Motorola Talkabout T5600 User manual

T5600, T5620, T5700, T5710, T5720
Preliminary User Guide
10/28/2002

Introduction
1
Preliminary
Introduction
Congratulations on your purchase of a Motorola Product!
Product registration is an important step toward enjoying your new Motorola
product. Registering helps us facilitate warranty service, and permits us to contact
you should your Motorola product require an update of other service. Registration is
not required for warranty coverage.
To register your product on-line, visit www.motorola.com/warranty/radios.
Please retain your original dated sales receipt for your records. For warranty service
of your Motorola Personal Communications Product you will need to provide a copy
of your dated sales receipt to confirm warranty status.
For a copy of a large-print version of this guide, or for product-related questions, call:
1-800-353-2729 in the USA
1-888-390-6456 TTY (Text Telephone)
On the web, please refer to www.motorola.com/talkabout
1042b60o.book Page 1 Monday, October 28, 2002 5:03 PM

Preliminary
Introduction . . . . . . . . . . . . . . . . . . . . . . .1
Safety and General Information . . . . . . .3
Battery Charger Safety Instructions . . . .9
Control Buttons - T5600, T5700 . . . . . .11
Control Buttons - T5620, T5710, T5720 12
Getting Started . . . . . . . . . . . . . . . . . . . .13
Installing the Batteries . . . . . . . . . . . . .13
Charging Desk Stand
(Optional Accessory) . . . . . . . . . . . . 15
Turning Your Radio On and Off . . . . . .16
Setting the Volume . . . . . . . . . . . . . . . .17
Setting a Channel . . . . . . . . . . . . . . . . .17
Talking and Listening . . . . . . . . . . . . . .18
Monitor Button . . . . . . . . . . . . . . . . . . .18
Talk Range . . . . . . . . . . . . . . . . . . . . . .19
Radio Etiquette . . . . . . . . . . . . . . . . . . . 19
Special Features . . . . . . . . . . . . . . . . . .20
Interference Eliminator Code . . . . . . . .20
Timeout Timer . . . . . . . . . . . . . . . . . . . .21
Keypad Lock . . . . . . . . . . . . . . . . . . . . .21
Scan (T5620, T5700, T5710 Only) . . . .21
Scan Advance . . . . . . . . . . . . . . . . . . . . 22
Nuisance Delete . . . . . . . . . . . . . . . . . .22
Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Channel Busy Indicator . . . . . . . . . . . . . 23
Call Tone . . . . . . . . . . . . . . . . . . . . . . . .23
Roger Beep/Talk Confirmation Tone . . .23
QuieT6000™
(T5700, T5710, T5720 Only) . . . . . .24
Accessories . . . . . . . . . . . . . . . . . . . . . .26
To Use Audio Accessories . . . . . . . . . .26
Hands-Free Use/Voice Activation (VOX)
with Compatible VOX Accessories
(T5710, T5720 Only) . . . . . . . . . . . . .27
Belt Clip (Included) . . . . . . . . . . . . . . . .29
Troubleshooting . . . . . . . . . . . . . . . . . . .30
Use and Care . . . . . . . . . . . . . . . . . . . . .32
Motorola Limited Warranty . . . . . . . . . .34
Export Law Assurances . . . . . . . . . . . .40
Contents
1042b60o.book Page 2 Monday, October 28, 2002 5:03 PM

Safety and General Information
3
Preliminary
Safety and General Information
Important Information on Safe and Efficient Operation
Read This Information Before Using Your Radio
The information provided in this document supersedes the general safety information
contained in user guides published prior to July 2000.
Transmit and Receive Procedure
Your two-way radio contains a transmitter and a receiver. To control your exposure and
ensure compliance with the general population/uncontrolled environment exposure limits,
always adhere to the following procedure:
• Transmit no more than 50% of the time
• To transmit (talk), push the Talk button
• To receive calls, release the Talk button
Transmitting 50% of the time, or less, is important because the radio generates
measurable RF energy exposure only when transmitting (in terms of measuring
standards compliance).
Exposure to Radio Frequency Energy
Your Motorola radio is designed to comply with the following national and international
standards and guidelines regarding exposure of human beings to radio frequency
electromagnetic energy:
• United States Federal Communications Commission, Code of Federal Regulations;
47 CFR part 2 sub-part J
1042b60o.book Page 3 Monday, October 28, 2002 5:03 PM

