MUNBYN IMC02 User manual
Name
Signature
Date
Prepared by:
Byron Zhong
Reviewed by:
Approved by:
User Manual
IMC02 Counterfeit Detector
Document Name:
IMC02 User Manual-1.02.docx
1.02
Page2of12
IMC02 Counterfeit Detector User Manual
Version 1.02
Version History
Date
By
Changes
Version
2020-12-05
Byron Zhong
Initial Version
1.00
2021-1-16
Byron Zhong
Add the EUR/GBP Currency Detecting Section
1.01
2021-6-01
James Hu
Add the Maintenance
1.02
Page3of12
IMC02 Counterfeit Detector User Manual
Version 1.02
Contents
Version History................................................................................................................... 2
1.0. Overview................................................................................................................. 4
1.1. Preface...............................................................................................................................4
1.2. Abbreviation........................................................................................................................4
2.0. Packing Open and Installation.................................................................................. 5
2.1. Packing List ........................................................................................................................5
2.2. Power Supply......................................................................................................................5
3.0. Operating Instructions............................................................................................. 6
3.1. Display Appearance............................................................................................................6
3.2. Turn On/Off the Machine.....................................................................................................6
3.3. Button Functions.................................................................................................................6
3.3.1. CUR/DIR....................................................................................................................6
3.3.2. REP/CLR....................................................................................................................7
3.4. Inserting the Banknote Correctly.........................................................................................7
3.5. EUR/GBP Currency Detecting ............................................................................................7
4.0. Maintenance.......................................................................................................... 9
4.1. Error Code..........................................................................................................................9
4.2. Inaccurate Detection of Currency Detector .........................................................................9
5.0. Technical Parameters ............................................................................................ 10
Page4of12
IMC02 Counterfeit Detector User Manual
Version 1.02
1.0. Overview
1.1. Preface
Thank you for purchasing our products. The IMC02 is the best solution for the banknote counterfeit detection.
This user manual describes the operation steps and precautions for this product. In order to improve the use and
working efficiency of the product, please read this manual carefully before using, so as to operate the product
accurately. Please contact us if you encounter any problem.
We reserve the right to change the contents of this user manual at any time without notice.
Figure 1-1 IMC02 Counterfeit Detector
1.2. Abbreviation
Table 1-1 Abbreviations
Abbreviation
Definition
USD
United States Dollar
EUR
Euro
GBP
Great Britain Pound
LBP
Lebanese Pound
AED
United Arab Emirates dirham
CFD
Counterfeit Detection
IR
Infrared
MG
Magnetic
UV
Ultraviolet
Page5of12
IMC02 Counterfeit Detector User Manual
Version 1.02
2.0. Packing Open and Installation
2.1. Packing List
When you receive the package, open and check the packing list in the package.
Table 2-1 Packing List
Item Name
Picture
Quantity (pcs)
Description
Counterfeit Detector
1
Bill Counterfeit Detector
Battery
1
11.1V 500mAh rechargeable battery
Power Adapter
1
Power Adaptor
User Manual
1
2.2. Power Supply
DC Power: Connect the power adapter to a 110V or 220V outlet, then connect the terminal to the machine’s
DC12V input socket.
Lithium Battery (optional): When the battery was fully charged, the machine can work without power adapter.
Page6of12
IMC02 Counterfeit Detector User Manual
Version 1.02
3.0. Operating Instructions
3.1. Display Appearance
Figure 3-1 IMC02 Display Appearance
3.2. Turn On/Off the Machine
Figure 3-2 IMC02 Power Interface
Turn on the IMC02 by switch the power switch button to on, the screen will light up and the machine will start
self-testing. If the self-test is successful, the number of banknote and the denomination will show as ‘0’.
Turn off the IMC02 by switch the power switch to off. When the screen lights off, it means the machine has
been turned off successfully.
3.3. Button Functions
3.3.1. CUR/DIR
The CUR/DIR button is used to choose the currency or the banknote exit direction.
3.3.1.1. Choosing the Currency
In the detection mode, the IMC02 will recognize the currency type automatically, so pressing “CUR/DIR”
button cannot choose the currencies manually.
In the report mode, press the button to choose the currencies to check the report detail.
Currency Type
Banknote Exit
Direction
CUR/DIR Button
Number of
Banknotes
Denomination
REP/CLR Button
Power switch
button
Page7of12
IMC02 Counterfeit Detector User Manual
Version 1.02
3.3.1.2. Choosing the Direction
Keep pressing the button about 2 seconds until you hear the “di” sound, then release the button. The direction
indicator will be changed.
The denotation of direction will be shown on the top part of the display. Up means the genuine banknote will go
out from exit and down means the genuine banknote will retreat from the feeding hopper.
