MOZOTER DBK02 User manual
DBK02
User Manual
Button control
Warm notice
For any single earbud, when it is in standalone mode, you
can’t use it to play the previous song or decrease the volume.
Settings Bluetooth
DBK02
Bluetooth
Now discoverable as”Qi iPhone”.
MYDEVICES
To pair Apple Watch with your iPhone, go to the
Watch app.
First time using
Product overview
Choose the ear cap that suits you.
1x
1x
2x
2x
3x
Accept Decline
Reject
Previous
track Next track
Volume- Volume+
Play / Pause
Voice assistant
5.Turn on the Bluetooth function on your phone and search for
【DBK02】and connect it.
demonstration
Error
2
34
5
6
7
8
ON
OFF
Make sure that the ear
caps face down and put
the earbuds into the ear
in the angle shown as
the picture on the right.
After putting on the
earbuds, gently
rotating the earbuds
to a comfortable and
secure position shown
as picture 3 on the right.
Now the earbuds are
put on correctly!
Do not wear the earbuds
like the way shown as
the picture on the right
Warm notice
△ If indicators of both earbuds keep flashing red and blue, Click
either earbud's power
switch twice. Then the indicator of one earbud
will flash red and
blue alternately, another will go off. (in pairing mode）
△If you want to switch the Bluetooth connection to another device,
please disable the Bluetooth function in the previously connected
device OR delete the pairing name of "DBK02" from the original
device. Then the pairing name of "DBK02"can be searched in new
device and connected successfully.
1.Tear off the insulating film.
4.The indicator of one earbud will go off and another will flash
red and blue light
alternately
.(In pairing mode)
Red &Blue
Flash
Indicator off
Thanks for using our wireless electronic products. For a good user experience, please
read the manual carefully before using the products. Notice: To avoid unnecessary troubles,
please do not disassemble these products by yourself, and please use the standard charger
to charge.
Magnetic Contacts
Earbud Cap
Microphone
Charging Case Indicator Light
MFB Power Switch
2.Put the earbuds into the charging case and close
the lid to charge(the earbuds are in charging state).
3.Open the cover of the charging case and ,they will turn on and
pair automatically and will be prepared for pairing to the phone
(the indicator will turn to Red and Blue alternately).
●The earbuds will automatically turn on after opening the
top lid of the charging case.
OR
●Press and hold the power switch for 5s then leave hold,
the earbuds will turn on.(Not in the charging compartment
and is in the off state)
●
Put the earbuds into the charging case and
close the lid, they will
automatically
shut down.
OR
●
While in the non-working state, press and hold the
power
switch
for 5s, the two earbuds will be turned off at the same
time.
OR
●
Automatically shut down after not connected for more than
5 minutes
Warm notice： If earbuds are not turned on or
there is no
sound come out, please put the earbud back into the charging
case and close the lid again,
make sure that earbuds are in
the charging state before opening the lid and taking out them
to use (red/blue light flash alternately)
SCAN ME
DBK02
User Manual
Button control
Warm notice
For any single earbud, when it is in standalone mode, you
can’t use it to play the previous song or decrease the volume.
Settings Bluetooth
DBK02
Bluetooth
Now discoverable as”Qi iPhone”.
MYDEVICES
To pair Apple Watch with your iPhone, go to the
Watch app.
First time using
Product overview
Choose the ear cap that suits you.
1x
1x
2x
2x
3x
Accept Decline
Reject
Previous
track Next track
Volume- Volume+
Play / Pause
Voice assistant
5.Turn on the Bluetooth function on your phone and search for
【DBK02】and connect it.
demonstration
Error
2
34
5
6
7
8
ON
OFF
Make sure that the ear
caps face down and put
the earbuds into the ear
in the angle shown as
the picture on the right.
After putting on the
earbuds, gently
rotating the earbuds
to a comfortable and
secure position shown
as picture 3 on the right.
Now the earbuds are
put on correctly!
Do not wear the earbuds
like the way shown as
the picture on the right
Warm notice
△ If indicators of both earbuds keep flashing red and blue, Click
either earbud's power
switch twice. Then the indicator of one earbud
will flash red and
blue alternately, another will go off. (in pairing mode）
△If you want to switch the Bluetooth connection to another device,
please disable the Bluetooth function in the previously connected
device OR delete the pairing name of "DBK02" from the original
device. Then the pairing name of "DBK02"can be searched in new
device and connected successfully.
1.Tear off the insulating film.
4.The indicator of one earbud will go off and another will flash
red and blue light
alternately
.(In pairing mode)
Red &Blue
Flash
Indicator off
Thanks for using our wireless electronic products. For a good user experience, please
read the manual carefully before using the products. Notice: To avoid unnecessary troubles,
please do not disassemble these products by yourself, and please use the standard charger
to charge.
Magnetic Contacts
Earbud Cap
Microphone
Charging Case Indicator Light
MFB Power Switch
2.Put the earbuds into the charging case and close
the lid to charge(the earbuds are in charging state).
3.Open the cover of the charging case and ,they will turn on and
pair automatically and will be prepared for pairing to the phone
(the indicator will turn to Red and Blue alternately).
●The earbuds will automatically turn on after opening the
top lid of the charging case.
OR
●Press and hold the power switch for 5s then leave hold,
the earbuds will turn on.(Not in the charging compartment
and is in the off state)
●
Put the earbuds into the charging case and
close the lid, they will
automatically
shut down.
OR
●
While in the non-working state, press and hold the
power
switch
for 5s, the two earbuds will be turned off at the same
time.
OR
●
Automatically shut down after not connected for more than
5 minutes
Warm notice： If earbuds are not turned on or
there is no
sound come out, please put the earbud back into the charging
case and close the lid again,
make sure that earbuds are in
the charging state before opening the lid and taking out them
to use (red/blue light flash alternately)
SCAN ME
DBK02
User Manual
Button control
Warm notice
For any single earbud, when it is in standalone mode, you
can’t use it to play the previous song or decrease the volume.
Settings Bluetooth
DBK02
Bluetooth
Now discoverable as”Qi iPhone”.
MYDEVICES
To pair Apple Watch with your iPhone, go to the
Watch app.
First time using
Product overview
Choose the ear cap that suits you.
1x
1x
2x
2x
3x
Accept Decline
Reject
Previous
track Next track
Volume- Volume+
Play / Pause
Voice assistant
5.Turn on the Bluetooth function on your phone and search for
【DBK02】and connect it.
demonstration
Error
2
34
5
6
7
8
ON
OFF
Make sure that the ear
caps face down and put
the earbuds into the ear
in the angle shown as
the picture on the right.
After putting on the
earbuds, gently
rotating the earbuds
to a comfortable and
secure position shown
as picture 3 on the right.
Now the earbuds are
put on correctly!
