Moxa Technologies AWK-1121 User manual

AirWorks AWK-1121/1127 User’s Manual
Second Edition, April 2014
www.moxa.com/product
© 2014 Moxa Inc. All rights reserved.
Reproduction without permission is prohibited.
www.ipc2u.ru
www.moxa.pro

AirWorks AWK-1121/1127 User’s Manual
The software described in this manual is furnished under a license agreement and may be used only in accordance with
the terms of that agreement.
Copyright Notice
©2014 Moxa Inc. All rights reserved.
Trademarks
The MOXA logo is a registered trademark of Moxa Inc.
All other trademarks or registered marks in this manual belong to their respective manufacturers.
Disclaimer
Information in this document is subject to change without notice and does not represent a commitment on the part of
Moxa.
Moxa provides this document as is, without warranty of any kind, either expressed or implied, including, but not limited
to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this manual, or to the
products and/or the programs described in this manual, at any time.
Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no responsibility for
its use, or for any infringements on the rights of third parties that may result from its use.
This product might include unintentional technical or typographical errors. Changes are periodically made to the
information herein to correct such errors, and these changes are incorporated into new editions of the publication.
Technical Support Contact Information
www.moxa.com/support
Moxa Americas
Toll
-free: 1-888-669-2872
Tel:
[phone]
Fax:
[phone]
Moxa China (Shanghai office)
Tel:
[phone]
Fax:
[phone]
Moxa Europe
Tel:
[phone]
Fax:
[phone]
Moxa Asia
-Pacific
Tel:
[phone]
Fax:
[phone]
www.ipc2u.ru
www.moxa.pro

Table of Contents
1. Introduction...................................................................................................................................... 1-1
Overview...........................................................................................................................................1-2
Package Checklist...............................................................................................................................1-2
Product Features ................................................................................................................................1-2
Product Specifications .........................................................................................................................1-3
Functional Design ...............................................................................................................................1-5
LED Indicators ............................................................................................................................1-5
Beeper.......................................................................................................................................1-5
Reset Button...............................................................................................................................1-6
2. Getting Started.................................................................................................................................. 2-1
First-time Installation and Configuration................................................................................................2-2
Function Map .....................................................................................................................................2-4
3. Web Console Configuration ............................................................................................................... 3-1
Web Browser Configuration..................................................................................................................3-2
Overview...........................................................................................................................................3-3
Basic Settings ....................................................................................................................................3-4
System Info Settings ...................................................................................................................3-4
Network Settings.........................................................................................................................3-4
Time Settings .............................................................................................................................3-5
Wireless Settings................................................................................................................................3-6
Operation Mode...........................................................................................................................3-7
WLAN ........................................................................................................................................3-7
Advanced Settings ............................................................................................................................3-16
Packet Filters............................................................................................................................3-17
SNMP Agent.............................................................................................................................. 3-19
Link Fault Pass-Through............................................................................................................. 3-21
Serial Port Settings (AWK-1127 Only) .................................................................................................3-21
Operation Modes.......................................................................................................................3-22
Communication Parameters........................................................................................................3-40
Data Buffering/Log ....................................................................................................................3-42
Auto Warning Settings.......................................................................................................................3-42
System Log ..............................................................................................................................3-43
Syslog .....................................................................................................................................3-44
E-mail......................................................................................................................................3-45
Trap ........................................................................................................................................3-46
Status .............................................................................................................................................3-47
Wireless Status.........................................................................................................................3-47
System Log ..............................................................................................................................3-48
Serial Data Log (AWK-1127 Only)................................................................................................3-48
Power Status ............................................................................................................................ 3-48
Maintenance ....................................................................................................................................3-49
Console Settings .......................................................................................................................3-49
Ping.........................................................................................................................................3-49
Firmware Upgrade.....................................................................................................................3-50
Config Import/Export.................................................................................................................3-50
Loading Factory Defaults............................................................................................................3-51
Password..................................................................................................................................3-51
Misc. Settings ...........................................................................................................................3-52
Save Configuration ........................................................................................................................... 3-52
Restart............................................................................................................................................3-53
Logout.............................................................................................................................................3-53
4. Software Installation and Configuration ........................................................................................... 4-1
Overview...........................................................................................................................................4-2
AWK Search Utility..............................................................................................................................4-2
Installing AWK Search Utility ........................................................................................................4-2
Configuring the AWK Search Utility................................................................................................4-4
OnCell Windows Driver Manager ...........................................................................................................4-8
Installing OnCell Windows Driver Manager......................................................................................4-8
Using OnCell Windows Driver Manager.........................................................................................4-10
Moxa OnCell Linux Real TTY Driver......................................................................................................4-15
Basic Procedure ........................................................................................................................4-15
Hardware Setup........................................................................................................................4-15
Installing Linux Real TTY Driver Files ...........................................................................................4-15
Mapping TTY Ports.....................................................................................................................4-16
Removing Mapped TTY Ports.......................................................................................................4-17
Removing Linux Driver Files........................................................................................................4-17
Moxa OnCell UNIX Fixed TTY Driver ....................................................................................................4-17
www.ipc2u.ru
www.moxa.pro

