LCD MONITOR FEATURES AND CLEANING
Monitor Features
•19-inch (483 mm) TFT color LCD monitor
•100mm x 100mm VESA mounting pad
•EPA EnergyStar®Compliant
•Ergonomic design (complies with MPRII)
•Space-saving, compact case design
•Integrated power supply
•3-point Display position adjustment (tilt, pivot and height)
The following occurrences are normal with an LCD monitor and do not indicate
a problem.
•Due to the nature of the internal fluorescent backlights, the screen may
flicker during initial use. If this occurs, turn off the monitor and then turn it
on again, making sure the flicker disappears.
•You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
•The LCD screen has an effective pixel count of 99.99% or more. It may
include blemishes of 0.01% or less, such as a missing pixel or a pixel lit
all of the time. Refer to Appendix F for additional details.
•Due to the nature of the LCD screen, an after-image or ghost of the
previous image may remain after switching the image when the same
image is displayed for a long time. In this case, you can recover the
screen slowly by changing the image or turning off the monitor for a few
hours.
•The life of the internal fluorescent backlights used in the LCD monitor is
approximately 30,000 hours. Contact MPC Technical Support or an
authorized dealer for a replacement when the screen is dark, flickering, or
not lighting up. Never attempt to replace the light yourself. Refer servicing
to qualified personnel only.
Cleaning the Monitor
To keep the monitor looking new, periodically clean the monitor’s case with a
soft cloth. As a safety precaution, always unplug the monitor before cleaning
it. Stubborn stains on the monitor’s case can be removed using a damp, dust-
free cloth and a mild detergent solution. Never apply water directly to the LCD
screen. Always apply the water to the cloth first, and then wipe down the
screen. You can also purchase and use monitor wipes to clean the LCD
screen.
