MSI MS-6367 User manual

Introduction
1-1
Chapter 1. Introduction
Chapter 1. Getting Started
Thank you for purchasing the MS-6367 v1.X M-ATX mainboard. The
MS-6367 mainboard is a superior computer mainboard based on nVIDIA Crush
11 & MCP-D chipsets for optimal system efficiency. Designed to fit the ad-
vanced AMD®Duron/Athlon processors in the 462 pin package, the MS-6367
mainboard delivers a high performance and professional desktop platform
solution.
1
Getting Started
TOPICS
Mainboard Specification 1-2
Mainboard Layout 1-5
Quick Components Guide 1-6

Chapter 1
1-2
CPU
Supports Socket A for AMD®Duron/Athlon processor
Supports 650MHz, 700MHz, up to 1.5GHz or higher
Chipset
nVIDIA®Crush 11 chipset
- AGP 4x (1.5V only)
- Supports 200/266 MHz FSB
- 64-bit / 128-bit DDR memory controller
- Integrated GeForce2 MX-class advanced Graphics Processing Unit
- LDT interface to MCP (800MB/sec max)
- Multiplex DVI / TV Interface with AGP Slot
nVIDIA®nFORCE MCP-D (Media Communications Processor)
- Dual ATA/100 controller
- USB OHCI 1.0a up to 6 ports
- IEEE 802.3 compatible MAC (MII)
- Integrated Audio Processor Unit
- AC 97 2.1 Compliant Interface
- Dolby Digital S/PDIF output function
MainMemory
Supports 2 DDR DIMM
Supports a maximum memory size of 1GB
Supports either 64- or 128-bit system memory
Slots
One AGP 2.0 4x 1.5V slot
Three 32-bit Master PCI 2.2 Slots
Supports 3.3/5V PCI bus Interface
On-BoardIDE
An IDE controller on the MCP/MCP-D chipset provides IDE HDD/CD-
ROM with PIO, Bus Master and Ultra DMA 100 operation modes.
Can connect up to four IDE devices
Mainboard Specification

Introduction
1-3
Audio
Chip integrated (6 channels audio)
APU integrated in MCP-D (Audio Processing Unit)
- Supports up to 256 hardware-processed voices or 64 hardware voices
in 3D
- Supports multi-speaker 3D audio (2/4 channel)
- S/PDIF interface (MCP-D)
Video
256-bit 3D and 2D graphics accelerator
2nd generation T & L engine, nVIDIA Shading Rasterizer-NSR
Multiplex DVI/TV interface with the AGP slot
PC2001 compliant SMA and operates with either 64-bit or 128-bit system
memory installed
Network (Optional)
Chip Integrated
- 10/100 BaseT Ethernet/Fast Ethernet
On-Board Peripherals
On-Board Peripherals include:
- 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and
2.88Mbytes.
- 1 serial port (COMA)
- 1 parallel port supports SPP/EPP/ECP mode
- 6 USB ports (2 rear connectors and 2 USB front pin headers- 4 ports)
- 1 IrDA connector
- 1 Audio/Game Port
- 1 VGA Port
BIOS
The mainboard BIOS provides Plug & Play BIOS which detects the
peripheral devices and expansion cards of the board automatically.
The mainboard provides a Desktop Management Interface (DMI) func-
tion which records your mainboard specifications.

Chapter 1
1-4
Dimension
M-ATX Form Factor: 9.6 inch x 9.6 inch
Mounting
6 mounting holes
Others
LAN Wake Up function
Modem (Internal/External) Ring Wake Up function
PC99 Color Connector

Introduction
1-5
Mainboard Layout
MS-6367 Micro ATX Mainboard
Note: One unique MAC Address label is attached on PCI Slot 3 of the
motherboard that supports LAN. The label looks like the picture
below but its number varies depending on the board you purchased.
MAC Address Label
BATT
+
nVIDIA
nFORCE
MCP-D
DIMM2
DIMM3
J10
J9
JGS1
JSPDIF1
ATX
Power Supply
JFP1
SOCKET 462
BIOS
PCI Slot 3
Codec
PCI Slot 2
PCI Slot 1
nVIDIA
CRUSH 11
IDE2
IDE1
Top : Parallel Port
Bottom:
COM A
VGA port
JBAT1
SW2
Top : mouse
Bottom: keyboard
Top: LAN Jack
Bottom: USB
ports
CD1
CPUFAN1
SYSFAN1
Winbond
W83627HF-AW
AUX1
To p :
Game port
Bottom:
Line-Out
Line-In
Mic
FDD1
AGP Slot

