Moxa Technologies VPort 36-1MP User manual

Moxa VPort 36-1MP Rugged IP Camera
User’s Manual
Third Edition, December 2012
www.moxa.com/product
© 2012 Moxa Inc. All rights reserved.
Fl.4, No. 135, Lane 235, Baoqiao Rd. Xindian Dist.,
New Taipei City. Taiwan
3093014000002 V 1.0

Moxa VPort 36-1MP Rugged IP Camera
User’s Manual
The software described in this manual is furnished under a license agreement and may be used only in accordance with
the terms of that agreement.
Copyright Notice
© 2012 Moxa Inc. All rights reserved.
Trademarks
The MOXA logo is a registered trademark of Moxa Inc.
All other trademarks or registered marks in this manual belong to their respective manufacturers.
Disclaimer
Information in this document is subject to change without notice and does not represent a commitment on the part of
Moxa.
Moxa provides this document as is, without warranty of any kind, either expressed or implied, including, but not limited
to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this manual, or to the
products and/or the programs described in this manual, at any time.
Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no responsibility for
its use, or for any infringements on the rights of third parties that may result from its use.
This product might include unintentional technical or typographical errors. Changes are periodically made to the
information herein to correct such errors, and these changes are incorporated into new editions of the publication.
Technical Support Contact Information
www.moxa.com/support
Moxa Americas
Toll
-free: 1-888-669-2872
Tel:
[phone]
Fax:
[phone]
Moxa China (Shanghai office)
Toll
-free: 800-820-5036
Tel:
[phone]
Fax:
[phone]
Moxa Europe
Tel:
[phone]
Fax:
[phone]
Moxa Asia
-Pacific
Tel:
[phone]
Fax:
[phone]

Before Getting Started
Before using your VPort 36-1MP, please pay close attention to the following instructions:
After opening the VPort 36-1MP box, compare the contents of the box with the Package Checklist in Chapter 1.
Notify your sales representative if any of the items are missing or damaged.
To prevent damage or problems caused by improper use, read the Quick Installation Guide (the printed handbook
included in the package) before assembling and operating the device and peripherals. You may also refer to Chapter
1, under Product Description, and all of Chapter 2, of this manual.
The VPort 26 IP Camera has been designed for a variety of environments and can be used to build various applications
for general security or demonstration purposes. For standard applications, refer Chapter 2, Getting Started, and
Chapter 3, Accessing the VPort 36-1MP Web-based Manager.
Important Note
Surveillance devices may be prohibited by law in your country. Since the VPort is both a high performance surveillance
system and networked video server, verify that the operations of such devices are legal in your locality before
installing this unit for surveillance purposes.

Table of Contents
Before Getting Started ........................................................................................................................1-3
Important Note ..................................................................................................................................1-3
1. Introduction...................................................................................................................................... 1-1
Overview ...........................................................................................................................................1-2
Package Checklist ...............................................................................................................................1-2
Product Features ................................................................................................................................1-3
Typical Applications.............................................................................................................................1-4
Product Description.............................................................................................................................1-5
2. Getting Started ................................................................................................................................. 2-1
Before Getting Started ........................................................................................................................2-2
First-Time Installation and Configuration ...............................................................................................2-2
Hardware Installation...................................................................................................................2-2
Software Installation....................................................................................................................2-4
VPort 36-1MP Dimensions ....................................................................................................................2-7
Wiring Requirements...........................................................................................................................2-8
3. Accessing the VPort’s Web-based Manager ....................................................................................... 3-1
Functions Featured on the VPort’s Web Homepage..................................................................................3-2
VPort’s Information .....................................................................................................................3-2
IP Camera Name .........................................................................................................................3-2
Camera Image View ....................................................................................................................3-2
Client Settings ............................................................................................................................3-3
System Configuration ..................................................................................................................3-3
Video Information .......................................................................................................................3-3
4. System Configuration........................................................................................................................ 4-1
System Configuration by Web Console ..................................................................................................4-2
System ......................................................................................................................................4-3
General Settings ..................................................................................................................4-3
Account Privileges ................................................................................................................4-4
Local Storage ......................................................................................................................4-5
System Log History ..............................................................................................................4-6
System Parameters ..............................................................................................................4-7
Firmware Upgrade ...............................................................................................................4-8
Reset to Factory Default .......................................................................................................4-8
Reboot ...............................................................................................................................4-8
Network .....................................................................................................................................4-9
General Network Settings .....................................................................................................4-9
SMTP Server and Email Account Settings .............................................................................. 4-14
Dynamic DNS .................................................................................................................... 4-15
Universal PnP .................................................................................................................... 4-15
QoS (ToS)......................................................................................................................... 4-16
FTP Server Settings............................................................................................................ 4-16
Multicast ........................................................................................................................... 4-17
Configuring Multicast Settings ............................................................................................. 4-18
HTTP Event Server ............................................................................................................. 4-19
Accessible IP List ............................................................................................................... 4-20
SNMP ............................................................................................................................... 4-21
Configuring SNMP Settings.................................................................................................. 4-21
Modbus/TCP ...................................................................................................................... 4-23
IEEE 802.1X...................................................................................................................... 4-23
Telnet............................................................................................................................... 4-24
LLDP ................................................................................................................................ 4-24
Video ....................................................................................................................................... 4-24
Image Settings .................................................................................................................. 4-24
Image Tuning .................................................................................................................... 4-25
ROI (Region of Interest) ..................................................................................................... 4-27
Privacy Mask ..................................................................................................................... 4-28
Camera Modulation ............................................................................................................ 4-28
Video Performance ............................................................................................................. 4-29
PTZ ......................................................................................................................................... 4-31
Digital PTZ ........................................................................................................................ 4-31
DynaStreamTM........................................................................................................................... 4-32
Basic ................................................................................................................................ 4-33
Conditions......................................................................................................................... 4-33
Alarm ...................................................................................................................................... 4-34
System Alarm.................................................................................................................... 4-34
Basic ................................................................................................................................ 4-34
Schedule........................................................................................................................... 4-36