Installing the UNIX Driver...........................................................................................................4-17
Configuring the UNIX Driver ....................................................................................................... 4-18
5. Other Console Considerations ........................................................................................................... 5-1
RS-232 Console Configuration (115200, None, 8, 1, VT100) ....................................................................5-2
Configuration by Telnet and SSH Consoles.............................................................................................5-3
Configuration by Web Browser with HTTPS/SSL......................................................................................5-4
Disabling Telnet and Browser Access.....................................................................................................5-5
A. References ........................................................................................................................................ A-1
Fragment...........................................................................................................................................A-2
RTS threshold ....................................................................................................................................A-2
B. Supporting Information .................................................................................................................... B-1
About This User’s Manual.....................................................................................................................B-2
DoC (Declaration of Conformity)...........................................................................................................B-3
Federal Communication Commission Interference Statement............................................................B-3
R&TTE Compliance Statement.......................................................................................................B-3
Firmware Recovery .............................................................................................................................B-4
www.ipc2u.ru
www.moxa.pro

1
1. Introduction
The AirWorks AWK-1121/1127 enables wireless users to access network resources wirelessly. The
AWK-1121/1127 is rated to operate at temperatures ranging from 0 to 60°C for standard models and -40 to
75°C for wide temperature models, and is rugged enough for any harsh industrial environment.
The following topics are covered in this chapter:

Overview

Package Checklist

Product Features

Functional Design
LED Indicators
Beeper
Reset Button
www.ipc2u.ru
www.moxa.pro

AWK-1121/1127 Introduction
1-2
Overview
The AWK-1121/1127 Client is ideal for applications that are hard to wire, too expensive to wire, or use mobile
equipment that connects to a TCP/IP network. The AWK-1121/1127 can operate at temperatures ranging from
0 to 60°C for standard models and -40 to 75°C for wide temperature models, and is rugged enough for any
harsh industrial environment. Installation is easy, with either DIN-Rail mounting or wall mounting in
distribution boxes. The DIN-Rail/wall mounting capability, wide operating temperature range, and IP30
housing with LED indicators make the AWK-1121/1127 a convenient yet reliable solution for any industrial
wireless application.
Package Checklist
Moxa’s AWK-1121/1127 is shipped with the following items. If any of these items is missing or damaged,
please contact your customer service representative for assistance.
•AWK-1121/1127
•Swivel-type antenna (2dBi, RP-SMA, 2.4&5GHz)
•Quick Installation Guide
•Software CD
•Moxa Product Warranty Card
•Resistive terminator
•Protective cap
NOTE
The above items
come with the standard AWK-1121/1127 model, but the package contents may vary for
customized version
s.
Product Features
•IEEE802.11a/b/g compliant
•Dedicated client
•Advanced wireless security:
64-bit and 128-bit WEP/WPA/WPA2
SSID Hiding/IEEE 802.1X/RADIUS
Packet access control & filtering
•Turbo Roaming enables rapid handover (client based)
•ABC-01 for configuration import/export
•Dedicated antenna selection
•Free firmware update for more advanced functions
•RS-232 console management
•Wide -40 to 75°C operating temperature range (-T model)
•Redundant 24 VDC power inputs or IEEE802.3af Power over Ethernet (PoE model)
•DIN-Rail or wall mounting
•IP30 protected high-strength metal housing
www.ipc2u.ru
www.moxa.pro

AWK-1121/1127 Introduction
1-3
Product Specifications
WLAN Interface
Standards:
IEEE 802.11a/b/g for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3u for 10/100BaseT(X)
IEEE 802.3af for Power
-over-Ethernet (PoE model)
Spread Spectrum and Modulation
(typical):
• DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBPSK @ 11 Mbps
• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps, QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
Operating Channels (centra
l frequency):
US:
2.412 to 2.462 GHz (11 channels)
5.18 to 5.24 GHz (4 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.18 to 5.24 GHz (4 channels)
JP:
2.412 to 2.472 GHz (13 channels, OFDM)
2.412 to 2.484 GHz (14 channels, DSSS)
5.18 to 5.24 GHz (4 ch
annels for W52)
Security:
• SSID broadcast enable/disable
• Firewall for MAC/IP/Protocol/Port
-based filtering
• 64
-bit and 128-bit WEP encryption, WPA /WPA2-Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP and
AES)
Transmission Rates:
802.11b: 1, 2, 5.
5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
Mbps
TX Transmit Power:
802.11b:
Typ. 18±1.5 dBm @ 1 to 11 Mbps
802.11g:
Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 17±1.5 dBm @ 36 Mbps,Typ. 16±1.5 dBm @ 48 Mbps, Typ. 16±1.5
dBm @ 54 Mbps
802.11a:
Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 16±1.5 dBm @ 36 Mbps, Typ. 15±1.5 dBm @ 48 Mbps, Typ. 14±1.5
dBm @ 54 Mbps
RX Sensitivity:
802.11b:
-
97 dBm @ 1 Mbps, -94 dBm @ 2 Mbps, -92 dBm @ 5.5 Mbps, -90 dBm @ 11 Mbps
802.11g:
-
88 dBm @ 6 to 24 Mbps, -85 dBm @ 36 Mbps, -75 dBm @ 48 Mbps, -70 dBm @ 54 Mbps
802.11a:
-
88 dBm @ 6 to 24 Mbps, -85 dBm @ 36 Mbps, -75 dBm @ 48 Mbps, -70 dBm @ 54 Mbps
Protocol Support
General Protocols:
DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, DHCP, LLDP
Interface
Default Antenna:
2 dBi dual-band omni-directional antenna, RP-SMA (male)
Connector for External Antennas:
RP-SMA (female)
LAN Ports:
1, 10/100BaseT(X), auto negotiation speed (RJ45-type)
www.ipc2u.ru
www.moxa.pro