Chapter 1
1-6
Quick Components Guide
Component Function Reference
SW2 CPU FSB Selection jumper See p. 2-4
JWR1 ATX 20-pin Power Connector See p. 2-7
JKBMS1 Mouse Connector See p. 2-8
JKBMS1 Keyboard Connector See p. 2-9
USB Connectors Connecting to USB devices See p. 2-9
COM A Connecting to Serial port See p. 2-10
VGA Connector Connecting to VGA port See p. 2-10
LPT1 Parallel port connector See p. 2-11
Game/Audio Connectors Connecting to Game/Audio devices See p. 2-12
RJ-45 LAN Jack Connecting to LAN devices See p. 2-12
FDD1 Floppy disk drive connector See p. 2-13
IDE1~ IDE2 Hard disk connectors See p. 2-14
JFP1 Case connectors See p. 2-15
CD1 CD-in connector See p. 2-17
AUX1 Aux line-in connector See p. 2-17
JGS1 Power Saving Switch Connector See p. 2-17
JCASE1 Chassis intrusion switch See p. 2-18
J9 & J10 Front USB connectors See p. 2-18
CPUFAN1/SYSFAN1 Fan power connectors See p. 2-19
JSPDIF1 SPDIF Connector See p. 2-20
JAUDIO1 Front panel audio connector See p. 2-21
JBAT1 Clear CMOS jumper See p. 2-22
AGP Slot Connecting to expansion cards See p. 2-23
PCI Slots Connecting to expansion cards See p. 2-23

Hardware Setup
2-1
Chapter 2. Hardware Setup
TOPICS
Central Processing Unit: CPU 2-2
Memory 2-5
Power Supply 2-7
Back Panel 2-8
Connectors 2-13
Jumpers 2-22
Slots 2-23
2
Hardware Setup
This chapter provides you with the information about hardware setup
procedures. While doing the installation, be careful in holding the components
and follow the installation procedures. For some components, if you install in
the wrong orientation, the components will not work properly.
Use a grounded wrist strap before handling computer components. Static
electricity may damage the components.

Chapter 2
2-2
1. Pull the lever sideways away
from the socket. Then, raise
the lever up to a 90-degree
angle.
Central Processing Unit: CPU
CPU Installation Procedures
2. Look for the cut edge. The
cut edge should point
towards the lever pivot. The
CPU will only fit in the
correct orientation.
The mainboard supports AMD®Athlon and Duron processors.
It uses a CPU socket called Socket A for easy CPU installation. Make sure
the CPU has a Heat Sink and a cooling fan attached on the top to prevent
overheating. If you do not find the Heat Sink and cooling fan, contact your
dealer to purchase and install them before turning on the computer.
Open Lever
Cut edge
Sliding
Plate
Close
Lever
Press down
the CPU
3. Press the CPU down firmly
into the socket and close the
lever. As the CPU is likely to
move while the lever is being
closed, always close the lever
with your finger pressing
tightly on top of the CPU to
make sure the CPU is properly
& completely embedded into
the socket.
Overheating will seriously damage the CPU and system,
always make sure the cooling fan can work properly to
protect the CPU from overheating.
WARNING!

Hardware Setup
2-3
As processor technology pushes to faster speeds and higher performance,
thermal management becomes increasingly crucial when building computer
systems. Maintaining the proper thermal environment is key to reliable
operation. As such, the processor must be maintained in the specified thermal
requirements.
AMD Athlon/Duron processor with a speed of 600MHz and above re-
quires LARGER heatsink and fan. You also need to add thermal grease be-
tween the CPU and heatsink to improve heat dissipation. Then, make sure that
the CPU and heatsink are securely fastened and in good contact with each
other. These are needed to prevent damaging the processor and ensuring
reliable operation. If you want to get more information on the proper cooling,
you can visit AMDs website for reference.
WARNING! Thermal Issue for CPU

Chapter 2
2-4
CPU Core Speed Derivation Procedure
If CPUClock = 100MHz
Core/Bus ratio = 7
then CPU core speed = Host Clock x Core/Bus ratio
= 100MHzx7
= 700MHz
CPU FSB Selection Jumper: SW2
To use a 133MHz CPU, you need to set the SW2 jumper to short 1-2 pin.
To use a 100MHz CPU, set the SW2 jumper to short 2-3 pin.
SW2
1
FSB = 133MHz FSB = 100MHz
3
1
3
1
Overclocking
This motherboard is designed to support overclocking.
However, please make sure your components are able to
tolerate such abnormal setting, while doing
overclocking. Any attempt to operate beyond product
specifications is not recommended. We do not guarantee
the damages or risks caused by inadequate operation or
beyond product specifications.
WARNING!