Motorola TETRA MTM800 User manual

MTM800 Enhanced
TETRA Mobile Terminal
Installation Manual
When printed by Motorola
Publication Number
6866539D30-L
@6866539D30@

40 MTM800 Enhanced Mobile Terminal Installation Manual INSTALLATION
Remote Mount Installation
Figure 11 Remote Mount Installation with Remote Head Enhanced/Data Expansion Head Enhanced
Table 5 Associated Components for Remote Mount
Item Description Part Number
1 Remote Mount Cable, 3 m RKN4077
2 Remote Mount Cable, 5 m RKN4078
3 Remote Mount Cable, 5 m RKN4079
4 Remote Mount Cable, 10 m PMKN4020
5 Speaker Extension Cable GMKN4084
6 Remote Head Enhanced PMLN4904
7 Data Expansion Head Enhanced PMLN4908
8 Toroid EMC Suppression Kit 01015001001
The Remote Mount Cable have to be wound 10 times
around each toroid.
Each toroid have to be placed 30.0±2.5 cm respectively
from the expansion head and the control head.
Winding at both ends reduces the effective cable length
approximately by 0.8 m.
Fix the toroids firmly to a stable surface once the Remote
Mount Cable is connected.
Transceiver
10-Pin
Connector
Remote Mount Cable
Remote Mount Enhanced
10-Pin
Connector
Remote Head
or
Data Expansion
Head Enhanced
Enhanced
Flex
Control Head
Toroid
Toroid
10x
10x

INSTALLATION MTM800 Enhanced Mobile Terminal Installation Manual 41
Installing the Remote Mount Enhanced Control Head onto the Remote Mount
Trunnion
1. Slide the Remote Mount Enhanced Control Head onto the mounting trunnion until it snaps
into place.
2. Tighten the screws at both sides of the trunnion. After a few turns, tilt the control head for an
optimum view of the display. Then, complete the tightening of the screws.
Figure 12 Remote Mount Enhanced Control Head Installation with Remote Mount Trunnion
Table 6 Remote Mount Enhanced Control Head Installation with Remote Mount Trunnion
- Mechanical Parts List for Installation
Item Description Part Number
1 & 2 Remote Mount Trunnion Kit PMLN4912
1
2
1
155+/-0.3mm
31mm