3.3.2. REP/CLR
Press the button to check the pieces of each denomination, keep pressing the button for about 2 seconds to clear
the records.
After finish detecting banknotes, press “REP/CLR” to enter report mode. Display will show the currency type,
pieces of each denomination and total value. You can switch to another currency by pressing “CUR/DIR”.
While checking the record, if you feed banknote, the detector will automatically exit the report mode.
3.4. Inserting the Banknote Correctly
As shown in the following pictures, please insert the banknotes in the left side. If a banknote was incorrectly
inserted, the IMC02 may refuse it and alert.
Figure 3-3 Banknote Insertion
3.5. EUR/GBP Currency Detecting
As shown in the following figures, please remove the banknote feeding limit block to adjust the banknote with
bigger size.
Figure 3-4 Banknote Insertion
Right
Wrong
Wrong
The banknote feeding limit block
Page8of12
IMC02 Counterfeit Detector User Manual
Version 1.02
Figure 3-5 EUR Banknote Detecting
Page9of12
IMC02 Counterfeit Detector User Manual
Version 1.02
4.0.Maintenance
4.1. Error Code
Table 1 Error codes
Code
Error Message
Handing Method (recommendation)
E01
Length exceeds
Please check whether the banknote is in good condition and place
the banknote to the left again.
If the alarm continues, length calibration is required.
E02
Length alarm
E03
Half a banknote
Please check if the banknote is complete.
E06
Double banknote
Please put in only one banknote.
E07
Tilted banknote
Please put the banknotes to the left.
E10
Failed to refund
Please check if your banknotes are too old or too soft.
E11
Basic image error
This may be a counterfeit currency.
Please check whether the banknotes are damaged, severely
wrinkled, or dirty.
E40
UV
Please turn on the machine and clean the inside of the machine
before checking banknotes.
If the error continues, it means that the UV module has been
damaged.
E41
UV image error
This may be a counterfeit currency. Please check whether the
banknotes are damaged, severely wrinkled, or dirty.
E60
Non-magnetic
Please clean the inside of the machine.
Please check whether there is magnetic interference around the
machine.
If the error continues, it means that the magnetic module is
damaged.
E61
Magnetic pulse 1 alarm
E62
Magnetic pulse 2 alarm
E63
Magnetic pulse 3 alarm
E64
Too much magnetism
E65
Magnetic prefix
E66
Image magnetism error
Please check if your banknotes are counterfeit.
4.2. Inaccurate Detection of Currency Detector
There are several conditions to affect the accuracy of the currency detector.
1) The bill size is out of the range according to IMC02 specification.
2) The banknote is damaged with different ways such as lack of corner, tape, hole, tear and folded. As shown
in Figure 4-1, it is not recommended to count this kind of bills.
Page10of12
IMC02 Counterfeit Detector User Manual
Version 1.02
Figure 4-1 Bill Damaged Ways
3) Other abnormal operation or there is unknown thing inside the IMC02.If something inside the IMC02, you
need to open the front cover to check, and clean the internal sensors.
4.3. ‘ADD’ function settings
Use the following steps to turn on/off the Add function.
1) Press ‘CUR/DIP’ and ‘REP/CLR’ at the same time for 5 seconds to enter the selection interface.
2) Press and hold the ‘CUR/DIP’ and ‘REP/CLR’ buttons simultaneously on the d_1 interface for 2 seconds to
enter the function selection interface.
3) Press the ‘CUR/DIP’ button 3 times to switch the mode to P22, and finally press and hold the ‘REP/CLR’
to switch the value of P22 to 0 to turn on the Add function, and switch the value of P22 to 1 to turn off the
Add function.
Demo video: https://munbyn.biz/IMC02ADD
Page11of12
IMC02 Counterfeit Detector User Manual
Version 1.02
5.0. Technical Parameters
Table 2 Technical Parameters
Counterfeit Detection
MG (Magnetic), IR (Infrared), UV (Ultraviolet)
Error Detection
Image, paper quality, size, thickness detection
Available currencies
USD, EUR, GBP, LBP, AED, MXN
Display
LED display
Button
CUR/DIR, REP/CLR
Interface
USB, software upgrade interface
Detecting Speed
<0.5 seconds/piece
Power Consumption
<10W
Power Supply
Battery
AC 100V-240V 50-60Hz or DC 12V/1.0A
Rechargeable lithium battery 11.1V / 500 mAh
Certifications
CE, FCC, ROHS
Operating Temperature
0°C - 40°C
Storage Temperature
-20°C - 65°C
Counterfeit Detection
MG (Magnetic), IR (Infrared), UV (Ultraviolet)
Error Detection
Image, paper quality, size, thickness detection
Available currencies
USD, EUR, GBP, LBP, AED, MXN
Other manuals for IMC02
2
Table of contents
Other MUNBYN Security Sensor manuals
