Motorola MC9094 User manual

Phone: [phone]
Fax: [phone]
Technical Support Phone: [phone]
E-mail: [email protected]
712 Aurora Avenue North
Seattle, WA 98109
Fulcrum Technologies, Inc.
Symbol / Motorola
MC9094
Mobile Computing Device
(MCD)
Guide
Icon Description
MCD is in flight mode.
No signal or MCD is searching for a signal.
Full signal.
Connection is active.
GPRS connection is available.
GPRS connection is in use.
EGPRS connection is available.
EGPRS connection is in use.
Backup battery is low.
Main battery is on charge. *
Main battery is low.
Main battery is extremely low.
Main battery is fully charged. *
Speaker is on.
Speaker is off.
Vibrate mode is on.
MCD Icons display at the top of the screen
next to the Start Menu.
* Icons only display on the Today screen.

MCD FUNCTIONS
SET DATE AND TIME
1. Start
2. Settings
3. System tab
4. Clocks and Alarms
ALIGN SCREEN
1. Start
2. Settings
3. System tab
4. Screen
5. Align Screen
6. Follow the on screen prompts
VIEW BATTERY STATUS
1. Start
2. Settings
3. System tab
4. Power
5. Battery tab
ADJUST POWER SETTINGS
1. Start
2. Settings
3. System tab
4. Power
5. Advanced tab
SET WAKEUPS
1. Start
2. Settings
3. System tab
4. Power
5. Wakeup tab
6. Toggle between Yes / No
7. Tap Apply
ADJUST BACKLIGHT SETTINGS
1. Start
2. Settings
3. System tab
4. Backlight
MCD FUNCTIONS
ADJUST VOLUME SETTINGS
1. Start
2. Settings
3. Personal tab
4. Sounds & Notifications
ADJUST VOLUME
1. Tap Speaker Icon
2. Adjust volume desired levels
Or
1. Press the gray up/down button
located on the left side of the
MCD
2. Adjust volume to desired levels
TURN FLIGHT MODE ON / OFF
1. Tap Antenna Icon
2. Tap ‘Turn on / off flight mode’
hyperlink
TURN WIRELESS CONNECTIONS
ON / OFF
1. Start
2. Settings
3. Connections tab
4. Wireless Manager
5. Toggle on / off switches
WARM BOOT
1. Press and hold the red power
button for 5-6 seconds.
2. Release the power button as
the Warm Boot screen appears.
COLD BOOT
1. Eject battery partially.
2. Press the left scan button and
power button simultaneously.
3. Push in the battery.
BASIC TROUBLESHOOTING
MCD does not turn on.
1. Charge or replace the battery.
2. Warm boot the MCD.
3. Cold boot the MCD.
MCD powers on when bumped,
moved, or touched.
Set all Wakeups to ‘NO’.
Beep heard after barcode is
scanned but not after Mobility
routine completes.
Adjust the Volume.
Icons and menus do not open when
tapped.
Align the screen.
MCD cannot make a data connec-
tion.
1. Turn off Flight Mode.
2. Warm boot the MCD.
3. Re-position the SIM Card.
MCD TECHNICAL SPECIFICATIONS
Temperature Settings
Operating: -4º F - 122º F
Storage: -25º F - 160º F
Charging: 32º F - 104º F
Operating System
Windows Mobile® 5.0
Main Battery
Rechargeable Lithium Ion 7.4V
Humidity
5% to 95% Non-Condensing