MSI K7 Master MS-6341 User manual

Introduction
1-1
Introduction
The MS-6341 ATX mainboard is a high-performance computer
mainboard based on AMD® 761 chipset and VT 2C6 6B. The MS-6341 is
designed for the AMD® Duron & Thunderbird processors for inexpensive
business/personal desktop markets.
The AMD-761 system controller features the AMD Duron system
bus, system memory controller, accelerated graphics port (AGP) controller,
and peripheral component interconnect (PCI) bus controller. The AMD-761
system controller is also designed to support 200MHz or 266MHz DDR
SDRAM DIMMs.
The VT 2C6 6B integrates all system control functions such as ACPI
(Advanced Configuration and Power Interface). The ACPI provides more
Energy Saving Features for the OSPM (OS Direct Power Management)
function. The VT 2C6 6B chipset also improves the IDE transfer rate by
supporting Ultra DMA-33/66/100 IDE that transfers data at the rate 33/66/
100MB/sec.
This chapter contains the following topics:
Mainboard Specifications 1-2
Mainboard Layout 1-4
Quick Components Guide 1-5
Key Features 1-6
MSI Special Features 1-7


Chapter 1
1-2
Mainboard Specification
CPU
!Socket A for AMD® DuronTM & AthlonTM processors
!Support 700/750/ 00/ 50/900/950MHz, 1GHz, 1.2GHz or up
Chipset
!AMD® 761 chipset. (569 BGA)
- Supports 200 or 266MHz High speed, split transaction system bus.
- AGP 4x and PCI Advanced high performance memory controller
- Support 200 or 266MHz DDR SDRAM technology
!VIA® VT6 6B chipset. (352 BGA)
- Enhanced Power Management Features
- Integrated Super I/O (FDC, LPT, COM 1/2, and IR)
- Dual bus Master IDE Ultra DMA33/66/100
- Integrated Hardware Soundblaster
- Direct Sound AC97 Audio
- ACPI
Clock Generator
!100 or 133Mhz clocks are supported. (200 or 266MHz Internal System
Bus)
Main Memory
!Support 4 memory banks using two 1 4-pin DDR-DIMM
!Support a maximum memory size of 2GB
Slots
!One AGP(Accelerated Graphics Port) Pro slot
- AGP 4x mode
!One CNR(Communication Network Riser) slot
!Five 32-bit Master PCI Bus slots
!Supports 3.3v/5v PCI bus Interface
On-Board IDE
!An IDE controller on the VIA® VT6 6B Chipset provides IDE HDD/CD-
ROM with PIO, Bus Master and Ultra DMA 33/66/100 operation modes.
!Can connect up to four IDE devices

Introduction
1-3
Audio
!Chip Integrated
- Direct Sound AC97 Audio
On oard Ultra 160 SCSI Connector
!Adaptec AIC-7 99
-supports high performance 160Mbytes/sec Dual Channel Ultra SCSI
-supports Ultra(SE) devices
On-Board Peripherals
!On-Board Peripherals include:
- 1 floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and 2.
Mbytes
- 2 serial ports (COMA + COM B)
- 1 parallel port supports SPP/EPP/ECP mode
- 4 USB ports (2 Rear Connectors/USB Front Pin Header)
- 1 IrDA connector for SIR/FIR/ASKIR/HPSIR
- 1 Audio/Game port
BIOS
!The mainboard BIOS provides Plug & Play BIOS which detects the
peripheral devices and expansion cards of the board automatically.
!The mainboard provides a Desktop Management Interface(DMI) function
which records your mainboard specifications.
Dimension
!ATX Form Factor: 30.5cm x 25.9cm
Mounting
!9 mounting holes
Note:
Please use 200MHz system bus/100MHz clcoks for PCB v1.0 and use 266MHz
system bus/133MHz clcoks for PCB v1.1.

Chapter 1
1-4
Mainboard Layout
MS-6341 ATX Main oard
JFP1
FDD
SCSI 2
SCSI 1
CNR JP1
BIOS
JMDM
SYSFAN
IDE1
JGS1
IDE2
AGP PRO SLOT
PCI Slot 1
PSI Slot 2
PCI Slot 3
PCI Slot 4
PCI Slot 5
AGP Power Su ly
CD-IN
AUX_IN
MDM_IN
PS_FAN
Codec
DDR-DIMM 2
DDR-DIMM 1
D-LED
CPUFAN
Socket A
ATX
Power Su ly
JKBV1
Top: Mouse
Bottom:
Keyboard
USB
Top: ort 1
Bottom: ort 2
Top: L T
Bottom:
COMA
COMB
Top: Midi/
Game ort
Bottom:
Line-Out
Line-in , Mic
BATT
+
JP3
JWOL1
JBAT1
VT82C686B
Ada tec
7 8 9 9
SCSI 3
USB2
JIR1
AMD761
Chi set

