MT-POWER AUDIO RFW-60R V2 User manual

7
WIRELESS
SPEAKER
USER MANUAL
MULTI-ROOM MUSIC SOLUTION
Airplay Function
For iPhone, iPad and iMac smart device with ios operating system, you can use the Wi-Fi speaker with
Airplay function. Connect your device to the speaker Wi-Fi. In the pull-up menu, click Airplay and choose
the Wi-Fi speaker, then the sound can be steamed from your smart device.

21
Component Checklist
Specification
Wi-Fi feature:
• Built-in Wi-Fi
• Wireless standard: 802.11b/g/n
• Support online audio streaming media
• Support audio format: MP3/WMA/AAC/ACC/ACC+/ALAC/APE/WAV
Amplifier feature:
• Type: Class D(digital)
• RMS Power:2x30W/8ohm
• Power input :DC24V/2.5A
Speaker:
• Frequency response:65Hz-20KHz
• RMS power:2x30W
• Impedance:8 ohms
• Sensitivity(1w/1m):90dB
• Woofer:6.5"Kevlar woven cone
• Tweeter:0.75" Titanium dome
• Treble attenuation:+3dB/-3dB
Mount ing Hol e
Cut-O ut Templ ate
WIRE LESS
SPEAKER
USER MAN UAL
MULTI-RO OM MUSI C SOLUT ION
Wi-Fi Speaker Passive Speaker
Manual Mounting Ho le
Cut-Out Temp late Power Adaptor
Mount ing Hol e
Cut-O ut Templ ate
WIRE LESS
SPEAKER
USER MAN UAL
MULTI-RO OM MUSI C SOLUT ION
Wi-Fi Speaker Manual
Mounting Ho le
Cut-Out Temp late Power Adaptor
LED indicator: indicate the power, wifi and music working status.
R+(Red) R-(Black): to link passive speaker to stream stereo sound.
RCA: to connect with your home TV set.
Power input: connect with DC adaptor to offer power supply for the speaker.
WPS: the trigger to configure multi-room music network or restore the device to original default settings.
RCA-(Black)
RCA+(Red)
Component Checklist
Parts Of The Wi-Fi Speaker
Component Checklist
Package Contents
R- (Black)
R+ (Red)
Power input
LED indicator
WPS button

1. Controller APP Installation
Please search "Smartsonix" to download controller app
from Google Play (Android) or Apple App Store (IOS).
Component Checklist
Controller APP Installation
Step 2 Switch the Wi-Fi function and connect your
phone to the Wi-Fi
Step 1 Connect the Wi-Fi speaker to power supply
Step 4 Enter the password of the router and click
NEXT. Please make sure the router is available in
your space.
Step 3 Start the controller APP smartsonix and
click ADD DEVICE
2. Wi-Fi Speaker testing
Before your Wi-Fi speaker is installed into ceilings, please arrange testing to make sure the device
properly works.
Step 6 Later a progress diagram comes, wait for a
few seconds, the device will be connected to your
router automatically. If fails, click RETRY and
repeat the operation of step 4 and step 5.
Step 5 Press the WPS button on the back of the
speaker to configure network and click NEXT.
Step 8 After setting, the Wi-Fi speaker will be in
the device list. If you have more than 1 Wi-Fi
speakers, add devices and name them
accordingly. After these steps, your multi-room
music network is successfully established.
Step 7 Name the device according to the room you
will install and click FINISH.
43
Wi-Fi
speaker

Step 9 Choose a device and play a song in your phone to test whether the device works. If ok, testing
finishes and you can forward the speaker installation.
3. Wi-Fi Speaker Installation
Equipment you will need:
Besides template that is included in the box, you must have a ladder and the equipment shown below to
guarantee installation go smoothly.
Step 1 Use enclosed template to mark out the cut
out, then simply cut along the line. This is the only
cut you will need to make.
Step 3 Connect the jack of DC adaptor to the Wi-Fi
speaker and install the speaker into ceiling. The
installed place should be in accordance with the
room you have set in the controller APP.
Installation dimension: Φ 210 mm
Installation depth: ＞102mm
65
Step 2 Place the DC adaptor in a suitable place in
your wall or ceiling, leave the plug end and jack
end. During speaker installation, please make
sure the adaptor is cut out from power supply.
Step 4 To enjoy stereo sound and achieve better
sound quality, you can install another passive
speaker to be paired with the Wi-Fi speaker. Lying
loudspeaker cable from passive to the R+ and R-
connectors of the Wi-Fi speaker.
Lying diagram between Wi-Fi speaker and passive speaker or home TV set.
Cables should be lain before Wi-Fi speaker installed.
Step 5 Cover the grill for the installed speaker and connect the plug of DC adaptor to the power supply.
Device Resetting
If the multi-room network fails during operation, you can press the WPS button to restore the speaker to its
original factory default settings.
Uninstall the Wi-Fi speaker from ceiling and press the WPS button for around 5 seconds, during this
operation, make sure the speaker is power supplied.
Device Personal setting
Rename: If you found Wi-Fi speaker wrongly named after installation, you can rename the device to a
correct one.
Speaker info: Each Wi-Fi speaker will launch wireless signal, to protect the Wi-Fi from embezzling by
others, you can set password for your device.
Wi-Fi
speaker
Wi-Fi
speaker