Do not wear the earbuds
like the way shown as
the picture on the right
Warm notice
△ If indicators of both earbuds keep flashing red and blue, Click
either earbud's power
switch twice. Then the indicator of one earbud
will flash red and
blue alternately, another will go off. (in pairing mode）
△If you want to switch the Bluetooth connection to another device,
please disable the Bluetooth function in the previously connected
device OR delete the pairing name of "DBK02" from the original
device. Then the pairing name of "DBK02"can be searched in new
device and connected successfully.
1.Tear off the insulating film.
4.The indicator of one earbud will go off and another will flash
red and blue light
alternately
.(In pairing mode)
Red &Blue
Flash
Indicator off
Thanks for using our wireless electronic products. For a good user experience, please
read the manual carefully before using the products. Notice: To avoid unnecessary troubles,
please do not disassemble these products by yourself, and please use the standard charger
to charge.
Magnetic Contacts
Earbud Cap
Microphone
Charging Case Indicator Light
MFB Power Switch
2.Put the earbuds into the charging case and close
the lid to charge(the earbuds are in charging state).
3.Open the cover of the charging case and ,they will turn on and
pair automatically and will be prepared for pairing to the phone
(the indicator will turn to Red and Blue alternately).
●The earbuds will automatically turn on after opening the
top lid of the charging case.
OR
●Press and hold the power switch for 5s then leave hold,
the earbuds will turn on.(Not in the charging compartment
and is in the off state)
●
Put the earbuds into the charging case and
close the lid, they will
automatically
shut down.
OR
●
While in the non-working state, press and hold the
power
switch
for 5s, the two earbuds will be turned off at the same
time.
OR
●
Automatically shut down after not connected for more than
5 minutes
Warm notice： If earbuds are not turned on or
there is no
sound come out, please put the earbud back into the charging
case and close the lid again,
make sure that earbuds are in
the charging state before opening the lid and taking out them
to use (red/blue light flash alternately)
SCAN ME
DBK02
User Manual
Button control
Warm notice
For any single earbud, when it is in standalone mode, you
can’t use it to play the previous song or decrease the volume.
Settings Bluetooth
DBK02
Bluetooth
Now discoverable as”Qi iPhone”.
MYDEVICES
To pair Apple Watch with your iPhone, go to the
Watch app.
First time using
Product overview
Choose the ear cap that suits you.
1x
1x
2x
2x
3x
Accept Decline
Reject
Previous
track Next track
Volume- Volume+
Play / Pause
Voice assistant
5.Turn on the Bluetooth function on your phone and search for
【DBK02】and connect it.
demonstration
Error
2
34
5
6
7
8
ON
OFF
Make sure that the ear
caps face down and put
the earbuds into the ear
in the angle shown as
the picture on the right.
After putting on the
earbuds, gently
rotating the earbuds
to a comfortable and
secure position shown
as picture 3 on the right.
Now the earbuds are
put on correctly!
Do not wear the earbuds
like the way shown as
the picture on the right
Warm notice
△ If indicators of both earbuds keep flashing red and blue, Click
either earbud's power
switch twice. Then the indicator of one earbud
will flash red and
blue alternately, another will go off. (in pairing mode）
△If you want to switch the Bluetooth connection to another device,
please disable the Bluetooth function in the previously connected
device OR delete the pairing name of "DBK02" from the original
device. Then the pairing name of "DBK02"can be searched in new
device and connected successfully.
1.Tear off the insulating film.
4.The indicator of one earbud will go off and another will flash
red and blue light
alternately
.(In pairing mode)
Red &Blue
Flash
Indicator off
Thanks for using our wireless electronic products. For a good user experience, please
read the manual carefully before using the products. Notice: To avoid unnecessary troubles,
please do not disassemble these products by yourself, and please use the standard charger
to charge.
Magnetic Contacts
Earbud Cap
Microphone
Charging Case Indicator Light
MFB Power Switch
2.Put the earbuds into the charging case and close
the lid to charge(the earbuds are in charging state).
3.Open the cover of the charging case and ,they will turn on and
pair automatically and will be prepared for pairing to the phone
(the indicator will turn to Red and Blue alternately).
●The earbuds will automatically turn on after opening the
top lid of the charging case.
OR
●Press and hold the power switch for 5s then leave hold,
the earbuds will turn on.(Not in the charging compartment
and is in the off state)
●
Put the earbuds into the charging case and
close the lid, they will
automatically
shut down.
OR
●
While in the non-working state, press and hold the
power
switch
for 5s, the two earbuds will be turned off at the same
time.
OR
●
Automatically shut down after not connected for more than
5 minutes
Warm notice： If earbuds are not turned on or
there is no
sound come out, please put the earbud back into the charging
case and close the lid again,
make sure that earbuds are in
the charging state before opening the lid and taking out them
to use (red/blue light flash alternately)
SCAN ME
DBK02
User Manual
Button control
Warm notice
For any single earbud, when it is in standalone mode, you
can’t use it to play the previous song or decrease the volume.
Settings Bluetooth
DBK02
Bluetooth
Now discoverable as”Qi iPhone”.
MYDEVICES
To pair Apple Watch with your iPhone, go to the
Watch app.
First time using
Product overview
Choose the ear cap that suits you.
1x
1x
2x
2x
3x
Accept Decline
Reject
Previous
track Next track
Volume- Volume+
Play / Pause
Voice assistant
5.Turn on the Bluetooth function on your phone and search for
【DBK02】and connect it.
demonstration
Error
2
34
5
6
7
8
ON
OFF
Make sure that the ear
caps face down and put
the earbuds into the ear
in the angle shown as
the picture on the right.
After putting on the
earbuds, gently
rotating the earbuds
to a comfortable and
secure position shown
as picture 3 on the right.
Now the earbuds are
put on correctly!
Do not wear the earbuds
like the way shown as
the picture on the right
Warm notice
△ If indicators of both earbuds keep flashing red and blue, Click
either earbud's power
switch twice. Then the indicator of one earbud
will flash red and
blue alternately, another will go off. (in pairing mode）
△If you want to switch the Bluetooth connection to another device,
please disable the Bluetooth function in the previously connected
device OR delete the pairing name of "DBK02" from the original
device. Then the pairing name of "DBK02"can be searched in new
device and connected successfully.
1.Tear off the insulating film.
4.The indicator of one earbud will go off and another will flash
red and blue light
alternately
.(In pairing mode)
Red &Blue
Flash
Indicator off
Thanks for using our wireless electronic products. For a good user experience, please
read the manual carefully before using the products. Notice: To avoid unnecessary troubles,
please do not disassemble these products by yourself, and please use the standard charger
to charge.
Magnetic Contacts
Earbud Cap
Microphone
Charging Case Indicator Light
MFB Power Switch
2.Put the earbuds into the charging case and close
the lid to charge(the earbuds are in charging state).