Event Alarm ...................................................................................................................... 4-37
Digital Input ...................................................................................................................... 4-38
Video Motion Detection ....................................................................................................... 4-39
CGI Event ......................................................................................................................... 4-41
Camera Tamper................................................................................................................. 4-42
IVA Event ........................................................................................................................................ 4-43
IVA Function .................................................................................................................................... 4-44
Getting Started ......................................................................................................................... 4-44
Using IVA Functions for the First Time ......................................................................................... 4-44
Configuring IVA Alert ................................................................................................................. 4-46
A. Frequently Asked Questions.............................................................................................................. A-1
B. Modbus Address Table ...................................................................................................................... B-1
C. Time Zone Table................................................................................................................................ C-1
D. Technical Specifications .................................................................................................................... D-1

1
1. Introduction
The VPort 36-1MP is a rugged HD resolution (720P) box type IP camera designed for use in harsh environments.
In addition to being able to handle basic video feeds, many advanced features are also included to set up
surveillance or web multimedia applications. The VPort 36-1MP is designed to provide stability, robustness,
ease-of-use, and flexibility.
The following topics are covered in this chapter:

Overview

Package Checklist

Product Features

Typical Applications

Product Description

VPort 36-1MP Introduction
1-2
Overview
Rugged Design
The VPort 36-1MP series is the world’s first rugged IP camera that can withstand environmental temperatures
ranging from -40 to 75°C without a heater or cooling fan. It is an industrial-grade, H.264 box-type IP camera
that combines HD resolution (1280 x 720), advanced IVA (Intelligent Video Analysis) technology, and de-mist
technology to enhance surveillance system efficiency while delivering state-of-the-art video quality. Optional
housing and PT scanner accessories are available for indoor and outdoor installation.
Superb Video Quality
The VPort 36-1MP series supports a variety of lenses for any application and is designed to be compatible with
C/CS mount lenses to meet any viewing angle and distance requirement. With a built-in removable IR-cut filter
and automatic color mode switching, the VPort 36-1MP Series is suitable for day-and-night use. Highly-tuned
ROI (Region of Interest), and WDR (Wide Dynamic Range) functions enable the VPort 36-1MP series to produce
exceptionally clear images. The optional de-mist function ensures the best image quality in rainy, snowy, or
hazy environments.
Convenient Installation
The VPort 36-1MP series is designed for indoor and outdoor applications that require operational reliability. It
is a unique and competitive camera in the IP CCTV market, with features such as high EMI/surge protection,
optional IP66 housing for rain/dust protection, and -40 to 75°C operation without requiring a heater or cooling
fan. This camera is available with PoE (Power over Ethernet, 802.3af) or with wired power input supporting
12/24 VDC or 24 VAC.
High Video Performance and Network Security
The VPort 36-1MP series can encode analog video into both H.264 and MJPEG video streams and can transmit
up to 3 independent video streams (2 in H.264, and 1 in MJPEG) simultaneously. Advanced video encoding
technology enables the camera to support up to 30 FPS for each of the H.264 and MJPEG streams. Advanced
network security functions, such as 802.1x and SSL/SSH, are also provided to prevent unauthorized access or
data hijacking, a critical feature for many surveillance applications.
Package Checklist
Moxa’s VPort 36-1MP Series is shipped with the following items. If any of these items is missing or damaged,
please contact your customer service representative for assistance.
•1 × VPort 36-1MP (one of following models)
Standard model Description
VPort 36-1MP VPort 36-1MP, POE, 0 to 60°C operating temperature
VPort 36-1MP-T VPort 36-1MP, POE, -40 to 75°C operating temperature
VPort 36-1MP-IVA VPort 36-1MP, POE, 0 to 60°C operating temperature, 1 IVA license
VPort 36-1MP-IVA-T VPort 36-1MP, POE, -40 to 75°C operating temperature, 1 IVA license
VPort 36-1MP-DM VPort 36-1MP, POE, 0 to 60°C operating temperature, de-mist function

