Motorola APX 6000 XE Installation guide

MOTOROLA
APX 6000 XE
RADIO OVERVIEW
A basic overview to review the key
components of the new radios

Motorola APX 6000 XE with XE-
RSM microphone attached
RSM IS REQUIRED ON ALL RADIOS ASSIGNED TO BBFR OPERATIONS
Remote
Speaker
Microphone
(RSM)
APX 6000 XE

RADIO HIGHLIGHTS
Top mount display screen - easily visible while
wearing
Larger knobs for easier use
Larger orange emergency button

Top mount display
Volume
Group
Select
Channel Select
Emergency
button

Radio side-view
Radio display
Illumination/rotation
Push-to-talk
button
To change from groups
ABC to DEF and back
(bottom button only)

Group Selection
Radio groups can change from A to B
to C with selector switch located
between the volume and channel
selector knobs
To get to D, E, or F groups: Press this
bottom button On the side
of the radio, then rotate the selector
switch to the respective group

Display Illumination/Rotation
To illuminate the radio display, press this
button on the side of your radio.
To rotate your display view, press and
hold this button on the side of your radio.

Removing the battery
To remove the battery:
1) squeeze the battery on both sides, where the yellow arrows are pointing
2) slide the battery in the direction of the green arrow.

XE-RSM
MICROPHONE HIGHLIGHTS
2-microphone design to cancel out
background noise
Easily accessible with bulky gloves
Protected buttons to prevent accidentals
Prominent Push-To-Talk Button

Large orange emergency button with strobe light
activation
Built-in flashlight
Large Volume Switch –50% louder –ramp up
volume
One inch reflective tape
SEE USER GUIDE FOR MORE DETAILS