MrHeater MHGLLP B User manual

Single lamp Corner double lamp
Balanced double lamp Triple lamp
ENERCO GROUP INC., 4560 W. 160TH ST., CLEVELAND, OHIO 44135 • 216-916-3000 20303 Rev. A 07/08
INDOOR GAS LAMP
OPTIONAL CHANDELIER KIT
READ INSTRUCTIONS CAREFULLY: Read all information and instructions, including Gas lamp
Warning Tag attached to light, before installation or use. Retain this guide for future reference.
MHGLLP B
MHGLLP G
Model #
PARTS LIST AND ASSEMBLY INSTRUCTIONS
AVAILABLE CONFIGURATIONS (LAMPS NOT INCLUDED)
For corner double and triple
lamp configurations
Connect 1/8” plug to •
2-outlet distributor.
Attach the 3/8” pipe to •
2-outlet distributor.
Insert 3/8” pipe through ceiling •
canopy and canopy holding ring.
Tighten the canopy holding screw.•
Attach the 3-outlet distributor •
to bottom of 3/8” pipe.
Use 3 long nipples for triple•
lamp or 2 long nipples for
corner double lamp.
Attach lamps (not included)•
elbow joint(s)
Connect top distributor•
to gas line.
For balanced double and
single lamp configurations
Connect 2 1/8” plugs to •
3-outlet distributor.
Attach the 3/8” pipe to •
3-outlet distributor.
Insert 3/8” pipe through ceiling •
canopy and canopy holding ring.
Tighten the canopy holding screw.•
Attach the 2-outlet distributor •
to bottom of 3/8” pipe.
Use 2 short nipples for •
balanced double lamp or 1
short nipple for single lamp.
Attach lamps (not included)•
to elbow joint(s)
Connect top distributor•
to gas line.
9
6
78
5
4
3
2
1
Maintain a minimum of 4”clearance to ceiling,
wall, or any other combustible surface.
Gas supply (1/8 NPT female) 3/8”
tubing is recommended.
Before operation, check for any possible
leaks and tighten all connections.
Parts List
Item
No. No. Stock No. Description
1 3 20360 1/8” NPT pipe plug
Used to plug
unused ports
2120398 2-outlet distributor
Used for balanced
double lamp
configurations
3 1 20373 Ceiling canopy
Conceals opening
in ceiling
4 1 20387 Canopy holding ring
5 1 20374 Canopy holding screw
6 1 20355 3/8” x 16” pipe
7120378 3-outlet distributor
Used for corner
double and triple
lamp configurations
8320377 1/8” NPT x 13/16”
short nipple
Used for double lamp
configurations
320379 1/8” NPT x 1 1/2”
long nipple
Used for triple lamp
configurations
9320348 1/8” FPT x 1/8” MPT
elbow joint
Connects into
valve of light