VPort 36-1MP Introduction
1-3
•Screw handle accessory package
Inner hexagon screw driver for
tightening/loosening lens holder
C/CS mount adapter ring 5-
pin terminal block for DI and
relay
3-pin terminal block for power
input
2-pin terminal block for RS-485 DX+
and DX-
•Quick installation guide
•Documentation and software CD (includes User’s Manual, Quick Installation Guide, and VPort Utility)
•Warranty card
NOTE: Notify your sales representative if any of the above items are missing or damaged.
NOTE
Check the model name on the VPort’s side label to determin
e if the model name is correct for your order.
NOTE
This product must be installed in compliance with your local laws and regulations.
Product Features
•Sensor: 1/2.7” HD progressive scan CMOS
•Lens: C/CS mount lens (lens not included)
•Auto Iris Type: DC drive (Not for Hazardous Location)
•Illumination (low light sensitivity):
Color: 0.2 lux at F1.2
B/W: 0.05 lux at F1.2
•Synchronization: Internal
•Gamma Correction: 0.45 or 1.0 (default 0.45)
•White Balance: ATW/AWB (range: 3200 to 10000°K)
•Dynamic Range: Color: 100 dB; B/W: 110 dB
•Auto Electronic Shutter: 1/30 to 1/25000 sec.
•S/N Ratio: 50 dB (Gamma, Aperture, AGC OFF; DNR ON)
•ICR Control: Auto (light sensor control) or DI control
•DNR: Built-in DNR
•WDR: On/Off
•AGC Control: On/Off
•Flickerless Control: On/Off
•Auto Exposure: -5 to +5 level
•Image Rotation: Flip, Mirror, and 180° rotation
•Image Setting: Manual tuning with brightness, saturation, contrast, and sharpness

VPort 36-1MP Introduction
1-4
•Video Compression: H.264 (ISO/IEC 14496-10) or MJPEG
•Video Outputs: Ethernet
•Video Streams: Up to 3 video streams (2 x H.264 and 1 x MJPEG)
Stream 1: H.264, 1280 x 720 resolution (max.)
Stream 2: H.264, 720 x 480 resolution (max.)
Stream 3: MJPEG, 720 x 480 resolution (max.)
NOTE: Streams 2 and 3 must be at the same resolution
•Video Motion Detection: 3 independently configurable motion areas
•Scheduling: Daily repeat timing schedule
•Imaging: JPEG snapshots for pre/trigger/post alarm images
•Video Recording: Event recording, stored on the SD card
•Email/FTP Messaging: Automatic transfer of stored images via email or FTP when alerted
•Custom Alarms: HTTP event servers for setting customized alarm actions
•Pre-alarm Buffer: 24 MB video buffer for JPEG snapshot images
•Advance Software Feature:
DynaStream™ support for automatic adjustment of frame rate
3 privacy mask areas provided
ROI (Region of Interest) configuration for up to 3 areas
•Safety: UL 60950-1, EN 50121-4, NEMA TS2, Class 1 Division 2, ATEX Zone 2, Ex nA nC IIC T4 Gc
•EMI: FCC Part 15, CISPR (EN 55022) class A
•EMS: EN 61000-4-2 (ESD), Level 3 EN 61000-4-3 (RS), Level 3 EN 61000-4-4 (EFT), Level 3 EN 61000-4-5
(Surge), Level 3 EN 61000-4-6 (CS), Level 3 EN 61000-4-8, EN 61000-4-11
•Shock: IEC 60068-2-27
•Freefall: IEC 60068-2-32
•Vibration: IEC 60068-2-6
•Warranty: 3-year warranty
NOTE
If you are intereste
d in Moxa’s VPORT SDK PLUS, please go to Moxa’s website www.moxa.com
to download the
package, or contact a Moxa sales representative for more information about this SDK.
Typical Applications
With the industrial grade design and specifications, the VPort 36-1MP is suitable for both mission critical
applications and general purpose surveillance systems, including the following:
•ITS (Intelligent Transportation System)
•City surveillance
•Railway wayside surveillance
•Railway station surveillance
•Industrial automation surveillance
•Oil & Gas facility surveillance
•Mining facility surveillance