3.Open the cover of the charging case and ,they will turn on and
pair automatically and will be prepared for pairing to the phone
(the indicator will turn to Red and Blue alternately).
●The earbuds will automatically turn on after opening the
top lid of the charging case.
OR
●Press and hold the power switch for 5s then leave hold,
the earbuds will turn on.(Not in the charging compartment
and is in the off state)
●
Put the earbuds into the charging case and
close the lid, they will
automatically
shut down.
OR
●
While in the non-working state, press and hold the
power
switch
for 5s, the two earbuds will be turned off at the same
time.
OR
●
Automatically shut down after not connected for more than
5 minutes
Warm notice： If earbuds are not turned on or
there is no
sound come out, please put the earbud back into the charging
case and close the lid again,
make sure that earbuds are in
the charging state before opening the lid and taking out them
to use (red/blue light flash alternately)
SCAN ME
DBK02
User Manual
Button control
Warm notice
For any single earbud, when it is in standalone mode, you
can’t use it to play the previous song or decrease the volume.
Settings Bluetooth
DBK02
Bluetooth
Now discoverable as”Qi iPhone”.
MYDEVICES
To pair Apple Watch with your iPhone, go to the
Watch app.
First time using
Product overview
Choose the ear cap that suits you.
1x
1x
2x
2x
3x
Accept Decline
Reject
Previous
track Next track
Volume- Volume+
Play / Pause
Voice assistant
5.Turn on the Bluetooth function on your phone and search for
【DBK02】and connect it.
demonstration
Error
2
34
5
6
7
8
ON
OFF
Make sure that the ear
caps face down and put
the earbuds into the ear
in the angle shown as
the picture on the right.
After putting on the
earbuds, gently
rotating the earbuds
to a comfortable and
secure position shown
as picture 3 on the right.
Now the earbuds are
put on correctly!
Do not wear the earbuds
like the way shown as
the picture on the right
Warm notice
△ If indicators of both earbuds keep flashing red and blue, Click
either earbud's power
switch twice. Then the indicator of one earbud
will flash red and
blue alternately, another will go off. (in pairing mode）
△If you want to switch the Bluetooth connection to another device,
please disable the Bluetooth function in the previously connected
device OR delete the pairing name of "DBK02" from the original
device. Then the pairing name of "DBK02"can be searched in new
device and connected successfully.
1.Tear off the insulating film.
4.The indicator of one earbud will go off and another will flash
red and blue light
alternately
.(In pairing mode)
Red &Blue
Flash
Indicator off
Thanks for using our wireless electronic products. For a good user experience, please
read the manual carefully before using the products. Notice: To avoid unnecessary troubles,
please do not disassemble these products by yourself, and please use the standard charger
to charge.
Magnetic Contacts
Earbud Cap
Microphone
Charging Case Indicator Light
MFB Power Switch
2.Put the earbuds into the charging case and close
the lid to charge(the earbuds are in charging state).
3.Open the cover of the charging case and ,they will turn on and
pair automatically and will be prepared for pairing to the phone
(the indicator will turn to Red and Blue alternately).
●The earbuds will automatically turn on after opening the
top lid of the charging case.
OR
●Press and hold the power switch for 5s then leave hold,
the earbuds will turn on.(Not in the charging compartment
and is in the off state)
●
Put the earbuds into the charging case and
close the lid, they will
automatically
shut down.
OR
●
While in the non-working state, press and hold the
power
switch
for 5s, the two earbuds will be turned off at the same
time.
OR
●
Automatically shut down after not connected for more than
5 minutes
Warm notice： If earbuds are not turned on or
there is no
sound come out, please put the earbud back into the charging
case and close the lid again,
make sure that earbuds are in
the charging state before opening the lid and taking out them
to use (red/blue light flash alternately)
SCAN ME
DBK02
User Manual
Button control
Warm notice
For any single earbud, when it is in standalone mode, you
can’t use it to play the previous song or decrease the volume.
Settings Bluetooth
DBK02
Bluetooth
Now discoverable as”Qi iPhone”.
MYDEVICES
To pair Apple Watch with your iPhone, go to the
Watch app.
First time using
Product overview
Choose the ear cap that suits you.
1x
1x
2x
2x
3x
Accept Decline
Reject
Previous
track Next track
Volume- Volume+
Play / Pause
Voice assistant
5.Turn on the Bluetooth function on your phone and search for
【DBK02】and connect it.
demonstration
Error
2
34
5
6
7
8
ON
OFF
Make sure that the ear
caps face down and put
the earbuds into the ear
in the angle shown as
the picture on the right.
After putting on the
earbuds, gently
rotating the earbuds
to a comfortable and
secure position shown
as picture 3 on the right.
Now the earbuds are
put on correctly!
Do not wear the earbuds
like the way shown as
the picture on the right
Warm notice
△ If indicators of both earbuds keep flashing red and blue, Click
either earbud's power
switch twice. Then the indicator of one earbud
will flash red and
blue alternately, another will go off. (in pairing mode）
△If you want to switch the Bluetooth connection to another device,
please disable the Bluetooth function in the previously connected
device OR delete the pairing name of "DBK02" from the original
device. Then the pairing name of "DBK02"can be searched in new
device and connected successfully.
1.Tear off the insulating film.
4.The indicator of one earbud will go off and another will flash
red and blue light
alternately
.(In pairing mode)
Red &Blue
Flash
Indicator off
Thanks for using our wireless electronic products. For a good user experience, please
read the manual carefully before using the products. Notice: To avoid unnecessary troubles,
please do not disassemble these products by yourself, and please use the standard charger
to charge.
Magnetic Contacts
Earbud Cap
Microphone
Charging Case Indicator Light
MFB Power Switch
2.Put the earbuds into the charging case and close
the lid to charge(the earbuds are in charging state).
3.Open the cover of the charging case and ,they will turn on and
pair automatically and will be prepared for pairing to the phone
(the indicator will turn to Red and Blue alternately).
●The earbuds will automatically turn on after opening the
top lid of the charging case.
OR
●Press and hold the power switch for 5s then leave hold,
the earbuds will turn on.(Not in the charging compartment
and is in the off state)
●
Put the earbuds into the charging case and
close the lid, they will
automatically
shut down.
OR
●
While in the non-working state, press and hold the
power
switch
for 5s, the two earbuds will be turned off at the same
time.
OR
●
Automatically shut down after not connected for more than
5 minutes
Warm notice： If earbuds are not turned on or
there is no
sound come out, please put the earbud back into the charging
case and close the lid again,
make sure that earbuds are in
the charging state before opening the lid and taking out them
to use (red/blue light flash alternately)
SCAN ME
DBK02
User Manual
Button control
Warm notice
For any single earbud, when it is in standalone mode, you
can’t use it to play the previous song or decrease the volume.
Settings Bluetooth
DBK02
Bluetooth
Now discoverable as”Qi iPhone”.
