MXN MXN26C User manual

Instruction Manual
◈Installation
• High resolution 1/3.2” Color Digital CMOS Camera
•Compact & Smart Design
•Easy adjustable in any viewing direction
•IP69K Waterproof Rating
•Diagonal 140°viewing
•Mirror / Normal Image function
•Built-in Microphone
•Low-illumination
•Low Power Consumption
▪Camera Assembly ▪Wiring to Monitor
N/C Audio out
Video out DC 5V-18V
GROUND
Camera pin configuration
Extension cable
(not included) Monitor
(not included)
MXN26C
* Design And Specifications Are Subject To Change Without Notice.
▪Normal / Mirror image
* Green cable loop un-cut : MIRROR IMAGE
* Green cable loop cut : NORMAL IMAGE
◈Features ◈Technical Specifications
Image Sensor 1/3.2” Color Digital CMOS Image Sensor
Effective Pixels PAL : 1.23Mega pixels
Resolution 750TV lines
Synchronizing System Internal
S/N Ratio More than 46dB
Minimum Illumination 0.5 Lux
Power Range DC 6V ~ DC 18V
Power Consumption DC 12V, 80mA (Max)
Operating Temp. -40˚C to +80˚C
Viewing Angle 140˚ (Diagonal), 110˚ (Horizontal), 85˚ (Vertical)
Video Output 1.0Vp-p Composite, 75 Ω
Material Aluminum Die-casting
Housing Color Black
Dimension Dome type 43(Φ) X 25.5(h) mm
Wall mount type 45.6(w) X 44.5(L) X 33.0(h)
Weight Camera only 23.5g / Adapter cable 31g
•Multi-purpose
•2 Bracket types included
•Small diameter waterproof connector, Φ6mm
•Anti-corrosive coating
•Operating temperature -40˚C ~ + 80˚C
•Vibration resistant
▪Camera Assembly
1. Assemble the bracket with camera according following drawing:
2. Attach the supplied mounting bracket to the vehicle, adjust the
viewing angle of the camera and fasten the screws firmly.
1. Assemble the bracket with camera according following drawing:
2. Attach the supplied mounting bracket to the vehicle, adjust the
viewing angle of the camera and fasten the screws firmly.
▪Adjustment of the camera in the bracket
1. Insert the U-shaped metal tool into 2 from total 4 holes in camera.
2. Adjust the camera carefully into the required image.
3. Fasten the 3 screws to fixate the camera’s viewing direction.
`
Adapter cable
(included)
Mini Color Camera
MODEL : MXN26C
Mirror / Normal image can be changed via the Green cable as below
The camera can be adjusted by using the U-shaped metal tool:
◈Camera with 2 types Mounting bracket
23.56
19.61
16.00
120.0˚
32.76
47.81
36.83
24.00
5.50 12.64
size: mm size: mm

Instruction Manual
◈Installation
• High resolution 1/3.2” Color Digital CMOS Camera
•Compact & Smart Design
•Easy adjustable in any viewing direction
•IP69K Waterproof Rating
•Diagonal 140°viewing
•Mirror / Normal Image function
•Built-in Microphone
•Low-illumination
•Low Power Consumption
▪Camera Assembly ▪Wiring to Monitor
N/C Audio out
Video out DC 5V-18V
GROUND
Camera pin configuration
Extension cable
(not included) Monitor
(not included)
MXN26CN
* Design And Specifications Are Subject To Change Without Notice.
▪Normal / Mirror image
* Green cable loop un-cut : MIRROR IMAGE
* Green cable loop cut : NORMAL IMAGE
◈Features ◈Technical Specifications
Image Sensor 1/3.2” Color Digital CMOS Image Sensor
Effective Pixels NTSC : 1.23Mega pixels
Resolution 750TV lines
Synchronizing System Internal
S/N Ratio More than 46dB
Minimum Illumination 0.5 Lux
Power Range DC 6V ~ DC 18V
Power Consumption DC 12V, 80mA (Max)
Operating Temp. -40˚C to +80˚C
Viewing Angle 140˚ (Diagonal), 110˚ (Horizontal), 85˚ (Vertical)
Video Output 1.0Vp-p Composite, 75 Ω
Material Aluminum Die-casting
Housing Color Black
Dimension Dome type 43(Φ) X 25.5(h) mm
Wall mount type 45.6(w) X 44.5(L) X 33.0(h)
Weight Camera only 23.5g / Adapter cable 31g
•Multi-purpose
•2 Bracket types included
•Small diameter waterproof connector, Φ6mm
•Anti-corrosive coating
•Operating temperature -40˚C ~ + 80˚C
•Vibration resistant
▪Camera Assembly
1. Assemble the bracket with camera according following drawing:
2. Attach the supplied mounting bracket to the vehicle, adjust the
viewing angle of the camera and fasten the screws firmly.
1. Assemble the bracket with camera according following drawing:
2. Attach the supplied mounting bracket to the vehicle, adjust the
viewing angle of the camera and fasten the screws firmly.
▪Adjustment of the camera in the bracket
1. Insert the U-shaped metal tool into 2 from total 4 holes in camera.
2. Adjust the camera carefully into the required image.
3. Fasten the 3 screws to fixate the camera’s viewing direction.
`
Adapter cable
(included)
Mini Color Camera
MODEL : MXN26CN
Mirror / Normal image can be changed via the Green cable as below
The camera can be adjusted by using the U-shaped metal tool:
◈Camera with 2 types Mounting bracket
23.56
19.61
16.00
120.0˚
32.76
47.81
36.83
24.00
5.50 12.64
size: mm size: mm