6 Modification reserved • 19, rue de Rennes • BP 83221 • F - 35690 ACIGNÉ
1. SAFETY INSTRUCTIONS
— Control the loader only from the driver’s seat. Do not let go of the controls until the movements are complete.
— Do not leave the seat before locking the controls to prevent any movement.
— Never leave the tractor while its loader is lifted. Following loader use, park the tractor with the loader lowered to the ground.
— It is compulsory to ensure that nobody is in the area while the loader is in use.
— The operation must use the implement designed and recommended by MX for the work to be carried out.
— The transport or elevation of persons using the loader is forbidden.
— Ensure tractor stability by using a counterweight. Please check the information regarding the counterweight in this user
manual.
— Restrict all movements while the load is lifted as the tractor may become unbalanced.
— The maximum front axle safe load provided by the tractor’s manufacturer must not be exceeded.
— The maximum front tyres safe load provided by the tyres’s manufacturer must not be exceeded.
— Check regularly tyres pressure.
— Regularly check the presence of safety pins and bolts. Do not replace with any other object such as nails, wire, etc.
— Hitch the loader only to a tractor fitted with a roll-over protective structure (ROPS) or a falling object protective structure
(FOPS). This should be in the protective position when using the loader.
— Watch out for overhead electrical and telephone cables when manoeuvring with the loader in the raised position.
— In compliance with the standard EN 12525, the controls for operating the loader and implements must be of the «sustained
action» type with the exception of the lift floating position which can be maintained in its position by a notching system.
— Any activity relating to defect investigation ( diagnosis ) and / or disassembly of parts may only be undertaken by an
accredited professional who shall assure his safety and the protection of the environment in which the actvity is conducted,
in particular in the event of an activity involving the loader staying in the lifted position.
CAUTION !
— The loader’s hydraulic circuit is designed to have a maximum service pressure of 200 bar.
— Never modify hose connections.
— The breaking of the seals will result in the cancellation of the MX responsibility for all the equipment supplied.
— The assembly of an MX loader which excludes the recommendations in the MX price list in force at the purchase date,
cancels the MX guarantee on all the equipment supplied.
— Any modification to a section of any MX equipment (implements, loader, bracket, etc.) or the use of an implement or element
installed on the MX loader of foreign origin, cancels the MX guarantee for all equipment supplied.
— Use only MX original spare parts. Do not modify your MX loader or its accessories yourself or have another person modify
them (mechanical, electrical, hydraulic, pneumatic characteristics), without prior written agreement from MX. Failure to
respect these regulations may make the loader dangerous. MX will disclaim all responsibility in the event of damage or
injury.
— The guarantee is immediately invalid when the instructions for use, and the MX loader maintenance schedule outlined in
"User Manual" are not observed.