MYDEVICES
To pair Apple Watch with your iPhone, go to the
Watch app.
First time using
Product overview
Choose the ear cap that suits you.
1x
1x
2x
2x
3x
Accept Decline
Reject
Previous
track Next track
Volume- Volume+
Play / Pause
Voice assistant
5.Turn on the Bluetooth function on your phone and search for
【DBK02】and connect it.
demonstration
Error
2
34
5
6
7
8
ON
OFF
Make sure that the ear
caps face down and put
the earbuds into the ear
in the angle shown as
the picture on the right.
After putting on the
earbuds, gently
rotating the earbuds
to a comfortable and
secure position shown
as picture 3 on the right.
Now the earbuds are
put on correctly!
Do not wear the earbuds
like the way shown as
the picture on the right
Warm notice
△ If indicators of both earbuds keep flashing red and blue, Click
either earbud's power
switch twice. Then the indicator of one earbud
will flash red and
blue alternately, another will go off. (in pairing mode）
△If you want to switch the Bluetooth connection to another device,
please disable the Bluetooth function in the previously connected
device OR delete the pairing name of "DBK02" from the original
device. Then the pairing name of "DBK02"can be searched in new
device and connected successfully.
1.Tear off the insulating film.
4.The indicator of one earbud will go off and another will flash
red and blue light
alternately
.(In pairing mode)
Red &Blue
Flash
Indicator off
Thanks for using our wireless electronic products. For a good user experience, please
read the manual carefully before using the products. Notice: To avoid unnecessary troubles,
please do not disassemble these products by yourself, and please use the standard charger
to charge.
Magnetic Contacts
Earbud Cap
Microphone
Charging Case Indicator Light
MFB Power Switch
2.Put the earbuds into the charging case and close
the lid to charge(the earbuds are in charging state).
3.Open the cover of the charging case and ,they will turn on and
pair automatically and will be prepared for pairing to the phone
(the indicator will turn to Red and Blue alternately).
●The earbuds will automatically turn on after opening the
top lid of the charging case.
OR
●Press and hold the power switch for 5s then leave hold,
the earbuds will turn on.(Not in the charging compartment
and is in the off state)
●
Put the earbuds into the charging case and
close the lid, they will
automatically
shut down.
OR
●
While in the non-working state, press and hold the
power
switch
for 5s, the two earbuds will be turned off at the same
time.
OR
●
Automatically shut down after not connected for more than
5 minutes
Warm notice： If earbuds are not turned on or
there is no
sound come out, please put the earbud back into the charging
case and close the lid again,
make sure that earbuds are in
the charging state before opening the lid and taking out them
to use (red/blue light flash alternately)
SCAN ME
Status White light
Left earbud in charging state
"L" light on the charging case on
Left earbud in full battery state
"L" light on the charging case off
Right earbud in charging state
"R" light on the charging case on
Right earbud in full battery state
"R" light on the charging case off
Charging case in full battery state Displays 100%
Charging for earbuds Displays the percentage of remaining
power of charging case
Charging case in low battery state Displays 5%
Settings Bluetooth
DBK02
Bluetooth
Now discoverable as”Qi iPhone”.
MYDEVICES
To pair Apple Watch with your iPhone, go to the
Watch app.
Earbuds indicator
Status Light
Turn on Blue light flashes for 1 second Then the red and
blue light flash
alternately
Turn off Red light goes out after flashing for one second
Search earbuds Red and blue light flash alternately
The earbuds
connect successfully
After successful pairing, the light of the
main ear flashes alternately in red and blue
Music play No light
Connect with mobile
phone successfully
Blue light of both earbuds flash
once circularly
every 6s
Low battery Red light of earbud flashes once every 6s
Charging Red light on
Full battery
Red light off
Specifications
Version V5.2+EDR
Support HFP,HSP,A2DP,AVRCP
Transmission distance 10m
Frequency range 2.402GHz~2.480GHz
Speaker Φ 8.2mm*2
Impedance 16 Ω
Standby time 60 hours
Talk time 4 hours
Playing time 4 hours
Earbud battery capacity 40mAh
Fully charged time 1 hour
Charging case battery capacity 500mAh
Charging time of charging case About 1.5 hours
Weight (single earbud) 4.0 g
Charging case indicator
Restore factory setting
1.When the earbud is on with mobile phone unconnect-
ed, click the left and right power switch simultaneously
four times quickly. The red and blue lights will be on for 2
seconds and then it will clear its memory and the earbuds
will shut down.
2.Please delete all paired records on thephone and
search again for "DBK02"on the bluetooth of mobile phone
and reconnect.
There is a built-in lithium battery in this
product. To avoid explosion, do NOT
expose the product to strong sunlight,
fire or throw it into fire.
Battery Warning ！
Attentions 1.Do not use corrosive liquid to clean this product.
3.Do not use this product under extreme circumstances
for temperature
below -10 degree Celsius or above 60 degree Celsius .
4.To avoid explosion, please do not throw this product
into fire.
5.To avoid scratches, please do not touch the earbuds
with sharp objects.
6.Do not insert objects into the earbuds, otherwise it would cause damage
to the internal components.
7.Do not disassemble the earbud.
8. Please keep regular charge to earbuds, don’t leave
them become empty
battery status to keep their lifetime.
9. Please do not charge products with power adapter over 2A
current. Excessive current may cause the damage to battery.
2.If it comes into contact with chemicals, please rub it with a damp
cloth wet with clean water.
4x
IOS and part of the Android users can triple click the left or
right power switch to turn on the voice assistant.
Siri and other Voice Assistant
3x
Bluetooth
Forget This Device
DBK01
Device Type
Forget Device
cancel
The voice assistant will be automatically activated depends in
different OS in mobile system.
Charging
Full battery
Charging
for earbuds
L&R Earbud
910 11 12
13
14
15
16
Please make sure that the products are dry. If there is
water droplet on the surface, please wipe it with a dry
cloth before putting them back into the charging case to
avoid demaging the device.
Charging case：Please use a charger with an output voltage of
DC5V/1A to charge the charging case. You can also use a computer
USB or other USB interface charger to charge (Must choose a charger
certified by a regular manufacturer）.
Charging indicator of Right earbud
Charging indicator of Left earbud
Remaining power of charging case
Put the earbud in the charging case, and the lid must be
closed to charge it, and they will automatically turn off and
disconnect when the charging case lid is closed.
Steps of charging for earbuds:
Notice: If the charging case is out of power, it may cause the earbuds
to fail to shut down and remain connected to the phone even when
they are placed in the charging case. So please remerber to charge
the charging case in time.
Status White light
Left earbud in charging state
"L" light on the charging case on
Left earbud in full battery state
"L" light on the charging case off
Right earbud in charging state
"R" light on the charging case on
Right earbud in full battery state
"R" light on the charging case off
Charging case in full battery state Displays 100%
Charging for earbuds Displays the percentage of remaining
power of charging case
Charging case in low battery state Displays 5%
Settings Bluetooth
DBK02
Bluetooth
Now discoverable as”Qi iPhone”.