AWK-1121/1127 Introduction
1-4
Serial Port:
1, RS-232/422/485, DB9 male connector (AWK-1127 only)
Console:
RS-232 (RJ45-type)
LED Indicators:
PWR, FAULT, STATE, signal strength, WLAN, LAN
Weight:
400 g (AWK-1121), 410 g (AWK-1127)
Dimensions:
AWK
-1121: 50 x 115 x 70 mm (2.0 x 4.5 x 2.8 in)
AWK
-1127: 50 x 127 x 70 mm (2.0 x 5.0 x 2.8 in)
Installation:
DIN-Rail mounting, wall mounting (with optional kit)
Serial Communication Parameters
(AWK-1127 Only)
Data Bits:
5, 6, 7, 8
Stop Bits:
1, 1.5, 2
Parity:
None, Even, Odd, Space, Mark
Flow Control:
RTS/CTS, XON/XOFF
Baudrate:
50 bps to 921.6 Kbps
Serial Data Log:
256 KB
Serial Signals (AWK-1127 Only)
RS
-232: DSR, RTS, GND, TxD, RxD, DCD, CTS, DTR
RS
-422: Tx+, Tx-, Rx+, Rx-, GND
RS
-485 (2-wire): Data+, Data- and GND
RS
-485 (4-wire): Tx+, Rx+, Tx-, Rx+ and GND
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models:
-40 to 75°C (-40 to 167°F)
Storage Temperature:
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity:
5% to 95% (non-condensing)
Power Requirements
Input
Voltage: 12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-
Ethernet (IEEE 802.3af
compliant
, PoE model only)
Connector:
4-pin removable terminal block
Power Consumption:
•
0.16 to 0.55 A @ 12 to 48 VDC
• 0.
28 A @ 24 VDC
Reverse Polarity
Protection: Present
Regulatory Approvals
Safety:
EN60950-1, UL60950-1
Radio:
EN 300 328, EN 301 893, DSPR (Japan)
EMC:
EN 301 489-1/-17, FCC Part 15, EN 55022/55024
Note: Please check Moxa
’s website for the most up-to-date certification status.
Warranty
Warranty Period:
5 years
Details:
See www.moxa.com/warranty
ATTENTION
•
The AWK-
1121/1127 is NOT a portable mobile device and should be located at least 20 cm away from the
human body.
•
The AWK-1121/1127 is NOT designed for the general public. A well-
trained technician should be enlisted to
ensure safe deployment of AWK-1121/1127 units, and to establish a wireless network.
www.ipc2u.ru
www.moxa.pro

AWK-1121/1127 Introduction
1-5
Functional Design
LED Indicators
The LEDs on the front panel of the AWK-1121/1127 provide a quick and easy means of determining the current
operational status and wireless settings.
The FAULT LED indicates system failures and user-configured events. If the AWK-1121/1127 cannot retrieve
the IP address from a DHCP server or if there is an IP conflict, the FAULT LED will blink at one second intervals.
The SIGNAL LEDs indicate signal strength.
ATTENTION
T
he FAULT, SIGNAL,STATE and WLAN LEDs lighting up simultaneously and blinking at one second
interval
s indicates that the system has failed to boot. This may be due to improper operation or an
uncontrollable
factor, such as an unexpected shutdown during firmware update. Instructions on how to
recover the
firmware can be found in Appendix B in the “Firmware Recovery” section.
Beeper
The beeper emits two short beeps when the system is ready.
www.ipc2u.ru
www.moxa.pro

AWK-1121/1127 Introduction
1-6
Reset Button
The RESET button is located on the back panel of the AWK-1121/1127. You can reboot the AWK-1121/1127 or
reset it to factory default settings by pressing the RESET button with a pointed object such as an unfolded
paper clip.
•System reboot: Hold the RESET button down for under 5 seconds and then release.
•Reset to factory defaults: Hold the RESET button down for more than 5 seconds until the STATE LED
starts blinking green. Release the button to reset the AWK-1121/1127.
www.ipc2u.ru
www.moxa.pro