Safety and General Information
4
Preliminary
• American National Standards Institute (ANSI) / Institute of Electrical and
Electronic Engineers (IEEE) C95. 1-1992
• Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition
• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998
• Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radio
Frequency Electromagnetic Fields in the Frequency Range from 3 kHz to
300 GHz, 1999
• Australian Communications Authority Radiocommunications (Electromagnetic
Radiation - Human Exposure) Standard 2001 (applicable to wireless phones only)
• ANATEL, Brasil Regulatory Authority, Resolution 256 (April 11, 2002) “additional
requirements for SMR, cellular, and PCS product certification.”
To assure optimal radio performance and make sure human exposure to radio
frequency electromagnetic energy is within the guidelines set forth in the above
standards, always adhere to the following procedures.
Portable Radio Operation and EME Exposure
Antenna Care
Use only the supplied or an approved replacement antenna.
Unauthorized
antennas, modifications, or attachments could damage the radio and may violate FCC
regulations.
DO NOT hold the antenna when the radio is “IN USE.” Holding the antenna affects
the effective range.
1042b60o.book Page 4 Monday, October 28, 2002 5:03 PM

Safety and General Information
5
Preliminary
Two-Way Radio Operation
When using your radio as a traditional two-way radio, hold the radio in a
vertical position with the microphone one to two inches (2.5 to
5 cm) away from the lips.
Body-Worn Operation
To maintain compliance with FCC/Health Canada RF exposure guidelines, if you wear a
radio on your body when transmitting, always place the radio in
a Motorola-supplied or
approved clip, holder, holster, case, or body harness for this product. Use of non-
Motorola-approved accessories may exceed FCC/Health Canada RF exposure
guidelines. If you do not use one of the Motorola-supplied or approved body-worn
accessories, and are not using the radio held in the normal use position,
ensure the
radio and its antenna are at least one inch (2.5 cm) from your body when
transmitting
.
Data Operation
If applicable, when using any data feature of the radio with or without an accessory cable,
position the radio and its antenna at least one inch (2.5 cm) from the body.
Approved Accessories
For a list of approved Motorola accessories visit our website at www.mot.com .
Electromagnetic Interference/Compatibility
Note:
Nearly every electronic device is susceptible to electromagnetic interference
(EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic
compatibility.
1042b60o.book Page 5 Monday, October 28, 2002 5:03 PM

Safety and General Information
6
Preliminary
Facilities
To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio
in any facility where posted notices instruct you to do so. Hospitals or health care
facilities may be using equipment that is sensitive to external RF energy.
Aircraft
When instructed to do so, turn off your radio when on board an aircraft. Any use of a
radio must be in accordance with applicable regulations per airline crew instructions.
Medical Devices
Pacemakers
The Advanced Medical Technology Association recommends that a minimum
separation of six inches (15 cm) be maintained between a handheld wireless radio
and a pacemaker. These recommendations are consistent with the independent
research by, and recommendations of the U.S. Food and Drug Administration.
Persons with pacemakers should:
• ALWAYS keep the radio more than six inches (15 cm) from their pacemaker when
the radio is turned ON.
• Not carry the radio in the breast pocket.
• Use the ear opposite the pacemaker to minimize the potential for interference.
• Turn the radio OFF immediately if you have any reason to suspect that
interference is taking place.
1042b60o.book Page 6 Monday, October 28, 2002 5:03 PM

