Motorola PMMN4131 User manual

PMMN4131 RM730
IMPRES Windporting
Remote Speaker
Microphone, Small (IP68)
User Guide
*MN007524A01*
MN007524A01-AB
FEBRUARY 2022
© 2022 Motorola Solutions, Inc. All rights reserved
en-US fr-CA es-LA pt-BR zh-CN zh-TW
ja-JP ko-KR ru-RU uk-UA ar-EG

Safety and Legal
This section provides the safety and legal information for this product.
Intellectual Property and Regulatory Notices
Copyrights
The Motorola Solutions products described in this document may include copyrighted Motorola
Solutions computer programs. Laws in the United States and other countries preserve for Motorola
Solutions certain exclusive rights for copyrighted computer programs. Accordingly, any copyrighted
Motorola Solutions computer programs contained in the Motorola Solutions products described in this
document may not be copied or reproduced in any manner without the express written permission of
Motorola Solutions.
No part of this document may be reproduced, transmitted, stored in a retrieval system, or translated
into any language or computer language, in any form or by any means, without the prior written
permission of Motorola Solutions, Inc.
Trademarks
MOTOROLA, MOTO, MOTOROLA SOLUTIONS, and the Stylized M Logo are trademarks or
registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other
trademarks are the property of their respective owners.
License Rights
The purchase of Motorola Solutions products shall not be deemed to grant either directly or by
implication, estoppel or otherwise, any license under the copyrights, patents or patent applications
of Motorola Solutions, except for the normal non-exclusive, royalty-free license to use that arises by
operation of law in the sale of a product.
Open Source Content
This product may contain Open Source software used under license. Refer to the product installation
media for full Open Source Legal Notices and Attribution content.
European Union (EU) and United Kingdom (UK) Waste of Electrical and
Electronic Equipment (WEEE) Directive
The European Union's WEEE directive and the UK's WEEE regulation require that products sold
into EU countries and the UK must have the crossed-out wheelie bin label on the product (or the
package in some cases). As defined by the WEEE directive, this crossed-out wheelie bin label means
that customers and end-users in EU and UK countries should not dispose of electronic and electrical
equipment or accessories in household waste.
Customers or end-users in EU and UK countries should contact their local equipment supplier
representative or service centre for information about the waste collection system in their country.
Disclaimer
Please note that certain features, facilities, and capabilities described in this document may not be
applicable to or licensed for use on a specific system, or may be dependent upon the characteristics of
MN007524A01-AB
Safety and Legal
2

a specific mobile subscriber unit or configuration of certain parameters. Please refer to your Motorola
Solutions contact for further information.
© 2022 Motorola Solutions, Inc. All Rights Reserved
Certification Markings
Contact Address
European Union Contact
Motorola Solutions,
Czerwone Maki 82,
30-392 Krakow, Poland
MN007524A01-AB
Safety and Legal
3

Contact Us
The Solutions Support Center (SSC) is the primary contact for technical support included in your
organization's service agreement with Motorola Solutions.
Service agreement customers should be sure to call the SSC in all situations listed under Customer
Responsibilities in their agreement, such as:
•Before reloading software
• To confirm troubleshooting results and analysis before taking action
Your organization received support phone numbers and other contact information appropriate for your
geographic region and service agreement. Use that contact information for the most efficient response.
However, if needed, you can also find general support contact information on the Motorola Solutions
website, by following these steps:
1Enter motorolasolutions.com in your browser.
2Ensure that your organization's country or region is displayed on the page. Clicking or tapping the
name of the region provides a way to change it.
3Select "Support" on the motorolasolutions.com page.
Comments
Send questions and comments regarding user documentation to
[email protected].
Provide the following information when reporting a documentation error:
• The document title and part number
• The page number or title of the section with the error
• A description of the error
Motorola Solutions offers various courses designed to assist in learning about the system. For
information, go to https://learning.motorolasolutions.com to view the current course offerings and
technology paths.
MN007524A01-AB
Contact Us
4