MYDEVICES
To pair Apple Watch with your iPhone, go to the
Watch app.
Earbuds indicator
Status Light
Turn on Blue light flashes for 1 second Then the red and
blue light flash
alternately
Turn off Red light goes out after flashing for one second
Search earbuds Red and blue light flash alternately
The earbuds
connect successfully
After successful pairing, the light of the
main ear flashes alternately in red and blue
Music play No light
Connect with mobile
phone successfully
Blue light of both earbuds flash
once circularly
every 6s
Low battery Red light of earbud flashes once every 6s
Charging Red light on
Full battery
Red light off
Specifications
Version V5.2+EDR
Support HFP,HSP,A2DP,AVRCP
Transmission distance 10m
Frequency range 2.402GHz~2.480GHz
Speaker Φ 8.2mm*2
Impedance 16 Ω
Standby time 60 hours
Talk time 4 hours
Playing time 4 hours
Earbud battery capacity 40mAh
Fully charged time 1 hour
Charging case battery capacity 500mAh
Charging time of charging case About 1.5 hours
Weight (single earbud) 4.0 g
Charging case indicator
Restore factory setting
1.When the earbud is on with mobile phone unconnect-
ed, click the left and right power switch simultaneously
four times quickly. The red and blue lights will be on for 2
seconds and then it will clear its memory and the earbuds
will shut down.
2.Please delete all paired records on thephone and
search again for "DBK02"on the bluetooth of mobile phone
and reconnect.
There is a built-in lithium battery in this
product. To avoid explosion, do NOT
expose the product to strong sunlight,
fire or throw it into fire.
Battery Warning ！
Attentions 1.Do not use corrosive liquid to clean this product.
3.Do not use this product under extreme circumstances
for temperature
below -10 degree Celsius or above 60 degree Celsius .
4.To avoid explosion, please do not throw this product
into fire.
5.To avoid scratches, please do not touch the earbuds
with sharp objects.
6.Do not insert objects into the earbuds, otherwise it would cause damage
to the internal components.
7.Do not disassemble the earbud.
8. Please keep regular charge to earbuds, don’t leave
them become empty
battery status to keep their lifetime.
9. Please do not charge products with power adapter over 2A
current. Excessive current may cause the damage to battery.
2.If it comes into contact with chemicals, please rub it with a damp
cloth wet with clean water.
4x
IOS and part of the Android users can triple click the left or
right power switch to turn on the voice assistant.
Siri and other Voice Assistant
3x
Bluetooth
Forget This Device
DBK01
Device Type
Forget Device
cancel
The voice assistant will be automatically activated depends in
different OS in mobile system.
Charging
Full battery
Charging
for earbuds
L&R Earbud
910 11 12
13
14
15
16
Please make sure that the products are dry. If there is
water droplet on the surface, please wipe it with a dry
cloth before putting them back into the charging case to
avoid demaging the device.
Charging case：Please use a charger with an output voltage of
DC5V/1A to charge the charging case. You can also use a computer
USB or other USB interface charger to charge (Must choose a charger
certified by a regular manufacturer）.
Charging indicator of Right earbud
Charging indicator of Left earbud
Remaining power of charging case
Put the earbud in the charging case, and the lid must be
closed to charge it, and they will automatically turn off and
disconnect when the charging case lid is closed.
Steps of charging for earbuds:
Notice: If the charging case is out of power, it may cause the earbuds
to fail to shut down and remain connected to the phone even when
they are placed in the charging case. So please remerber to charge
the charging case in time.
Status White light
Left earbud in charging state
"L" light on the charging case on
Left earbud in full battery state
"L" light on the charging case off
Right earbud in charging state
"R" light on the charging case on
Right earbud in full battery state
"R" light on the charging case off
Charging case in full battery state Displays 100%
Charging for earbuds Displays the percentage of remaining
power of charging case
Charging case in low battery state Displays 5%
Settings Bluetooth
DBK02
Bluetooth
Now discoverable as”Qi iPhone”.
MYDEVICES
To pair Apple Watch with your iPhone, go to the
Watch app.
Earbuds indicator
Status Light
Turn on Blue light flashes for 1 second Then the red and
blue light flash
alternately
Turn off Red light goes out after flashing for one second
Search earbuds Red and blue light flash alternately
The earbuds
connect successfully
After successful pairing, the light of the
main ear flashes alternately in red and blue
Music play No light
Connect with mobile
phone successfully
Blue light of both earbuds flash
once circularly
every 6s
Low battery Red light of earbud flashes once every 6s
Charging Red light on
Full battery
Red light off
Specifications
Version V5.2+EDR
Support HFP,HSP,A2DP,AVRCP
Transmission distance 10m
Frequency range 2.402GHz~2.480GHz
Speaker Φ 8.2mm*2
Impedance 16 Ω
Standby time 60 hours
Talk time 4 hours
Playing time 4 hours
Earbud battery capacity 40mAh
Fully charged time 1 hour
Charging case battery capacity 500mAh
Charging time of charging case About 1.5 hours
Weight (single earbud) 4.0 g
Charging case indicator
Restore factory setting
1.When the earbud is on with mobile phone unconnect-
ed, click the left and right power switch simultaneously
four times quickly. The red and blue lights will be on for 2
seconds and then it will clear its memory and the earbuds
will shut down.
2.Please delete all paired records on thephone and
search again for "DBK02"on the bluetooth of mobile phone
and reconnect.
There is a built-in lithium battery in this
product. To avoid explosion, do NOT
expose the product to strong sunlight,
fire or throw it into fire.
Battery Warning ！
Attentions 1.Do not use corrosive liquid to clean this product.
3.Do not use this product under extreme circumstances
for temperature
below -10 degree Celsius or above 60 degree Celsius .
4.To avoid explosion, please do not throw this product
into fire.
5.To avoid scratches, please do not touch the earbuds
with sharp objects.
6.Do not insert objects into the earbuds, otherwise it would cause damage
to the internal components.
7.Do not disassemble the earbud.
8. Please keep regular charge to earbuds, don’t leave
them become empty
battery status to keep their lifetime.
9. Please do not charge products with power adapter over 2A
current. Excessive current may cause the damage to battery.
2.If it comes into contact with chemicals, please rub it with a damp
cloth wet with clean water.
4x
IOS and part of the Android users can triple click the left or
right power switch to turn on the voice assistant.
Siri and other Voice Assistant
3x
Bluetooth
Forget This Device
DBK01
Device Type
Forget Device
cancel
The voice assistant will be automatically activated depends in
different OS in mobile system.