Safety and General Information
7
Preliminary
Hearing Aids
Some digital wireless radios may interfere with some hearing aids. In the event of such
interference, you may want to consult your hearing aid manufacturer to discuss
alternatives.
Other Medical Devices
If you use any other personal medical device, consult the manufacturer of your device to
determine if it is adequately shielded from RF energy. Your physician may be able to
assist you in obtaining this information.
Safety and General Use While Driving
Check the laws and regulations on the use of radios in the area where you drive. Always
obey them. When using your radio while driving, please:
• Give full attention to driving and to the road.
• Use hands-free operation, if available.
• Pull off the road and park before making or answering a call if driving conditions so
require.
Operational Warnings
For Vehicles with an Air Bag
Do not place a portable radio in the area over an air bag or in the air bag deployment area.
Air bags inflate with great force. If a portable radio is placed in the air bag deployment area
and the air bag inflates, the radio may be propelled with great force and cause serious
injury to occupants of the vehicle.
1042b60o.book Page 7 Monday, October 28, 2002 5:03 PM

Safety and General Information
8
Preliminary
Potentially Explosive Atmospheres
Turn off your radio prior to entering any area with a potentially explosive atmosphere,
unless it is a radio type especially qualified for use in such areas as “Intrinsically Safe.”
Do not remove, install, or charge batteries in such areas. Sparks in a potentially explosive
atmosphere can cause an explosion or fire resulting in bodily injury or even death.
Note: The areas with potentially explosive atmospheres referred to above include
fueling areas such as below decks on boats, fuel or chemical transfer or storage
facilities, areas where the air contains chemicals or particles, such as grain, dust or
metal powders, and any other area where you would normally be advised to turn off
your vehicle engine. Areas with potentially explosive atmospheres are often but not
always posted.
Blasting Caps and Areas
To avoid possible interference with blasting operations, turn off your radio when you
are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-
way radio.” Obey all signs and instructions.
Operational Cautions
Antennas
Do not use any portable radio that has a damaged antenna.
If a damaged antenna
comes into contact with your skin, a minor burn can result.
Batteries
All batteries can cause property damage and/or bodily injury such as burns if a
conductive material such as jewelry, keys, or beaded chains touch exposed terminals.
1042b60o.book Page 8 Monday, October 28, 2002 5:03 PM

Safety and General Information
9
Preliminary
The conductive material may complete an electrical circuit (short circuit) and become
quite hot. Exercise care in handling any charged battery, particularly when placing it
inside a pocket, purse, or other container with metal objects.
Battery Charger Safety Instructions
Save these Charger Instructions
1. Do not expose the charger to rain or snow.
2. Do not operate the charger if it has received a sharp blow, or has been dropped
or damaged in any way.
3. Do not disassemble the charger if it has received a sharp blow, or has been
dropped or damaged in any way.
4. Never alter the AC cord or plug provided with the unit. If plug will not fit the out-
let, have proper outlet installed by a qualified electrician. An improper condition
can result in a risk of electric shock.
5. To reduce risk of damage to cord or plug, pull the plug rather than the cord when
disconnecting charger from AC receptacle.
6. To reduce the risk of electric shock, unplug the charger from the outlet before
attempting any maintenance or cleaning.
7. Use of an attachment not recommended or sold by Motorola may result in a risk
of fire, electric shock, or personal injury.
8. Make sure that the cord is located so that it will not be stepped on, tripped over,
or subjected to damage or stress.
1042b60o.book Page 9 Monday, October 28, 2002 5:03 PM

Safety and General Information
10
Preliminary
9. An extension cord should not be used unless absolutely necessary. Use of
an improper extension cord could result in a risk of fire and/ or electric shock.
If an extension cord must be used, make sure that:
• The pins on the plug of the extension cord are the same number, size and
shape as those on the plug of the charger,
• The extension cord is properly wired and in good electrical condition, and
• The cord size is 18 AWG for lengths up to 100 feet, and 16 AWG for
lengths up to 150 feet.
10. The supply cord of this charger cannot be replaced. If the cord is damaged,
call Motorola Product Services at 1-800-353-2729 in the USA or 1-888-390-
6456 TTY (Text Telephone).
1042b60o.book Page 10 Monday, October 28, 2002 5:03 PM