VPort 36-1MP Introduction
1-5
Product Description
Top View
Bottom View
NOTE
The product is shipped with the mounting bracket fastened to the bottom of the camera. However,
the bracket
can be removed and repositioned to the top of the camera, depending on your deployment requirements.
•Auto Iris Socket: Plug the auto-iris cable from the camera lens into this socket to use the auto-iris function
•Lens Holder: The lens holder is designed for CS mount lenses; a C/CS adaptor is required if you want to
use C mount lenses. More details can be found in the HW installation section of this manual.
•SD Card Slot: You can remove the SD card slot cover and insert an SD card for disconnection/event local
storage.
•Mounting Bracket Screw Hole: Screw holes for fastening the mounting bracket.
•Reset Button: Use a pointed object to push in the reset button. Press and release to reboot, or press and
hold until the system reboots to load factory defaults.
•Auto-iris cable is not permitted to be used in Hazardous Location

VPort 36-1MP Introduction
1-6
Back Panel View
1. 5-pin terminal block for DI and relay connection
2. 2-pin terminal block for RS-485 pin connection
3. RJ45 port for PoE/non-PoE connection
4. Ground screw for connecting the grounding wire
5. 3-pin terminal block for the power input
6. LED indicator to show network and system status. Green indicates normal operation.
7. LED indicator to show power status. Green indicates normal operation.
NOTE
The VPort 36
-1MP can be powered by a 12 VDC, 24 VDC, or 24 VAC input, or Power over Ethernet (PoE,
802.3af). For power redundancy, use DC or AC power together with PoE.

2
2. Getting Started
This chapter includes information about how to install a VPort 36-1MP IP camera.
The following topics are covered in this chapter:

Before Getting Started

First-Time Installation and Configuration
Hardware Installation
Software Installation

VPort 36-1MP Dimensions

Wiring Requirements

VPort 36-1MP Getting Started
2-2
Before Getting Started
In what follows, “user” refers to those who can access the IP camera, and “administrator” refers to the person
who knows the root password, which allows making changes to the IP camera’s configuration and obtaining
general access. Administrators should read this part of the manual carefully, especially during installation.
First-Time Installation and Configuration
Hardware Installation
Step 1: Remove lens cover
Step 2: Loosen the lens holder pressing screw with the torx screw driver.

VPort 36-1MP Getting Started
2-3
Step 3: Remove the lens holder.
NOTE
Be sure to loosen the screw affixing the lens holder in step 2 before trying to remove the lens
holder. The lens
holder may be too tight to loosen if the screw is not loosened first.
Step 4: Screw the lens holder to the lens you are going to use.
NOTE
Be sure to screw the lens holder to the lens on the right side. The side of the lens holder with the groove should
be facing the lens; the side without the groove should be facing outwards.
Step 5: Screw lens and lens holder to the VPort 36-1MP.
NOTE
We strongly suggest that you perform this step while viewing live video from the camera via a web browser for
instant feedback on when to stop. Be sure not to tighten the screw all the way, or the lens holder may remain
fixed to the camera when you remove the lens.
NOTE
You can
use the lens holder pressing screw in step 2 to fix the position of lens holder and lens.
However,
make sure you do not screw the lens all the way down
, since doing so could obstruct the ICR
filter when switching between day and night modes.
NOTE
You do not need to use the C/CS mount adaptor ring if you are using the VPor
t 36-
1MP series with an optional
lens purchased from Moxa. It is only required to mount the lens with the adaptor ring if you are using a C mount
type lens.
Step 6: Power on your VPort 36-1MP.
NOTE
The VPort 36
-1MP can be powered by a 12 VDC, 24 VDC, or 24 VAC input, or Power over Ethernet (PoE,
802.3af). For power redundancy, use DC or AC power together with PoE.
Groove