Charging
Full battery
Charging
for earbuds
L&R Earbud
910 11 12
13
14
15
16
Please make sure that the products are dry. If there is
water droplet on the surface, please wipe it with a dry
cloth before putting them back into the charging case to
avoid demaging the device.
Charging case：Please use a charger with an output voltage of
DC5V/1A to charge the charging case. You can also use a computer
USB or other USB interface charger to charge (Must choose a charger
certified by a regular manufacturer）.
Charging indicator of Right earbud
Charging indicator of Left earbud
Remaining power of charging case
Put the earbud in the charging case, and the lid must be
closed to charge it, and they will automatically turn off and
disconnect when the charging case lid is closed.
Steps of charging for earbuds:
Notice: If the charging case is out of power, it may cause the earbuds
to fail to shut down and remain connected to the phone even when
they are placed in the charging case. So please remerber to charge
the charging case in time.
Status White light
Left earbud in charging state
"L" light on the charging case on
Left earbud in full battery state
"L" light on the charging case off
Right earbud in charging state
"R" light on the charging case on
Right earbud in full battery state
"R" light on the charging case off
Charging case in full battery state Displays 100%
Charging for earbuds Displays the percentage of remaining
power of charging case
Charging case in low battery state Displays 5%
Settings Bluetooth
DBK02
Bluetooth
Now discoverable as”Qi iPhone”.
MYDEVICES
To pair Apple Watch with your iPhone, go to the
Watch app.
Earbuds indicator
Status Light
Turn on Blue light flashes for 1 second Then the red and
blue light flash
alternately
Turn off Red light goes out after flashing for one second
Search earbuds Red and blue light flash alternately
The earbuds
connect successfully
After successful pairing, the light of the
main ear flashes alternately in red and blue
Music play No light
Connect with mobile
phone successfully
Blue light of both earbuds flash
once circularly
every 6s
Low battery Red light of earbud flashes once every 6s
Charging Red light on
Full battery
Red light off
Specifications
Version V5.2+EDR
Support HFP,HSP,A2DP,AVRCP
Transmission distance 10m
Frequency range 2.402GHz~2.480GHz
Speaker Φ 8.2mm*2
Impedance 16 Ω
Standby time 60 hours
Talk time 4 hours
Playing time 4 hours
Earbud battery capacity 40mAh
Fully charged time 1 hour
Charging case battery capacity 500mAh
Charging time of charging case About 1.5 hours
Weight (single earbud) 4.0 g
Charging case indicator
Restore factory setting
1.When the earbud is on with mobile phone unconnect-
ed, click the left and right power switch simultaneously
four times quickly. The red and blue lights will be on for 2
seconds and then it will clear its memory and the earbuds
will shut down.
2.Please delete all paired records on thephone and
search again for "DBK02"on the bluetooth of mobile phone
and reconnect.
There is a built-in lithium battery in this
product. To avoid explosion, do NOT
expose the product to strong sunlight,
fire or throw it into fire.
Battery Warning ！
Attentions 1.Do not use corrosive liquid to clean this product.
3.Do not use this product under extreme circumstances
for temperature
below -10 degree Celsius or above 60 degree Celsius .
4.To avoid explosion, please do not throw this product
into fire.
5.To avoid scratches, please do not touch the earbuds
with sharp objects.
6.Do not insert objects into the earbuds, otherwise it would cause damage
to the internal components.
7.Do not disassemble the earbud.
8. Please keep regular charge to earbuds, don’t leave
them become empty
battery status to keep their lifetime.
9. Please do not charge products with power adapter over 2A
current. Excessive current may cause the damage to battery.
2.If it comes into contact with chemicals, please rub it with a damp
cloth wet with clean water.
4x
IOS and part of the Android users can triple click the left or
right power switch to turn on the voice assistant.
Siri and other Voice Assistant
3x
Bluetooth
Forget This Device
DBK01
Device Type
Forget Device
cancel
The voice assistant will be automatically activated depends in
different OS in mobile system.
Charging
Full battery
Charging
for earbuds
L&R Earbud
910 11 12
13
14
15
16
Please make sure that the products are dry. If there is
water droplet on the surface, please wipe it with a dry
cloth before putting them back into the charging case to
avoid demaging the device.
Charging case：Please use a charger with an output voltage of
DC5V/1A to charge the charging case. You can also use a computer
USB or other USB interface charger to charge (Must choose a charger
certified by a regular manufacturer）.
Charging indicator of Right earbud
Charging indicator of Left earbud
Remaining power of charging case
Put the earbud in the charging case, and the lid must be
closed to charge it, and they will automatically turn off and
disconnect when the charging case lid is closed.
Steps of charging for earbuds:
Notice: If the charging case is out of power, it may cause the earbuds
to fail to shut down and remain connected to the phone even when
they are placed in the charging case. So please remerber to charge
the charging case in time.
Status White light
Left earbud in charging state
"L" light on the charging case on
Left earbud in full battery state
"L" light on the charging case off
Right earbud in charging state
"R" light on the charging case on
Right earbud in full battery state
"R" light on the charging case off
Charging case in full battery state Displays 100%
Charging for earbuds Displays the percentage of remaining
power of charging case
Charging case in low battery state Displays 5%
Settings Bluetooth
DBK02
Bluetooth
Now discoverable as”Qi iPhone”.
MYDEVICES
To pair Apple Watch with your iPhone, go to the
Watch app.
Earbuds indicator
Status Light
Turn on Blue light flashes for 1 second Then the red and
blue light flash
alternately
Turn off Red light goes out after flashing for one second
Search earbuds Red and blue light flash alternately
The earbuds
connect successfully
After successful pairing, the light of the
main ear flashes alternately in red and blue
Music play No light
Connect with mobile
phone successfully
Blue light of both earbuds flash
once circularly
every 6s
Low battery Red light of earbud flashes once every 6s
Charging Red light on
Full battery
Red light off
Specifications
Version V5.2+EDR
Support HFP,HSP,A2DP,AVRCP
Transmission distance 10m
Frequency range 2.402GHz~2.480GHz
Speaker Φ 8.2mm*2
Impedance 16 Ω
Standby time 60 hours
Talk time 4 hours
Playing time 4 hours
Earbud battery capacity 40mAh
Fully charged time 1 hour
Charging case battery capacity 500mAh
Charging time of charging case About 1.5 hours
Weight (single earbud) 4.0 g
Charging case indicator
Restore factory setting
1.When the earbud is on with mobile phone unconnect-
ed, click the left and right power switch simultaneously
four times quickly. The red and blue lights will be on for 2
seconds and then it will clear its memory and the earbuds
will shut down.
2.Please delete all paired records on thephone and
search again for "DBK02"on the bluetooth of mobile phone
and reconnect.
There is a built-in lithium battery in this
product. To avoid explosion, do NOT
expose the product to strong sunlight,
fire or throw it into fire.
Battery Warning ！
Attentions 1.Do not use corrosive liquid to clean this product.