11
FCC Licensing Information
FCC Licensing Information
Your Motorola radio operates on General Mobile Radio Service (GMRS) frequencies
and is subject to the Rules and Regulations of the Federal Communications
Commission (FCC). The FCC requires that all operators using General Mobile Radio
Service (GMRS) frequencies obtain a radio license before operating their equipment. To
obtain the FCC forms please request Forms 605 and 159 which includes all forms and
instructions. If you wish to have the document faxed, mailed or have questions, please
use the following contact information.
Changes or modifications not expressly approved by Motorola may void the user’s
authority granted by the FCC to operate this radio and should not be made. To
comply with FCC requirements, transmitter adjustments should be made only by or
under the supervision of a person certified as technically qualified to perform
transmitter maintenance and repairs in the private land mobile and fixed services as
certified by an organization representative of the user of those services.
Replacement of any transmitter component (crystal, semiconductor, etc.) not
authorized by the FCC equipment authorization for this radio could violate FCC rules.
Note: Use of this radio outside the country where it was intended to be distributed is
subject to government regulations and may be prohibited.
Faxed
Contact the Fax-On-
Demand system at:
Mailed
Call the FCC forms
hotline at:
Questions
Regarding FCC license
Contact the FCC at:
1-202-418-0177 1-800-418-FORM
1-800-418-3676
1-888-CALL-FCC
1-888-225-5322
Or: http://www.fcc.gov
6864110r06b.book Page 11 Thursday, October 17, 2002 12:27 PM

11
Control Buttons - T5600, T5700
Preliminary
Control Buttons - T5600, T5700
Use P to:
• Turn power on/off
• Adjust volume
Use M to:
• Talk
• Save a setting
Use ‰ to:
• Transmit call tone
Use \to:
• Lock the keypad (when
held down and not in a
menu)
• Exit the menu
(when pressed while in
a menu)
LED Indicator Light
Display
Accessory Jack
Use
Q to:
• Monitor channel activity
Use [ ] to:
• Scroll through menus
Microphone
Speaker
1042b60o.book Page 11 Monday, October 28, 2002 5:03 PM

12
Preliminary
Control Buttons - T5620, T5710, T5720
Control Buttons - T5620, T5710, T5720
Use P to:
• Turn power on/off
• Adjust volume
LED Indicator Light
Use
M to:
• Talk on the radio
• Save a setting
Use ^ to:
• Transmit call tone
Removable Front Cover
Speaker
Use
\ to:
• Lock the keypad
(when held down and not
in a menu)
• Exit the menu (when
pressed while in a menu)
Accessory Jack Cover
Use
Q(T5320 and
T5420)
or J(T5410) to:
• Monitor Channel Activity
Use [ ] to:
• Scroll through menus
Microphone
1042b60o.book Page 12 Monday, October 28, 2002 5:03 PM

13
Getting Started
Preliminary
Getting Started
Installing the Batteries
Your radio uses 3 AA Alkaline batteries. The T5600, T5700, T5710, and T5720 model
radios can also use a NiCd rechargeable battery. A rechargeable upgrade kit, model
number 53614, is available for these radios. For the dealer nearest you, call 1-800-
353-2729 (USA), or visit our website at:
www.motorola.com/talkabout
AA Batteries
1. With the back of the radio facing you, lift the battery latch up to release the
battery cover.
2. Lift the cover off.
3. Insert 3 AA Alkaline batteries, making sure to insert the batteries to match the +
and - polarity markings in the battery compartment.
4. Reposition the battery cover and press down to secure.
NiCd Battery
Do not disassemble or unwrap the battery pack.
1. Follow steps 1 and 2 above.
2. Remove the battery pack from the clear plastic bag.
3. Insert the NiCd battery pack as shown. The metal contacts
on the side of the battery must be facing outwards from
the radio to connect with the contacts on the battery door.
1042b60o.book Page 13 Monday, October 28, 2002 5:03 PM

14
Preliminary
Getting Started
4. Reposition the battery cover and press down to secure.
Battery Meter
The battery meter in the upper left corner of the display indicates the battery level.
The radio powers off when the voltage drops below a predetermined level to protect
the rechargeable battery. When the battery meter is an empty shell (a), the radio
chirps periodically after releasing M.
Battery Life
The following chart lists the appropriate battery life during typical two-way use* for
AA Alkaline and NiCd batteries.
*Two-way use is defined as 90% standby time, 5% talk time, and 5% receive time.
Note: Remove the batteries before storing your radio for extended periods of time.
Batteries corrode over time and may cause permanent damage to your radio.
Note: When moving between hot and cold environments, do not charge the battery
until the battery temperature acclimates (usually about 20 minutes).
Battery Type Two-way Use*
AA Alkaline 27 Hours
NiCd 12 Hours
1042b60o.book Page 14 Monday, October 28, 2002 5:03 PM

