards
1. Slide the SIM card into the SIM card holder with
the contacts facing down. Note the card notch
position.

5
2. Push the SIM card into the holder until it is fully
seated and flat.
3. You should hear a click when the SIM card is
fully in place.
Installing the Battery
To install the battery:
1. Remove the battery from the packaging.
2. Insert the battery (bottom first) into the battery
compartment with the battery contacts facing
the bottom of the LEX L10.
3. Press the top of battery into place.
4. Press the battery cover into place.
NOTE: Ensure all battery cover snaps are fully
engaged.
Charging the Battery
To charge the battery:
1. Plug the USB cable into the USB charger.
2. Plug the USB charger into an AC wall outlet.
3. Lift the rubber flap that covers the USB port on
the bottom of the LEX L10.

6
NOTE: Ensure rubber flaps for USB port and
headset jack are firmly seated when those con-
nectors are not in use.
4. Plug the microUSB connector into the USB port.
5. The charge and notification LED turns solid red,
indicating the battery is charging. When the bat-
tery is fully charged, the LED turns solid green.
Powering On / Off

7
Using the Front Panel Keys
• Back: Press to display the previous screen.
Closes the keyboard if the on-screen keyboard is
open.
• Home: Press to display the Home screen.
• Recent Apps: Press to display a list of recently
used applications.
Locking and Securing
Unlocking the Screen
1. Press the Power
button to wake up
the LEX L10.
2. Slide off the
screen.
Lock the Screen
Press and release the
Power button.
Setting Password
and Security
1. On the Home
screen, tap >
> Security >
Screen lock.
2. Choose a screen lock method.

8
The Home Screen
The Motorola
Solutions Home
Experience (MHx) is
the engine that
drives the user
interface of the LEX
L10. The Home
screen is completely
customizable
depending on the
specifications for
your agency. Each
organization may
have a different
Home screen.
Contact your
technical support for more information. This
screenshot shows an example of a Home screen.
Adding Widgets to the Home Screen
1. On the Home screen, press an hold an empty
area.
2. Tap Widgets.
3. Press and hold the desired widget, drag it to the
Home screen, and then release it.
Removing Widgets from Home Screen
1. Press and hold the widget until it enlarges -
X Remove is displayed on the screen.
2. Drag the item over X Remove until it turns red
and release. The item is removed from the
Home screen.

9
Switching Public / Private Phone
Modes
To switch between public and private carrier
modes:
1. Press and hold the Power button for at least
two seconds.
2. When a dialog box appears, tap Service
switch - the LEX L10 restarts.
Pair the LEX L10 with LMR Radio
This feature allows the LEX L10 to pair with and
remotely control a P25 Land Mobile Radio (LMR).
NOTE: When pairing with APX radio models, a
Mission Critical Wireless option must be enabled
on the radio.
To pair the LEX L10 with a radio:
1. On the radio, turn on the Bluetooth feature.
2. From the Home screen, tap > .
3. Place the blue pairing
point on the radio close
(no more than 2.5 cm) to
the blue pairing point on
the LEX L10.
• If the pairing process is
successful, the radio
sounds an incremental-
pitched tone to indicate
paired.
• If the pairing process
fails, the radio sounds a short, low pitched
tone.
Once a successful pairing is established, the
Bluetooth Connection screen is displayed for a
few seconds, followed by the Radio Services
application screen.

10
Connecting to a WiFi Network
To connect the LEX L10 to WLAN Network:
1. On the Home screen, tap .
2. Tap and set the WiFi option to ON.
3. Tap a WiFi network and enter Username and
Password information if required.
4. Wait until the WiFi network displays Con-
nected.

11

Motorola Solutions, Inc.
1301 E. Algonquin Rd.
Schaumburg, IL 60196-1078, U.S.A.
http://www.motorolasolutions.com
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and
the Stylized M Logo are trademarks or registered
trademarks of Motorola Trademark Holdings, LLC and
are used under license. The Bluetooth trademarks are
owned by their proprietor and used by Motorola
Solutions, Inc. under license. All other trademarks are
the property of their respective owners.
© 2015 Motorola Solutions, Inc. All Rights Reserved.
@MN001457A01@
MN001457A01-A - March 2015