Brodit ProClip 853901 User manual

24 February, 2014, www.brodit.com, © 2014 Brodit AB
Product 853901
853901 ProClip
NOT for models with navigation.
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288539010
Item no 853901 fits:
Saab 9-3 09-11 (For all countries)
Saab 9-3 07-08 (For all countries)
1(2)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
It is important to place the ProClip in the exact same position as shown in the pictures.
1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the
control panel, to widen the gap. Peel off the cover of the adhesive tape on the ProClip. Press the curved edge on
the lower part of the ProClip into the gap next to the gap opener.
2. Flip the ProClip upward/forward so the curved lower edge hooks behind the control panel
3. Hook the angled edge on the upper part of the ProClip over the edge of the dashboard. Press downward on
top of the ProClip so the angled edge hooks properly into place and the adhesive tape attaches. Pull out the gap
opener.
4. The ProClip is in place.
2(2)