Mountup MU0045 User manual

10.39~17.32"
264~440mm
0.79~2.76"
20~70mm
12.36~17.72"
314~450mm
75×75mm / 3×3"
100×100mm / 4×4"
MAX:
17.6 lbs (8 kg)
Load
Capacity
Height: 264~440mm
Thickness: 20~70mm
Screen
Do not use
adapter vertically
At least
two people install
1 2
CHOKING HAZARD
Non-VESA Adapter
Installation Instruction DWD1430_V2.0
A (x1)
Bracket
B (x2)
Bracket
C (x12)
Spacer
D (x3)
Knob Nut
E (x3)
Brace
F (x1)
Wrench
PACKAGE CONTENTS
BEFORE ASSEMBLY
● Please check and make sure all necessary accessories are included and undamaged.
● Please read and understand this manual carefully before installation.
WARNING
● This product contains small items that could be a choking hazard if swallowed.
KEEP AWAY FROM CHILDREN UNDER 3 YEARS OLD. ADULT SUPERVISION IS REQUIRED.
● Improper installation, such as using the product for monitors over its load capacity or for any purpose not explicitly
specified, may cause damage or serious injury. We would not be liable for any damage or injury mounting or caused
by improper inappropriate use.
● At least two people are required to install this product.
● The weight of your screen DO NOT EXCEED 17.6 lbs (8kg).
CAUTION AND MAINTENANCE
● Do not use this adapter vertically.
● Never allow children to climb, stand, hang, or play on any part of screen or adapter.
● Check that the bracket is secure and safe to use at regular intervals (at least every three months).
WARNING
If you have any questions, please feel free to contact Customer Service Via Amazon before returning.
1

STEP 1
STEP 2
STEP 3
STEP 4
100mm
75mm
H1 = 264~372mm
H2 = 281~389mm
H3 = 298~406mm
H4 = 315~423mm
H5 = 332~440mm
Screen Thickness
T: 20~70mm
Screen Thickness Amount of Spacer
T ≤ 30mm
30mm < T ≤ 40mm
40mm < T ≤ 50mm
50mm < T ≤ 60mm
60mm < T ≤ 70mm
0 pcs
1 pcs
2 pcs
3 pcs
4 pcs
Screen Height
H: 264~440mm
108mm
Attach and screw the
Bracket to VESA plate
with Wrench.
Loose the screws on
the Bracket and adjust
Extension Bar to fit
your screen height.
Choose the amount of Spacer
suitable for the screen thickness,
then assemble the Braces to
Extension Bar.
Tighten
Tighten
ATTENTION:
Move top bracket upward, and
use upper holes on VESA plate
when Key Holes installation.
NOTE: Five choices
for height adjustment.
(For your reference)
NOTE: Five choices for
thickness adjustment.
(For your reference)
Tighten
Hang screen to the
adapter, then fix and
fasten the kit to screen.
2
ASSEMBLY STEPS