Icon Conventions
The documentation set is designed to give the reader more visual clues. The following graphic icons
are used throughout the documentation set.
DANGER: The signal word DANGER with the associated safety icon implies information that, if
disregarded, will result in death or serious injury.
WARNING: The signal word WARNING with the associated safety icon implies information that,
if disregarded, could result in death or serious injury, or serious product damage.
CAUTION: The signal word CAUTION with the associated safety icon implies information that,
if disregarded, may result in minor or moderate injury, or serious product damage.
CAUTION: The signal word CAUTION may be used without the safety icon to state potential
damage or injury that is not related to the product.
IMPORTANT: IMPORTANT statements contain information that is crucial to the discussion
at hand, but is not CAUTION or WARNING. There is no warning level associated with the
IMPORTANT statement.
NOTE: NOTICE contains information more important than the surrounding text, such as
exceptions or preconditions. They also refer the reader elsewhere for additional information,
remind the reader how to complete an action (when it is not part of the current procedure,
for instance), or tell the reader where something is on the screen. There is no warning level
associated with a notice.
MN007524A01-AB
Icon Conventions
5

Style Conventions
The following style conventions are used:
Convention Description
Bold This typeface is used for names of, for instance, windows, buttons,
and labels when these names appear on the screen (example: the
Alarms Browser window). When it is clear that we are referring to, for
instance, a button, the name is used alone (example: Click OK).
Monospacing font
in bold
This typeface is used for words to be typed in exactly as they are
shown in the text (example: In the Address field, type http://
ucs01.ucs:9080/).
Monospacing font This typeface is used for messages, prompts, and other text displayed
on the computer screen (example: A new trap destination has
been added).
<Monospacing font
in bold Italic>
This typeface is used with angle brackets as placeholders for a specif-
ic member of the group that the words represent (example: <router
number>).
NOTE: In sequences to be typed in, the angle brackets
are omitted to avoid confusion whether to include the angle
brackets in the text to be typed.
CAPITAL LETTERS This typeface is used for keyboard keys (example: Press Y, and then
press ENTER).
Italic This typeface is used for citations. A citation usually is the name of a
document or a phrase from another document (example: Dimetra IP
System Overview).
→ An → (arrow pointing right) is used for indicating the menu or tab
structure in instructions on how to select a certain menu item (exam-
ple: File→Save) or a certain sub-tab.
MN007524A01-AB
Style Conventions
6

RF Energy Exposure and Product
Safety Guide
This document contains important safety and operating instructions. Read these instructions carefully
and save them for future reference.
CAUTION:
Before using this accessory, read this guide which contains important operating instructions for
safe usage and RF energy awareness and control for compliance with applicable standards and
regulations.
The Remote Speaker Microphone (RSM), when attached to the radio, is restricted to
occupational use only to satisfy FCC/ICNIRP RF energy exposure requirements. Before using
this product, read the RF energy awareness information and operating instructions in the
Product Safety and RF Exposure booklet enclosed with your radio to ensure compliance with
RF energy exposure limits.
Acoustic Safety
Exposure to loud noises from any source for extended periods of time may temporarily or permanently
affect your hearing. The louder the volume of the radio, the less time is required before your hearing
can be affected.
Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect.
Follow the following guidelines to protect your hearing:
• Use the lowest volume necessary to do your job.
• Turn up the volume only if you are in noisy surroundings.
• Turn down the volume before attaching headset or earpiece.
• Limit the amount of time you use headsets or earpieces at high volume.
• When using the radio without a headset or earpiece, do not place the speaker of the radio directly
against your ear.
• If you experience hearing discomfort, ringing in your ears, or muffled speech, you should stop
listening to your radio through your headset or earpiece, and have your hearing checked by your
doctor. To change the volume level, refer to Radio Product Safety Leaflet or CPS for Surveillance
extra loud (xL) Kit Configurations.
MN007524A01-AB
RF Energy Exposure and Product Safety Guide
7

