MR. RESISTOR MOD01WIFIMR User manual

MOD01WIFIMR
WI-FI CARD FOR CONTROLLING A DEVICE THROUGH THE WISE DIRECT APP
Product code
WI-FI CARD CONNECTION
DOC.: T991.01
MOD01WIFIMR DATE: 03/08/22
This document is the property of Teleco Automation Srl, which reserves all reproduction and copyrights
Warning: before insert the MOD01WIFIMR into the connector turn the
power supply o.
MOD01WIFIMR
Connector
TELECO DEVICE*
Power supply 5-12Vdc
Max. output power 500mA
Operating temperature range -20°C +50°C
Protection rating IP20
Frequency band 2.4GHz
TECHNICAL SPECIFICATIONS
* Follow product device manual for conguration
MR RESISTOR
Wise House, 21 Lydden Road, Wandsworth, London, SW18 4LT
Telephone: [phone] Fax: [phone]
www.wisecontrols.com [email protected]

2
Download the Wise Direct APP from the App Store or Google Play or using the IOS or Android QR Code.
Check compatibility with your device rst.
QR Code IOS QR Code Android
Scan the QR code with
your phone camera.
Digit this password 000000
to set the device
INSTALLATION
CONFIGURATION

3
Problem Solution
The WI-FI net is not detected check correct assembly (from product manual)
The product it is non correctly controlled
Check the LED on the module if it is steady ON the module is not communicating correctly
with the product on which it is mounted.
In normal conditions the led ashes 1/2 times every second according to the network
conguration
x1
Within the power ON... Press 1time the Pbutton on the WI-FI board and
keep it pressed for 5 s.
ON
the LED ashes fast
Apply this label to the device case. The product label it can be nd in the packaging.
WISE - DIRECT PRODUCT LABEL
RESET OF THE PASSWORD TO FACTORY DEFAULT
TROUBLESHOOTING (WHAT TO DO IF…)
keep it pressed
( 5 s)
LED

IMPORTANT! READ CAREFULLY THESE INSTRUCTIONS BEFORE INSTALLING AND COMMISSIONING THE
PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
PRODUCT INSTALLATION: The product at issue must be installed, commissioned and maintained only by licensed and
authorised people, respecting the laws concerning the electrical installations. The manufacturer is not responsible for any
damage due to wrong installation or improper use.
SAFETY INFORMATION: The radio signal reception of the device could be disturbed by the presence of electrical disturbances
being transmitted by other appliances working on the same frequency or if the product is somehow shielded by metal parts.
The manufacturer, Teleco Automation s.r.l, declares that the type of radio equipment is compliant with Directive 2014/53/EU.
The full text of the EU compliance declaration is available at the following Internet address: www.telecoautomation.com/ce.
In the view of a constant development of their products, the manufacturer reserves the right for changing technical data and
features without prior notice.
INFORMATION TO USERS under art. 14 of the 2012/19/EU DIRECTIVE OF THE EUROPEAN PARLIAMENT AND
COUNCIL of 4 July 2012 on waste electrical and electronic equipment (WEEE). The crossed bin symbol on the equipment,
or its packaging, indicates that the product must be collected separately from other waste at the end of its useful life and not
with mixed urban waste. Please contact your municipality, or local authority, for all information regarding the waste sorting
systems available in the area. The retailer is obliged to collect the old equipment free-of-charge when the customer buys
a new equivalent equipment. This is to encourage correct recycling/disposal. Appropriate waste sorting for the subsequent
recycling,reatment and disposal in an environmentally sound way of the disused equipment avoids negative e󰀨ects on the
environment or human health and favours the re-use or recycling of the equipment’s materials.
WARNING
A product of:
www.telecoautomation.com
This document is the property of Teleco Automation Srl, which reserves all reproduction and copyrights