MUBVIEW PK 320 User manual

A Smarter Safety Solution
Smart PTZ Indoor Camera

Warranty Service
Thanks for your shopping and trust.
We have been optimizing our products and improve our
lifetime customer service to oer you a better shopping
experience.
If you have any problems, please feel free to write us
e-mail We will solve your problems within 24 hours.
In addition, your advice or suggestions will be much
appreciated and welcomed.
Product Service
Email:[e-mail]
Distributor: [e-mail]
Tel: [phone] (Mon-Fri 9:00 AM-5:00 PM EST)
More About Us
Web: www.mubview.com
Facebook:www.facebook.com/mubview
Register via link below to get 3 Years
Warranty Extension. (Or scan the QR code)
https://bit.ly/3zBSB2y

*Please reset the camera before connecting to APP.
Solid blue
Lens
Microphone
Status Indicator
Light
Reset Button
Reset Button
LED Indicator
Status
TF card slot
Speaker
Charging power supply
Camera Introduction

The camera supports Android and iOS system.
Please scan the QR code below or search 'MUBVIEW' in App store
to download the App, and follow the instruction to register
account. If you encounter any problems during the installation
process, please feel free to contact us via [e-mail]
Sign up in App with your email address.
Choose your region and correct country code
(Users from dierent regions cannot share the camera).
Download & Install App
Account Registration

1. Allow 'MUBVIEW' App to access mobile cellular data and
wireless LAN, or it will fail to add camera.
2. Allow 'MUBVIEW' App to receive pop-up messages,
otherwise the smart phone will not receive notification
when motion is detected.
①MUBVIEW oers a free 7-day cloud storage with the basic version,
or you can insert a Micro SD card into the camera to store videos.
②The camera works with 2.4GHz and 5GHz Wi-Fi.
③When connecting to network, please take the camera closer to
your WiFi router, to ensure a stable network signal.
Preparations for Connection

Tap to Add Device Select Bulb Camera Check Power
Reset Camera Input Wi-Fi
Password Prepare to Scan
Connect the Camera to App

Scan QR Code
With Device Wait For Connection Add Successful
Click Next Network Diagnostic Add Device
Complete
Note: If the camera fails to connect to the network, press and hold the reset button
for more than 5 seconds, and connect again after hearing the beep. If it still fails,
please email us [e-mail]

Multi-User Sharing
Click '+'to add
more devices
Watch 4 cameras
live at the same time
Camera can be shared to others in two ways:
1. Let her/him view but cannot control the camera.
2. Let her/him view and control the camera.
Share steps:
1. Camera User download App to his/her phone and
register his new account in App.
2. Click 'Add' in App on Camera Owner's phone.
3. Camera Owner scan Camera User's QR Code or input
Camera User's account ID.
4. Camera User accept share.

FAQ
Failed to add during network configuration?Q:
Please turn on the camera and power it on, press
and hold the Reset button for more than 5
seconds, after the camera is reset successfully,
reconnect the camera, if it still fails, please contact
us at [e-mail]
A:
After scan adding is still unsuccessful?Q:
Restart the device or power o the device after scan
adding is still unsuccessful, and then try to add it again.
A:
The device cannot preview normally?Q:
Please check if the network signal is too weak, please
put the camera close to the router, if still cannot
preview, reset the camera and add it again.
A:
After resetting the device, why is the camera still in
the device list?
Q:
Resetting the device only to reset the camera's
network configuration but cannot change the
configuration on the APP, to delete the camera you
must log in the APP to delete.
A:
How to switch the camera network to another router?Q:
First remove and reset the device on the APP, and
then configure the network for the device again
through the APP.
A:

FCC ID: 2AYJN-QB320
Made In China