VPort 36-1MP Getting Started
2-4
Software Installation
Step 1: Configure the VPort 36-1MP’s IP address.
When the VPort 36-1MP is first powered on, the POST (Power On Self Test) will run for a few moments (about
30 seconds). The network environment determines how the IP address is assigned.
Network Environment with DHCP Server
For this network environment, the unit’s IP address will be assigned by the network’s DHCP server. Refer to the
DHCP server’s IP address table to determine the unit’s assigned IP address. You may also use the Moxa VPort
and Ether Device Configurator Utility (edscfgui.exe), as described below:
Using the Moxa VPort and EtherDevice Configurator Utility (edscfgui.exe)
1. Run the edscfgui.exe program to search for the VPort. After the utility’s window opens, you may also click
on the Search button to initiate a search.
2. When the search has been completed, the Model Name, MAC address, IP address, serial port, and HTTP port
of the VPort will be listed in the utility’s window.
3. You can double click the selected VPort, or use the IE web browser to access the VPort’s web-based
manager (web server).
Non DHCP Server Network Environment
If your VPort 36-1MP is connected to a network that does not have a DHCP server, then you will need to
configure the IP address manually. The default IP address of the VPort 36-1MP is 192.168.127.100 and the
default subnet mask is 255.255.255.0. Note that you may need to change your computer’s IP address and
subnet mask so that the computer is on the same subnet as the VPort.
To change the IP address of the VPort manually, access the VPort’s web server, and then navigate to the
System Configuration Network General page to configure the IP address and other network settings.
Check the Use fixed IP address to ensure that the IP address you assign is not deleted each time the VPort
is restarted.
Step 2: Access the VPort 36-1MP’s web-based manager
Type the IP address in the web browser’s address input box and then press enter.

VPort 36-1MP Getting Started
2-5
Step 3: Install the ActiveX Control Plug-in
A security warning message will appear the first time you access the VPort’s web-based manager. The message
is related to installing the VPort AcitveX Control component on your PC or notebook. Click Yes to install this
plug-in to enable the IE web browser for viewing video images.
NOTE
For Windows XP SP2 or above operating systems, the ActiveX Control component will be blocked for system
security reasons. In this case, the
VPort’s security warning message window may not appear. Users should
unlock the ActiveX control blocked function or disable the security configuration to enable the installation of the
VPort’s ActiveX Control component.
Step 4: Access the homepage of VPort 36-1MP’s web-based manager.
After installing the ActiveX Control component, the homepage of the VPort 36-1MP’s web-based manager will
appear. Check the following items to make sure the system was installed properly:
1. Video Images
2. Video Information

VPort 36-1MP Getting Started
2-6
Step 5: Access the VPort’s system configuration.
Click on System Configuration to access the overview of the system configuration to change the
configuration. Model Name, Server Name, IP Address, MAC Address, and Firmware Version appear in
the green bar near the top of the page. Use this information to check the system information and installation.
For details of each configuration, check the User’s Manual on the software CD.

VPort 36-1MP Getting Started
2-7
VPort 36-1MP Dimensions
(Unit=mm)

VPort 36-1MP Getting Started
2-8
Wiring Requirements
SAFETY FIRST
•
Be sure to disconnect the power cord before installing and/or wiring your Moxa VPort 36-1MP.
•
Calculate the maximum possible current in each power wire and common wire. Observe all electrical codes
dictating the maximum current allowable for each wire size.
•
If the current goes above the maximum ratings, the wiring could overheat, causing serious damage to your
equipment.
You should also pay attention to the following:
•Use separate paths to route wiring for power and devices. If power wiring and device wiring paths must
cross make sure the wires are perpendicular at the intersection point.
NOTE: Do not run signal or communications wiring and power wiring in the same wire conduit. To avoid
interference, wires with different signal characteristics should be routed separately.
•You can use the type of signal transmitted through a wire to determine which wires should be kept separate.
The rule of thumb is that wiring that shares similar electrical characteristics can be bundled together.
•Keep input wiring and output wiring separated.
•We strongly advise labeling the wiring to all devices in the system.

3
3. Accessing the VPort’s Web-based Manager
This chapter includes information about how to access the VPort 36-1MP IP camera for the first time.
The following topics are covered in this chapter:

Functions Featured on the VPort’s Web Homepage
VPort’s Information
IP Camera Name
Camera Image View
Client Settings
System Configuration
Video Information