Chapter 1
About PMMN4131 RM730 IMPRES
Windporting RSM, Small (IP68)
1.1
RSM Feature
Figure 1: RSM Features
1
3
2
Table 1: RSM Feature Callouts
No Descriptions
1 Push-to-Talk Button
2 Receive-only 3.5 mm Audio Jack (Non-threaded) covered by Dust Cover
3 Accessory Orange/Emergency Button.1
1Check with your dealer for available programmable functions
MN007524A01-AB
Chapter 1 : About PMMN4131 RM730 IMPRES Windporting RSM, Small (IP68)
8

1.2
Recommended Practices for RM730
• Cover the audio jack with dust cover when it is not plugged with earpiece. Do not fill water into the
audio jack.
• If water enters the audio jack, remove water by shaking the RSM.
Transmitting and Receiving
Figure 2: Transmitting
MN007524A01-AB
Chapter 1 : About PMMN4131 RM730 IMPRES Windporting RSM, Small (IP68)
9

Figure 3: Receiving
Recommended Wearing Position
Figure 4: RM730 Wearing Position
1.3
Attaching the RSM to the Radio
Procedure:
1Attach the RSM connector to the side connector of the radio.
2Secure the connection screw in a clockwise direction until tightened.
NOTE: To ensure proper operation, turn off the radio before connecting the RSM to the
radio. Connecting the RSM to the radio disables the speaker of the radio, but does not
disable the microphone and PTT of the radio.
MN007524A01-AB
Chapter 1 : About PMMN4131 RM730 IMPRES Windporting RSM, Small (IP68)
10

1.4
Detaching the RSM from the Radio
Procedure:
1Unscrew and detach the RSM connector from the radio side connector.
2Keep the dust cover inserted in the audio jack of the RSM when a secondary accessory is not
being used.
1.5
Cable Management
Figure 5: Cable Management
NOTE: To ensure optimum range and user experience, it is recommended to avoid crossing
accessory cable with the radio antenna.
1.6
Optional Accessories
No Descriptions
PMLN8120 Rx only xL Clear Tube Earpiece, 3.5 mm Jack
MN007524A01-AB
Chapter 1 : About PMMN4131 RM730 IMPRES Windporting RSM, Small (IP68)
11

Chapter 2
Replacement Parts
1
2
3
Table 2: Replacement Parts Callouts
No Descriptions
1 Low Profile Swivel Clip (PMLN8121)
2 Dust Cover 10 pieces/pack (PMLN8523)
3 Coil Cord (PMKN4232)
MN007524A01-AB
Chapter 2 : Replacement Parts
12

2.1
Replacing Coil Cord
Procedure:
1Remove the screws to disassemble the RSM.
2Remove the cable.
3Reassemble the RSM.
MN007524A01-AB
Chapter 2 : Replacement Parts
13

2.2
Removing Dust Cover
Procedure:
1Lift up dust cover until it is fully open.
2Insert small flat tip tool into recess and pry out the dust cover.
12
2.3
Inserting Dust Cover
Procedure:
1Slide the side tab of Dust Cover into the recess slot.
MN007524A01-AB
Chapter 2 : Replacement Parts
14

2Push the opposite side with small tool.
3Simultaneously push the Dust Cover into the RSM.
12
3
2.4
Attaching Swivel Clip
Procedure:
1
2
3
1Match and align the arrowhead icons and side wings.
2Push down the top of the clip.
3Simultaneously, push slide clip upward.
MN007524A01-AB
Chapter 2 : Replacement Parts
15

2.5
Detaching Swivel Clip
Procedure:
2
1
3
1Push top of the clip to raise the clip to the highest position.
2Lift up the bottom release latch.
3Slide the clip to remove the clip.
MN007524A01-AB
Chapter 2 : Replacement Parts
16

Chapter 3
Service and Warranty
Motorola Solutions offers warranty for your RSM. Refer to your Motorola Solutions dealer or point-of-
purchase for detailed information.
NOTE: Warranty is void after customer replacement of any parts other than replacements parts
listed.
MN007524A01-AB
Service and Warranty
17