3.Do not use this product under extreme circumstances
for temperature
below -10 degree Celsius or above 60 degree Celsius .
4.To avoid explosion, please do not throw this product
into fire.
5.To avoid scratches, please do not touch the earbuds
with sharp objects.
6.Do not insert objects into the earbuds, otherwise it would cause damage
to the internal components.
7.Do not disassemble the earbud.
8. Please keep regular charge to earbuds, don’t leave
them become empty
battery status to keep their lifetime.
9. Please do not charge products with power adapter over 2A
current. Excessive current may cause the damage to battery.
2.If it comes into contact with chemicals, please rub it with a damp
cloth wet with clean water.
4x
IOS and part of the Android users can triple click the left or
right power switch to turn on the voice assistant.
Siri and other Voice Assistant
3x
Bluetooth
Forget This Device
DBK01
Device Type
Forget Device
cancel
The voice assistant will be automatically activated depends in
different OS in mobile system.
Charging
Full battery
Charging
for earbuds
L&R Earbud
910 11 12
13
14
15
16
Please make sure that the products are dry. If there is
water droplet on the surface, please wipe it with a dry
cloth before putting them back into the charging case to
avoid demaging the device.
Charging case：Please use a charger with an output voltage of
DC5V/1A to charge the charging case. You can also use a computer
USB or other USB interface charger to charge (Must choose a charger
certified by a regular manufacturer）.
Charging indicator of Right earbud
Charging indicator of Left earbud
Remaining power of charging case
Put the earbud in the charging case, and the lid must be
closed to charge it, and they will automatically turn off and
disconnect when the charging case lid is closed.
Steps of charging for earbuds:
Notice: If the charging case is out of power, it may cause the earbuds
to fail to shut down and remain connected to the phone even when
they are placed in the charging case. So please remerber to charge
the charging case in time.
Status White light
Left earbud in charging state
"L" light on the charging case on
Left earbud in full battery state
"L" light on the charging case off
Right earbud in charging state
"R" light on the charging case on
Right earbud in full battery state
"R" light on the charging case off
Charging case in full battery state Displays 100%
Charging for earbuds Displays the percentage of remaining
power of charging case
Charging case in low battery state Displays 5%
Settings Bluetooth
DBK02
Bluetooth
Now discoverable as”Qi iPhone”.
MYDEVICES
To pair Apple Watch with your iPhone, go to the
Watch app.
Earbuds indicator
Status Light
Turn on Blue light flashes for 1 second Then the red and
blue light flash
alternately
Turn off Red light goes out after flashing for one second
Search earbuds Red and blue light flash alternately
The earbuds
connect successfully
After successful pairing, the light of the
main ear flashes alternately in red and blue
Music play No light
Connect with mobile
phone successfully
Blue light of both earbuds flash
once circularly
every 6s
Low battery Red light of earbud flashes once every 6s
Charging Red light on
Full battery
Red light off
Specifications
Version V5.2+EDR
Support HFP,HSP,A2DP,AVRCP
Transmission distance 10m
Frequency range 2.402GHz~2.480GHz
Speaker Φ 8.2mm*2
Impedance 16 Ω
Standby time 60 hours
Talk time 4 hours
Playing time 4 hours
Earbud battery capacity 40mAh
Fully charged time 1 hour
Charging case battery capacity 500mAh
Charging time of charging case About 1.5 hours
Weight (single earbud) 4.0 g
Charging case indicator
Restore factory setting
1.When the earbud is on with mobile phone unconnect-
ed, click the left and right power switch simultaneously
four times quickly. The red and blue lights will be on for 2
seconds and then it will clear its memory and the earbuds
will shut down.
2.Please delete all paired records on thephone and
search again for "DBK02"on the bluetooth of mobile phone
and reconnect.
There is a built-in lithium battery in this
product. To avoid explosion, do NOT
expose the product to strong sunlight,
fire or throw it into fire.
Battery Warning ！
Attentions 1.Do not use corrosive liquid to clean this product.
3.Do not use this product under extreme circumstances
for temperature
below -10 degree Celsius or above 60 degree Celsius .
4.To avoid explosion, please do not throw this product
into fire.
5.To avoid scratches, please do not touch the earbuds
with sharp objects.
6.Do not insert objects into the earbuds, otherwise it would cause damage
to the internal components.
7.Do not disassemble the earbud.
8. Please keep regular charge to earbuds, don’t leave
them become empty
battery status to keep their lifetime.
9. Please do not charge products with power adapter over 2A
current. Excessive current may cause the damage to battery.
2.If it comes into contact with chemicals, please rub it with a damp
cloth wet with clean water.
4x
IOS and part of the Android users can triple click the left or
right power switch to turn on the voice assistant.
Siri and other Voice Assistant
3x
Bluetooth
Forget This Device
DBK01
Device Type
Forget Device
cancel
The voice assistant will be automatically activated depends in
different OS in mobile system.
Charging
Full battery
Charging
for earbuds
L&R Earbud
910 11 12
13
14
15
16
Please make sure that the products are dry. If there is
water droplet on the surface, please wipe it with a dry
cloth before putting them back into the charging case to
avoid demaging the device.
Charging case：Please use a charger with an output voltage of
DC5V/1A to charge the charging case. You can also use a computer
USB or other USB interface charger to charge (Must choose a charger
certified by a regular manufacturer）.
Charging indicator of Right earbud
Charging indicator of Left earbud
Remaining power of charging case
Put the earbud in the charging case, and the lid must be
closed to charge it, and they will automatically turn off and
disconnect when the charging case lid is closed.
Steps of charging for earbuds:
Notice: If the charging case is out of power, it may cause the earbuds
to fail to shut down and remain connected to the phone even when
they are placed in the charging case. So please remerber to charge
the charging case in time.
Status White light
Left earbud in charging state
"L" light on the charging case on
Left earbud in full battery state
"L" light on the charging case off
Right earbud in charging state
"R" light on the charging case on
Right earbud in full battery state
"R" light on the charging case off
Charging case in full battery state Displays 100%
Charging for earbuds Displays the percentage of remaining
power of charging case
Charging case in low battery state Displays 5%
Settings Bluetooth
DBK02
Bluetooth
Now discoverable as”Qi iPhone”.
MYDEVICES
To pair Apple Watch with your iPhone, go to the
Watch app.
