MR DJ USA INC PBX4000BAT User manual
2
Congratulations on your new PBX4000BAT
Portable Speaker with Built-In Battery
By MR DJ
General Features: Packa
g
e Contents:
2-Way 15” Portable Active PA Speaker 1 PC Portable Loud Speaker
2000 Watts P.M.P.O 2 PC Wireless Microphone
MP3 Player Built-In with LCD Display 2 PC Microphone Holder
SD Card Slot, USB Connection Ready 1 PC Remote Control
FM Radio, Bluetooth Music Streaming 1 PC Power Cord
50 oz High Efficiency Mid - Low Woofer
2” KSV Voice Coil
1.35” Titanium Diap. Driver
(
Tweeter
)
Speaker RMS:350 Watts
Driver RMS:50 Watts
7A,12V Built-in Batter
y
Supports 16GB USB/SD Readers
3
4
5
6
7
1. Default Power Selected is 110v (For Asia / European Market) Please choose correct voltage. (Refer to Page 6 -
Illustration No. 20)
2. Connect power cord to wall outlet then to the back of the unit
(Refer to Page 6 - Illustration No. 18)
3. Plug the Microphone or Guitar into the 6.35mm Input or (Mic Input 1/2)
(Refer to Page 6 - Illustration No. 4)
4. Turn On Wireless Microphone receiver switch to activate Wireless Microphone
(Refer to Page 6 - Illustration No. 14)
5. To control both Microphone A and Microphone B Volume Levels
(Refer to Page 6- Illustration No. 15)
6. Connect Your Selected Audio Source (CD, DECK, MP3 Player, DVD, etc) on “LINE IN” Input via RCA
(Refer to Page 6 - Illustration No. 7)
7. Turn on the speaker. A green LED will light up to indicate the speaker is on
(Refer to Page 6 - Illustration No. 19.)
8. Monitor LED Charging Indicator (When On - Charging of Unit is Activated)
(Refer to Page 6 - Illustration No. 21)
9. Insert USB or SD Card for MP3 Player (Does Not Support Large Storage Cards - 16GB Max) (Refer to Page 4
- Illustration No. 2)
10. Select the Player Mode to either Bluetooth, USB or MP3 or FM through the selector.
(U - USB or S - SD Card) - (Refer to Page 6 - Illustration No. 1)
11. Set TREBLE, BASS, ECHO, MIC LEVEL, VOLUME controls to equalize the sound.
(Refer to Page 6 - Illustration No. 3/11/12/13)
12. Line-Output Connection via RCA (Refer to Page 6- Illustration No. 8)
13. To use Wireless Remote Control - Remote must have access to the I.R. Receiver
(Located In Front of Speaker)
14. For DC Power Interface Access (Refer to Page 6 - Illustration No. 18)
8
