myBilding MINICOIL User manual

MINICOIL Manual Coil Binding
Machine - Round Hole
Instruction Manual

OPERATIONAL MANUAL
Coil Binding Machine
WARRANTY POLICY
YOUR HAS A WARRANTY OF 2 YEARS FROM
DATE OF PURCHASE. IN THE EVENT OF A MANUFACTUR-
ER’S DEFECT, MY BINDING WILL REPAIR OR REPLACE IT.
IMPORTANT: THIS WARRANTY DOES NOT COVER DAMAG-
ES DUE TO IMPROPER USE OR MISTREATMENT OF THE
UNIT, INCLUDING EXTRAORDINARY EVENT LEADING TO
THE DAMAGE OF THE MACHINE, WHETHER IT IS REVERS-
IBLE OR NOT.
MINICOIL-RE
MINICOIL-OE (pictured)
(with Electric Roller)
MINICOIL-R (pictured)
MINICOIL-O
(without Electric Roller)
MINICOIL R RE O OE
Capacity
Pitch
Hole Punch Round Round Oval Oval
Coil Insertion Manual Electric Manual Electric
Number of Holes
Format
Depth Margin
Side Margin Guide
Machine Dimensions
Weight & Volume
Warranty 2 Years
10 sheets (20 lb paper) or
2 sheets of plastic covers
4:1
12.8 lbs & 0.46 CbFt
15" x 10.5" x 5.5"
Adjustable
Adjustable
Letter
43 Holes
1-800-944-4573

ASSEMBLY
PUNCHING
COIL INSERTING
1) Place your on top of a sturdy table.
2) Install Punch Handle and tighten screw.
3) Plug in the power adapter (for models equipped with Electric
Roller).
COIL CRIMPING
FEATURES
Electric Roller Switch
(available on RE & OE
models)
Electric Roller
(available on RE & OE
models)
Punch Handle
Depth
Margin
Guide
Side Margin Guide
Waste Drawer
(below machine)
Paper
Entrance
12
3
1. Use Depth Margin Guide to set the preferred punching margin.
2. Move the Side Margin Guide to center the holes on your documents.
3. Insert the documents (10 sheets of 20lb paper max) and press down on
the Punch Handle to punch holes, then release back to original position.
Repeat Step 3 as needed.
4. Manually insert the coil into the first few holes.
5. For R/O models, manually insert into the rest of the holes (not pictured)
6. For RE/OE (with Electric Roller) models:
a) Press the Electric Roller Switch to turn on the roller.
b) Hold the document evenly against the roller, pressing slightly
against roller. After last hole insertion, remove the document
from roller to stop binding, then turn off Electric Roller Switch.
46a 6b
7. Cut and crimp both ends of the
coil with coil crimpers (not included).
7
Power Adapter
(available on RE &
OE models)