Mpow MPHM251 User manual

USER MANUAL
ELECTRONIC ALARM
CLOCK
ALARM CLOCK RINGTONES
① In the Time Display mode, press “+” button
once, it will play one ringtone.
② Press the “+” button once more, it will switch
to other ringtone. Three ringtones can be
changed circularly.
③ Each ringtone will automatically turn off
after 5 minutes. The last ringtone you
selected will be set as the alarm sounds.
NOTE: Before selecting the ringtones, please
push the button to the “LOCK” position.
TIME SETTING
① To enter the time setting, push button to
the “Time” position, and then the minutes
start to ash. Press the “+” button allows you
to increase the value of minutes by one.
NOTE: Press and hold the “+” button to
increase the value quickly.
② Press the “-” button allows you to decrease
the value of minutes by one.
NOTE: Long press the “-” button to decrease
the value rapidly.
③ When the time is set, push the button back
to the “LOCK” position.
④ During Time Displays, press the “-” button
to change the time format of 12/24 hours.

SNOOZE FUNTION (SNOOZE
TIME: 9 MINUTES)
BRIGHTNESS ADJUSTABLE
(Off-Dim-Bright-Brighter)
① When the alarm is activated, the alarm
icon will be displayed on the screen. When
the alarm is sounding, the alarm icon will
ash, press the “Snooze” button once to
temporarily stop the alarm. It will sound
again after 9 minutes.
② When the alarm is sounding, press “+” or “-”
button to turn off the snooze function, the
alarm will stop sounding.
NOTE: The following are the two ways to turn
off the alarm. The rst way is to press the “+”
or “-” button to temporarily stop the alarm,
and the alarm will sound on the next day. The
other approach is to push the button to “OFF”
to turn off the alarm permanently. As your
schedule changes, you can turn on the alarm
again via pushing the button to or .
In the Time Display mode, press “Snooze”
button to adjust the brightness of the LED
display: Off/Dim/Bright/Brighter.
ALARM CLOCK SETTING
ALARM VOLUME (OFF-LOW-
HIGH)
① To access the alarm clock setting, push the
button to “Alarm” position. Press the “+”
button once, the minute increases by one.
Note: Press and hold the “+” button to scroll
quickly.
② Press “-” button to decrease the value of
minutes. Note: Long press the “-” button to
decrease rapidly.
③ When the alarm is set, push switch to the
“LOCK” position.
① To turn down the alarm volume via push
button to .
② To turn up the alarm volume via push
button to .
③ To shut off the alarm via push button to “OFF”.