15
Getting Started
Preliminary
Charging Desk Stand (Optional Accessory)
The charging desk stand provides drop-in charging convenience. The charging dock
can be placed on any flat surface, such as a desk or workbench. Charge the NiCd
battery overnight (at least 16 hours) before using it for the first time.
1. With the radio off, remove the battery cover.
2. Remove the battery pack from the clear plastic bag.
3. Insert the battery pack as indicated on the battery pack label. The metal contacts
on the side of the battery must be facing outwards from the radio to connect with
the contacts on the battery door. Do not disassemble or unwrap the battery
pack.
4. Replace the battery cover.
5. Plug the wire on the AC power supply into the plug on the desk stand.
6. Plug the AC power supply into a standard wall outlet.
7. Slide the radio into one of the desk stand charging pockets facing forward. The
red light glows when the radio is properly inserted.
After the initial battery charge, the battery is fully charged within 14 hours.
To charge the battery pack separately from the radio:
1. Remove the battery pack from the clear plastic bag.
2. Insert the battery pack into the desk stand charging pocket using the pocket
insert provided. Do not disassemble or unwrap the battery pack.
1042b60o.book Page 15 Monday, October 28, 2002 5:03 PM

16
Preliminary
Getting Started
3. Plug the wire on the AC power supply into the plug on the desk stand.
4. Plug the AC power supply into a standard wall outlet. The red light glows when
the battery is properly inserted.
After the initial battery charge, the battery is fully charged within 14 hours.
Charging Status
The solid red light indicator shows that the radio and/or the NiCd battery are charging.
Note: When moving between hot and cold environments, do not charge the battery
until the battery temperature acclimates (usually about 20 minutes).
Note: For optimal battery life, remove the radio or battery from the charger within
16 hours. Do not store the radio in the charger.
After the initial battery charge, when 2 depleted batteries are placed in the charger,
they will be fully recharged within 14 hours.
Turning Your Radio On and Off
Tu r n Pclockwise to turn the radio on and counterclockwise to turn the radio off.
The radio chirps and the display briefly shows all feature icons available on your
radio. The display then toggles through the available channels and Interference
Eliminator Codes.
1042b60o.book Page 16 Monday, October 28, 2002 5:03 PM

17
Getting Started
Preliminary
Setting the Volume
Rotate Pwhile holding down Qor Juntil you reach a comfortable listening
level. Rotate Pclockwise to increase the volume or counterclockwise to decrease
the volume.
Setting a Channel
Your radio has 22 channels.
When the radio is on a 1 watt channel, zis displayed.
When the radio is on a 0.5 watt channel, yis displayed.
To set the channel:
1. With the radio on, press \or \. The current channel begins to flash.
2. Use [and ]to change the channel while it is flashing.
3. Press Mto set the new channel.
Channel Numbers Description Transmit Power
Channels 1-7 GMRS Interstitial 1-7
Also FRS 1-7 1 watt
Channels 8-14 FRS 8-14 0.5 watt
Channels 15-22 GMRS Primary 1-8 1 watt
1042b60o.book Page 17 Monday, October 28, 2002 5:03 PM

18
Preliminary
Talking and Listening
Talking and Listening
To communicate, all radios in your group must be set to the same channel and
Interference Eliminator Code.
• To maximize clarity, hold the radio 2 to 3 inches away from your mouth.
• Press and hold M(Push To Talk) and speak into the microphone.
The LED indicator light glows continuously when transmitting.
• To receive messages, release M.
Monitor Button
Pressing and holding Qallows you to listen to the volume level of the radio when
you are not receiving. This allows you to adjust the volume, if necessary. You can
also use Qto check for activity on the current channel before you transmit (talk).
1042b60o.book Page 18 Monday, October 28, 2002 5:03 PM