Motorola SE-5100 User manual

SE-5100/5150
AVC Multi-Format Video Encoder
SPECIFICATION SHEET
High Performance MPEG-4 AVC HD/SD Receiver Encoder for VBR and CBR
Applications
Highlights Include:
• Areal-time, full resolution High Definition and
Standard Definition AVC video encoder
• Support for Main Profile Encoding @ Level 4 for
HD services and Main Profile @ Level 3 for SD
services
• Multi-passCBRencoding
• Input flexibility
- Baseband SDI/HD-SDI (selectable HD/SD)
- MPEG-2/UDP/IP compressed input
- Off air RF input (on SE-5150)
• Integrated low resolution proxy (PIP)
• Motion Compensated Noise Reduction (MCTF) in
SD mode for enhanced video quality
• Constrained Fidelity (CF-CBR) capped VBR mode
• Statisticalmultiplexingcapability
• Microsoft®Mediaroom™conformancetested
• Adinsertionsupport
• Digital Turn Around for MPEG-2 inputs
• SNMP interface
• Web browser interface
For more information regarding any of these features
contact your Motorola sales representative.
This HD/SD platform combines receiver functions
with advanced encoding technology to deliver CBR
and VBR video services at exceptionally low bit
rates. In addition to supporting baseband video,
the compact 1RU platform offers support for analog
off air, ATSC digital terrestrial and direct MPEG-2
inputs.
Thereceiverfunctionsdramaticallyenhanceheadend
architectures, reducing box count, simplifying signal
routing and redundancy support. This IP centric
platform delivers flexibility, value and exceptional
video quality from its advanced multi-pass encoding
system. The rich feature set includes HD upgrade
option, support for statistical multiplexing over an
IP infrastructure, highly efficient HE-AAC audio plus
Constrained Fidelity CBR, a capped VBR mode for
IPTV environments.
Additionally, the platform offers a low resolution
proxy output stream for program guide or monitoring
applications.This Linux based platform offers an ASI
option for the SE-5100 and is ideal for demanding
CBR and VBR applications.

SPECIFICATION SHEET
SE-5100/5150
TECHNICAL SPECIFICATIONS
MPEG-4 Features
Motion Estimation: Supports P, B & reference B frames
16x16 and 8x8 block sizes
1/4 Pixel motion estimation
Weighted prediction
Noise Reduction: SD Motion Compensated Temporal Filter
(MCTF)
Rate Control: Multi pass encoding with CBR, VBR, and
CF-CBR rate control
Dynamic GOP - adaptive B frame (SD
mode)
Selectable GOP structure
Coding: CABAC entropy coding
Other: De-blocking filter
Video Processing
Input: HDSDI per SMPTE-292M
SDI per SMPTE-259M
Formats: 1080i/29.97; 720p/59.94
1080i/25; 720p/50 (HD)
625i/50; 525i/29.97 (SD)
Embedded Audio: per SMPTE-272M/-299M
4 stereo pairs
MPEG-4 Profile: Main; Level 4 (HD) Main; Level 3 (SD)
Low resolution proxy (PIP)
Receiver Inputs
MPEG-2/UDP/IP
ATSC digital terrestrial
NTSC with GCR ghost cancellation
Audio Processing
Mode: MPEG-1 Layer 2
HE-AAC (v2) audio encoding
Dolby®Digitalpass-through
Dolby Digital 2.0 (optional 2 stereo pairs)
BTSC audio extraction and SAP from NTSC
input
Ancillary Signal Support
Signals: L21 EIA 608, EIA 708 closed captioning,
Teletext
Digital Video Input
Signal: Serial digital per SMPTE-292M (HD)
Serial digital per SMPTE-259M (SD)
Connector: BNC, female
Number: 1
Digital Audio Input
Signal: Serial digital AES
Connector: BNC, female
Number: 2
Compressed Stream
Output
Ethernet: 3 Gigabit, 1 10/100, RJ-45
IP: Unicast or Multicast
Main plus PIP on SPTS MPEG-
2/UDP/IP
ASI Output: 2 (Optional), BNC, female
H.264: MPEG-2 Transport Stream over
UDP/IP
SCTE35 ad-insertion splice
points from SCE104 inputs
MPEG-2 input - Digital turn
around over UDP/IP
Control and Status
Type: Browser interface for single unit
control
SNMPv2 with published MIB
Linux operating system
Physical
Width: 18.9” (48cm)
Depth: 15.5” (39.4cm)
Height: 1RU, 1.75” (5cm)
Weight: 14 lb
Packaged Weight:20 lb
Power: 115-230V (continuous), 47-63Hz
Power Consumption: less than 100W
Cooling air: front to rear
Temperature: to 40C
Other
Limited Warranty: One year
Compliance: FCC, CE, UL, RoHS and TUV
Ordering
SE-5100 shown below
SE-5100A ASI output
SE-5150 RF input
Ordering Options
SE-DD2 Two stereo pairs Dolby Digital 2.0
SE-HDVBR HD StamuxIP support
Motorola, Inc. Home & Networks Mobility
985 Stewart Drive, Sunnyvale, California 94085 U.S.A.
www.motorola.com/ipvideo 408-245-2150
MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their registered owners. Microsoft is a registered
trademark of Microsoft Corporation. Dolby is a registered trademark of Dolby Laboratories. Dolby Digital is manufactured under license from Dolby Laboratories. © Motorola, Inc. 2007 All rights
reserved. Features and functions subject to change without notice. 5707-d-1207-0K