Introduction
1-5
Quick Components Guide
Component Function Reference
DDR-DIMM 1&2 Installing memory modules See p. 2-4~2-5
Socket Installing CPU See p. 2-2~2-3
CPU/PS/SYS F N Connecting to CPU/PS/SYS F N See p. 2-17
TX Power Supply Installing power supply See p. 2-6
IDE1& IDE2 Connecting to IDE hard disk drive See p.2-12
FDD Connecting to floppy disk drive See p.2-11
SCSI 1~ SCSI 3 Connecting to SCSI interface See p. 2-18
USB2 Connecting to USB interface See p. 2-11
GP Pro Slot Installing GP card See p. 2-23
PCI Slot 1~5 Installing expansion boards See p. 2-23
JFP1 Connecting to case See p. 2-13
JMDM Connecting to modem card See p. 2-15
JWOL1 Connecting to L N card See p. 2-15
JGS1 Connecting to power saving switch See p. 2-16
JIR1 Connecting to IrD infrared module See p. 2-16
JB T1 Clearing CMOS data See p. 2-19
JKBV1 Setting keyboard wake-up function See p. 2-20
JP1 Setting audio onboard See p. 2-20
JP3 Setting CPU core bus ratio See p. 2-21

Chapter 1
1-6
Key Features
!Microsoft® PC99 compliant
!D-LEDTM - 4 LEDs embedded in mainboard
!PC AlertTM III system hardware monitor
!CPU: Socket A for AMD® DuronTM & AthlonTM processors, 700/750/
00/ 50/900/950MHz, 1GHz, 1.2GHz
!Form Factor: ATX, 30.5 cm x 25.9cm
!Clock: 100MHz (200MHz Internal System Bus)
!Chip Integrated Audio: Direct Sound Ac97 Audio
!Memory: 2DIMM. Max, up to 2GB DDR SDRAM
!Wake up on LAN Function
!I/O: 2 serial ports. 1 parallel port, 4 USB ports, 1 floppy port, 1 IrDA
connector, 1 Audio/Game port
!Slot: 1 AGP Pro slot, 1 CNR slot, 5 PCI slots

Introduction
1-7
MSI Special Features
The MSI special features are designed by MSI R&D which are only
available in MSI mainboards. The 6341mainboard is equipped with PC AlertTM
III and D-LEDTM.
PC AlertTM III
The PC AlertTM III is a utility you can find in the CD-ROM. The utility
is just like your PC doctor that can detect the following PC hardware status
during real time operation:
* monitor CPU & system temperature
* monitor fan speed
* monitor system voltage
* monitor chassis intrusion
If one of the items above is abnormal, the program main screen will be imme-
diately shown on the screen, with the abnormal item highlighted in red. This
will continue to be shown until user disables warning.

Chapter 1
1-8
Features:
!Network Management
- Monitoring & remote control
!Basic System Utilities
- Scandisk & Defragment to maintain your HDD
!3D Graphics Design
- Enables a more friendly user interface
!Software Utilities
- SoftCooler Optimized Cooling
- Doctor Y2K Diagnoses Y2K problems
- BusRacing function adjusts F.S.B under Windows 95/9
- MoSpeed Speeds up your modem transmission

Introduction
1-9
The D-LEDTM uses graphic signal display to
help you understand your system. There are 4 LEDs
embedded in the mainboard which provides up to
16 combination of signals to debug system. The 4
LEDs can debug all problems that fail the system,
such as VGA, RAM or other failures. This special feature is very useful for the
overclocking users. The users can use this feature to detect if there are any
problems or failures while doing the overclocking.
D-LEDTM
Red Green
D-LED
System Power On
-The D-LED will hang here if the processor is damaged or
not installed properly.
Early Chipset Initialization.
emory Detection Test
-Testing onboard memory size. The D-LED will hang if the
memory module is damaged or not installed properly.
Decompressing BIOS image to RA for fast booting.
Initializing keyboard controller.
Testing VGA BIOS
-This will start writing VGA sign-on message to the screen.
Processor Initialization
- This will show information regarding the processor (like
brand name, system bus, etc...)
Description
 !"

Chapter 1
1-10
D-LED
Testing RTC (Real Time Clock)
Initializing Video Interface
- This will start detecting CPU clock, checking type of video
onboard. Then, detect and initialize the video adapter.
BIOS Sign on
-This will start showing information about logo, processor
brand name, etc...
Testing Base and Extended emory
-Testing base memory from 240K to 640K and extended
memory above 1 B using various patterns.
Assign Resources to all ISA.
Initializing Hard Drive Controller
- This will initialize IDE drive and controller.
Boot Attempt
- This will set low stack and boot via INT 19h.
Operating System Booting
Description