Earbuds indicator
Status Light
Turn on Blue light flashes for 1 second Then the red and
blue light flash
alternately
Turn off Red light goes out after flashing for one second
Search earbuds Red and blue light flash alternately
The earbuds
connect successfully
After successful pairing, the light of the
main ear flashes alternately in red and blue
Music play No light
Connect with mobile
phone successfully
Blue light of both earbuds flash
once circularly
every 6s
Low battery Red light of earbud flashes once every 6s
Charging Red light on
Full battery
Red light off
Specifications
Version V5.2+EDR
Support HFP,HSP,A2DP,AVRCP
Transmission distance 10m
Frequency range 2.402GHz~2.480GHz
Speaker Φ 8.2mm*2
Impedance 16 Ω
Standby time 60 hours
Talk time 4 hours
Playing time 4 hours
Earbud battery capacity 40mAh
Fully charged time 1 hour
Charging case battery capacity 500mAh
Charging time of charging case About 1.5 hours
Weight (single earbud) 4.0 g
Charging case indicator
Restore factory setting
1.When the earbud is on with mobile phone unconnect-
ed, click the left and right power switch simultaneously
four times quickly. The red and blue lights will be on for 2
seconds and then it will clear its memory and the earbuds
will shut down.
2.Please delete all paired records on thephone and
search again for "DBK02"on the bluetooth of mobile phone
and reconnect.
There is a built-in lithium battery in this
product. To avoid explosion, do NOT
expose the product to strong sunlight,
fire or throw it into fire.
Battery Warning ！
Attentions 1.Do not use corrosive liquid to clean this product.
3.Do not use this product under extreme circumstances
for temperature
below -10 degree Celsius or above 60 degree Celsius .
4.To avoid explosion, please do not throw this product
into fire.
5.To avoid scratches, please do not touch the earbuds
with sharp objects.
6.Do not insert objects into the earbuds, otherwise it would cause damage
to the internal components.
7.Do not disassemble the earbud.
8. Please keep regular charge to earbuds, don’t leave
them become empty
battery status to keep their lifetime.
9. Please do not charge products with power adapter over 2A
current. Excessive current may cause the damage to battery.
2.If it comes into contact with chemicals, please rub it with a damp
cloth wet with clean water.
4x
IOS and part of the Android users can triple click the left or
right power switch to turn on the voice assistant.
Siri and other Voice Assistant
3x
Bluetooth
Forget This Device
DBK01
Device Type
Forget Device
cancel
The voice assistant will be automatically activated depends in
different OS in mobile system.
Charging
Full battery
Charging
for earbuds
L&R Earbud
910 11 12
13
14
15
16
Please make sure that the products are dry. If there is
water droplet on the surface, please wipe it with a dry
cloth before putting them back into the charging case to
avoid demaging the device.
Charging case：Please use a charger with an output voltage of
DC5V/1A to charge the charging case. You can also use a computer
USB or other USB interface charger to charge (Must choose a charger
certified by a regular manufacturer）.
Charging indicator of Right earbud
Charging indicator of Left earbud
Remaining power of charging case
Put the earbud in the charging case, and the lid must be
closed to charge it, and they will automatically turn off and
disconnect when the charging case lid is closed.
Steps of charging for earbuds:
Notice: If the charging case is out of power, it may cause the earbuds
to fail to shut down and remain connected to the phone even when
they are placed in the charging case. So please remerber to charge
the charging case in time.
Status White light
Left earbud in charging state
"L" light on the charging case on
Left earbud in full battery state
"L" light on the charging case off
Right earbud in charging state
"R" light on the charging case on
Right earbud in full battery state
"R" light on the charging case off
Charging case in full battery state Displays 100%
Charging for earbuds Displays the percentage of remaining
power of charging case
Charging case in low battery state Displays 5%
Settings Bluetooth
DBK02
Bluetooth
Now discoverable as”Qi iPhone”.
MYDEVICES
To pair Apple Watch with your iPhone, go to the
Watch app.
Earbuds indicator
Status Light
Turn on Blue light flashes for 1 second Then the red and
blue light flash
alternately
Turn off Red light goes out after flashing for one second
Search earbuds Red and blue light flash alternately
The earbuds
connect successfully
After successful pairing, the light of the
main ear flashes alternately in red and blue
Music play No light
Connect with mobile
phone successfully
Blue light of both earbuds flash
once circularly
every 6s
Low battery Red light of earbud flashes once every 6s
Charging Red light on
Full battery
Red light off
Specifications
Version V5.2+EDR
Support HFP,HSP,A2DP,AVRCP
Transmission distance 10m
Frequency range 2.402GHz~2.480GHz
Speaker Φ 8.2mm*2
Impedance 16 Ω
Standby time 60 hours
Talk time 4 hours
Playing time 4 hours
Earbud battery capacity 40mAh
Fully charged time 1 hour
Charging case battery capacity 500mAh
Charging time of charging case About 1.5 hours
Weight (single earbud) 4.0 g
Charging case indicator
Restore factory setting
1.When the earbud is on with mobile phone unconnect-
ed, click the left and right power switch simultaneously
four times quickly. The red and blue lights will be on for 2
seconds and then it will clear its memory and the earbuds
will shut down.
2.Please delete all paired records on thephone and
search again for "DBK02"on the bluetooth of mobile phone
and reconnect.
There is a built-in lithium battery in this
product. To avoid explosion, do NOT
expose the product to strong sunlight,
fire or throw it into fire.
Battery Warning ！
Attentions 1.Do not use corrosive liquid to clean this product.
3.Do not use this product under extreme circumstances
for temperature
below -10 degree Celsius or above 60 degree Celsius .
4.To avoid explosion, please do not throw this product
into fire.
5.To avoid scratches, please do not touch the earbuds
with sharp objects.
6.Do not insert objects into the earbuds, otherwise it would cause damage
to the internal components.
7.Do not disassemble the earbud.
8. Please keep regular charge to earbuds, don’t leave
them become empty
battery status to keep their lifetime.
9. Please do not charge products with power adapter over 2A
current. Excessive current may cause the damage to battery.
2.If it comes into contact with chemicals, please rub it with a damp
cloth wet with clean water.
4x
IOS and part of the Android users can triple click the left or
right power switch to turn on the voice assistant.
Siri and other Voice Assistant
3x
Bluetooth
Forget This Device
DBK01
Device Type
Forget Device
cancel
The voice assistant will be automatically activated depends in
different OS in mobile system.
Charging
Full battery
Charging
for earbuds
L&R Earbud
910 11 12
13
14
15
16
Please make sure that the products are dry. If there is
water droplet on the surface, please wipe it with a dry
cloth before putting them back into the charging case to
avoid demaging the device.
Charging case：Please use a charger with an output voltage of
DC5V/1A to charge the charging case. You can also use a computer
USB or other USB interface charger to charge (Must choose a charger
certified by a regular manufacturer）.
Charging indicator of Right earbud
Charging indicator of Left earbud
Remaining power of charging case
Put the earbud in the charging case, and the lid must be
closed to charge it, and they will automatically turn off and
disconnect when the charging case lid is closed.
Steps of charging for earbuds:
Notice: If the charging case is out of power, it may cause the earbuds
to fail to shut down and remain connected to the phone even when
they are placed in the charging case. So please remerber to charge
the charging case in time.
Table of contents