Guide d'utilisation du
microphone/haut-parleur
à atténuation du
vent IMPRES RM730
PMMN4131, petit (IP68)
*MN007524A01*
MN007524A01-AB
FÉVRIER 2022
© 2022 Motorola Solutions, Inc. All rights reserved

Sécurité et aspect juridique
Cette section fournit des renseignements sur la sécurité et l’aspect juridique pour ce produit.
Propriété intellectuelle et avis réglementaires
Droits d’auteur
Les produits Motorola Solutions décrits dans ce document peuvent inclure des programmes
informatiques protégés par des droits d'auteur de Motorola Solutions. Les lois des États-Unis
et d’autres pays réservent à Motorola Solutions certains droits exclusifs pour les programmes
informatiques protégés par droits d’auteur. Par conséquent, tout programme informatique protégé par
droits d’auteur de Motorola Solutions compris dans les produits Motorola Solutions décrits dans le
présent document ne peut être copié ni reproduit de quelque manière que ce soit sans l’autorisation
écrite expresse de Motorola Solutions.
Aucune partie du présent document ne peut être reproduite, transmise, stockée dans un système de
recherche documentaire ou traduite dans une autre langue ou dans un langage informatique, sous
quelque forme ou par quelque moyen que ce soit, sans l’autorisation écrite préalable de Motorola
Solutions, Inc.
Marques de commerce
MOTOROLA, MOTO, MOTOROLA SOLUTIONS et le logo au M stylisé sont des marques de
commerce ou des marques déposées de Motorola Trademark Holdings LLC et sont utilisées sous
licence. Toutes les autres marques de commerce sont la propriété de leurs détenteurs respectifs.
Droits de licence
L’achat de produits Motorola Solutions ne peut être considéré comme une transaction octroyant
directement, par inférence, estoppel ou autrement une licence en vertu des droits d’auteur, des droits
de brevets ou d’une demande de brevet de Motorola Solutions, à l’exception d’une licence d’utilisation
normale et non exclusive, libre de toute redevance, prévue par la loi lors de la vente d’un produit.
Contenu à code source libre
Ce produit peut contenir des logiciels libres utilisés sous licence. Reportez-vous au support
d’installation du produit pour obtenir tous les avis juridiques relatifs aux logiciels libres et aux contenus
d’attribution.
Directive sur la mise au rebut des équipements électriques et électroniques
(DEEE) de l’Union européenne (UE) et du Royaume-Uni (RU)
La directive DEEE de l’Union européenne et les réglementations DEEE du Royaume-Uni exigent
que les produits (ou leur emballage, dans certains cas) vendus dans les pays de l’UE ou au Royaume-
Uni portent l’étiquette de la poubelle barrée. Comme le définit la directive DEEE, cette étiquette de
poubelle barrée signifie que les clients et les utilisateurs finaux dans les pays de l’UE et du RU ne
doivent pas jeter les équipements électriques et électroniques ou leurs accessoires dans les ordures
domestiques.
Les clients ou les utilisateurs finaux dans les pays de l’UE et du RU doivent communiquer
avec le représentant ou le centre de service de leur fournisseur d’équipement pour obtenir des
renseignements sur le système de collecte des déchets de leur pays.
MN007524A01-AB
Sécurité et aspect juridique
2

Avis de non-responsabilité
Veuillez noter que certaines fonctionnalités, installations et capacités décrites dans ce document
pourraient ne pas s'appliquer ou être accordées sous licence pour l'utilisation sur un système
particulier, ou pourraient dépendre des caractéristiques d'une unité mobile d'abonné ou d'une
configuration de certains paramètres. Veuillez consulter votre personne-ressource chez Motorola
Solutions pour en savoir plus.
© 2022 Motorola Solutions, Inc. Tous droits réservés
Marques de certification
Adresse de communication
Pour l’Union européenne, communiquez avec :
Motorola Solutions,
Czerwone Maki 82,
30-392 Krakow, Pologne
MN007524A01-AB
Sécurité et aspect juridique
3