Mountup MU9101B User manual

1 2
Soundbar Wall Mount
Instruction Manual
YZ-A01_US1.0
◆Don't allow children to climb, stand, hang, or play on any part of mount.
◆This product is intended for indoor use only. Using this product outdoors could lead to product failure
and personal injury.
◆Incorrect installation may result in product damage or body injury.
◆Check that the bracket is secure and safe to use at regular intervals (at least every three months).
CAUTION AND MAINTENANCE:
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or
damaged, do not return the damaged item to your dealer; please contact our customer service team.
Never use damaged parts!
If you have any questions, please feel free to contact us via Amazon.
WIDTH
WIDTH
2-5 in.
(51-127mm)
2-5 in.
(51-127mm)
With threaded inserts
1: Bottom Mounted 2: Shelf-style
(threaded inserts on the back
or no threaded inserts)
Min. 3/4 in
(19mm)
Note:The facet of
washer should
be upward
Note:Don’t over-tighten
the lag bolt
Hanging Templete
0
0
WIDTH
Hanging Templete
0
0
Installation Tools (Not Included)
Band
Tape
2M
Screwdriver
Pencil Electro drill
Stud
Finder
Hammer
Awl Masonry
Drill Bit
5/16"
(8mm)
Determine your install method
Option A For drywall
1. Please expand the Template , level the template
on the drywall.Then mark the position you want
according to the width of the previous step.
2. Install the drywall anchors with the hammer
and screwdriver.
3. Install the plastic washers using the lag bolts
with screwdriver,NO Electro drill.
Supplied Parts and Hardware
Soundbar Screws Soundbar
Washers
M6 x 16mm M4 x 16mm
Leveling Screws
M4 x 20mm M5 x 16mm Ø 6 mm
B
×2
A
qty. 2 each
×2
×3
1
Bracket with Pad
×3
4
×1
6
×1
5Template
Plastic
Washers
Bubble level
×3
7×2
8
Lag Bolt ST3.8x50mm
Note:Not all hardware included will be used.
For Concrete installations ONLY
Concrete Anchor
DO NOT use in drywall or wood
3
×3
For Drywall installations ONLY
Drywall Anchor
DO NOT use in concrete or wood
2
Step 1 Install plastic washers
A-1
A-2
A-3
6
2
47
4
2
6
7
7
Hanging Template
0
0

3 4
WIDTH
Hanging Templete
0
0
Hanging Templete
0
0
12”(305mm)/16”(406mm)
18”(457mm)/24”(610mm)
Note:The facet of washer
should be upward
Note:Don’t over-tighten the lag bolt
Note:Don’t touch the washer
Remove the film of the adhesive
Note:Don’t over-tighten
the lag bolt
Min. 4 in
(101mm)
Hanging Templete
0
0
WIDTH
Hanging Templete
0
0
5/16 in
(8mm)
3 in(76mm)
If the Soundbar is not level after installing, please find the bracket on the lowerside and turn
the leveling screw clockwise on the bracket to level the soundbar by useing the screwdriver.
Horizontal line
Step 1 Continue
Option B For wood studs (12” or 16” or 18” or 24”)
Option C For solid concrete wall or brick wall
1-1. Locate your studs. Verify and mark the center of the stud by finding the stud edges
using a Awl or an edge to edge stud finder.
1-2. Please expand the Template , level the template, find the 12”/16"/18”/24" hole,
then mark it.
2. Install the plastic washers using the lag bolts with screwdriver,NO Electro drill.
1. Attach the bracket on the
plastic washer by keyhole.
2. Install the leveling screw with
screwdriver,NO Electrodrill.
Note: Don’t touch the washer.
Step 2 Install bracket
Step 3 Install soundbar
Option: Adjust the leveling screws on the brackets to level the soundbar
Secure (OPTIONAL —For Bottom Mounted Only)
Secure (OPTIONAL — For Shelf style)
Power up
Watch the
level during
adjusting.
Maximum
leveling
adjustment
10mm
1. Please expand the Template , level the template
on the wall.Then mark the position you want
according to the width of the previous step.
2. Drill pilot holes.
3. Install the concrete anchors with the hammer.
4. Install the plastic washers using the lag bolts
with screwdriver,NO Electro drill.
6
3
7
4
6
7
4
Note:The facet of
washer should
be upward
B-1
B-2
1
A
B
1
4
4
8
1
A
B
1
1
1
C-3
C-1 C-2
C-4
1
8
3
4
4
6
6
7
7
7