Mount-n-Lock 4SQUARE RV Bumper Cargo Carrier Tray User manual

RV Bumper Cargo Carrier Tray Installation Guide
CONFIDENTIAL AND PROPRIETARY INFORMATION
© Copyright 2014 BetterBilt Solutions LLC. All Rights Reserved. Patents Pending.
Thank you for your purchase of 4SQUARE™RV Bumper Cargo Carrier Tray. This guide will walk you
through the steps needed to securely install the Cargo Carrier Tray on your 4-inch square bumper.
Step 1: Slide tray (1) onto bumper (2) using large fasteners (4) to secure in place, positioning tray (1) so
that frame rails (3) don’t interfere with large fasteners (4).

RV Bumper Cargo Carrier Tray Installation Guide
CONFIDENTIAL AND PROPRIETARY INFORMATION
© Copyright 2014 BetterBilt Solutions LLC. All Rights Reserved. Patents Pending.
Step 2: Attach sides by inserting tabs (5) into slots (6) for flat sides (7) and attach using small fasteners
(10). For angled side (9), put tabs (8) under tray (1) platform and attach using small fasteners (10).
That’s all there is to it! Enjoy your original 4SQUARE™RV Bumper Cargo Carrier Tray!